MikroTik

zimbola

I was referring to some coax , ethernet adaptor.
google presented me as MOCA

http://www.actiontec.com/products/14.php
but i don't think this will work either

zimbola

Thank you for the reply
I can use mikrotik behind my cable modem.
will MOCA + Mikrotik do the trick ?

zimbola

Thankyou my friend Yes I am 100% sure that MAC address is not the issue it has been perfectly cloned. No sir, I have not tried calling the ISP. I don't think they will allow using a router that was not provided by them and will not support incase of any problem. so trying to figure it out without th...

zimbola

still waiting for some helpful configuration guide.....................

zimbola

Hi Friends.
I have a MOTOROLA cable modem at my home from TWC.
I would like to replace it with Mikrotik router
Is there a Mikrotik Router with coax support available ?
Thanks

zimbola

Could well be that they are mac address locking their connections. Maybe just enquire? Mikrotik pppoe is nothing special. Username, password and interface is all you need really - that should give you the IP - anything else such as add default route etc will not affect the initial connection and al...

zimbola

Contact your ISP, they are probably dishing out a private IP for disconnected/cancelled radius accounts. Thanks paulct. I get a public IP when i use the TP-Link router provided by ISP. When i use Mikrotik it gets private IP. Do you think ISP might be blocking private device usage ? (to promote thei...

zimbola

Hi gurus is this information enough to fix problem?
pppoe interface is getting private ip 10.117.xx.yy previously it used to get public ip 182.xx.yy.zz and FYI I have paid for public ip.
thanks

zimbola

Hello Mikrotikers. I used to to have a PPPoE connection that used to work now i had to reset the router and create a new connection and it's not working Below is the ip route snapshot of it. ip route used to show this while working . https://s11.postimg.org/rs8vgr0b7/old_working.jpg uploading images...

zimbola

1. bad cable 2. bad connectors 3. bad machine 4. bad software on machine 5. bad switch (if there is one) You get the point. Looking at the options from 1-5, The device that shows "busy" should not be working but I can get ping reply and the device is working fine. So my newbie knowledge p...

zimbola

Greetings Friends.
What does "busy" mean in Dhcp lease in Mikrotik.
bound i can understand but what is "busy" is the machine still trying to acquire the IP.
Thanks

image sharing

zimbola

Have a lool here http://forum.mikrotik.com/viewtopic.php?t=22760

Sent from my iPhone using Tapatalk

Thanks mate.

zimbola

This one worked though. :for e from=3 to=100 do={ /queue simple add name="wlan1-user $e" target="192.168.1.$e" max-limit=384000/384000 queue=default/default total-queue=default } I just changed the " target-addresses " to " target " Sorry for posting in wrong ...

zimbola

It doesn't work for me it throws an error [admin@MikroTik] /system script> :for e from 1 to 100 do={ {... /queue simple add name=("IP-" . $e) \ {\... target-addresses=("192.168.1." . $e . "/32") \ expected end of command (line 3 column 1) [admin@MikroTik] /system script...

zimbola

Any guides friends ??
It is really annoying if i have to manually add all the 100 IP's to queues.

zimbola

Hello Friends.
I have more than 100 IP offered by DHCP.
I would like to create queues for all those IP in one shot
is it possible in one shot??? Or i have to do it manually one by one for 100 IP's

zimbola

I was thinking to create a new topic since it closely matches mine. I'm adding my question here. let's suppose i need to block 22.34.xxx.xxx/<i don't know the subnet> how can i do that so that the ip starting with 22.34.whatever.should. be blocked. Thanks The mask doesn't need to match what the act...

zimbola

You would create an Address List. Enter each IP into the list, then use src-address-list. /ip firewall address-list add address=1.1.1.1 list=Trusted add address=1.1.1.2 list=Trusted add address=1.1.1.3 list=Trusted /ip firewall filter add chain=input src-address-list=Trusted I was thinking to creat...

zimbola

Finally solved the issue following this link --> https://yaleman.org/2014/10/23/hairpin- ... tik-v6-19/
Special Thanks to StillHard for giving hint as HAIRPIN. I was totally lost before as what the search string should be for my problem.
Have a wonderful day friends

zimbola

Use HAIRPIN 8) Yes I looked HAIRPIN nat after you mentioned but i'm not quite sure either it will solve my problem or not in the link http://wiki.mikrotik.com/wiki/Hairpin_NAT some where it is written as below. There is no way to avoid this without either using a router that can do application leve...

zimbola

Nope, I'm not using proxy. My scenario is some what similar to http://superuser.com/questions/677068/server-remote-ip-always-returns-ip-address-of-the-default-gateway-router-for It's actually not a MikroTik Problem. I just am not able to configure it the way i want. Thanks I can understand the loca...

zimbola

Nope, I'm not using proxy.
My scenario is some what similar to http://superuser.com/questions/677068/s ... router-for
It's actually not a MikroTik Problem. I just am not able to configure it the way i want.
Thanks

zimbola

Greetings friends. I have setup a internal web server for testing purpose. and have a .php script that should display the ip address of the client that accessed the page IP address shows routers ip instead of users <?php $ipadress = $_SERVER['REMOTE_ADDR']; echo "Your IP Address is $ipadress&qu...

zimbola

Thanks ZeroByte
Now I got it

It's the Terminal window that i opened while connecting via winbox.
Feeling Enlightened

zimbola

ok Thank you for the information.
Yes ZeroByte that's my IP Address.
But i'm puzzled it should say connected via winbox NOT Telnet.
Might it be a bug ?

zimbola

Greetings Friends I have setup few firewall rules and preferred to log. My log files shows as figure below am i being scanned, pinged, hacked ? http://i61.tinypic.com/141mvfb.png Also i never login via SSH/Telnet i use only winbox and the log is saying "logged in via telnet" any thing wron...

zimbola

Seems like http://gregsowell.com/?p=3485
worked for me..
Thanks greg

zimbola

okay my dst-nat rule looks like this now

1 ;;; To Force use our DNS
chain=dstnat action=redirect to-ports=53 protocol=udp
dst-address-list=!local-lan dst-port=53 log=no log-prefix=""

I think i'm doing right.
Thanks

zimbola

Yes you can create graph using SNMP.

Enable SNMP at ip>snmp
Create graph at tools>graphs

i can see the graphs after adding interface on Tools->Graphing
No need to enable snmp
this what i am looking for --->https://www.lisenet.com/2014/snmp-on-mi ... nd-router/

zimbola

You can use ip accounting or simple queues.

is it possible to save those data like (logs,graphs,simple queues, accounting) in to plugged USB storage in Mikrotik
so that i won't run out of disk space or without SNMP server it's not possible ?
Thanks

zimbola

[admin@MiktoTik] > ip firewall nat print
Flags: X - disabled, I - invalid, D - dynamic
0 X ;;; place hotspot rules here

1 chain=dstnat action=redirect to-ports=53 protocol=udp dst-port=53 log=no
log-prefix=""

[admin@MiktoTik] >

Worked great!!

zimbola

Exit with exit button on left and reload the session when connecting again. It keeps layout sometimes. Sometimes not. That's how it is.... It won't work if i just press the exit button even without closing the queue window. here is what worked for me... 1) I customized my queue columns. 2) Sessions...

zimbola

Yes. You should: 1.- Set up your own DNS (tick IP > DNS: Allow remote requests 2.- Set up a firewall NAT dstnat rule to redirect all outgoing DNS requests (UDP port 53) to the routerboard (tip: action redirect) So you will be catching all outgoing UDP requests to port 53 and bypassing them directly...

zimbola

Use the small arrow on the right side to add or remove columns.

Yes it gets added for the current session but when i exit winbox and connect again the columns are back to default as above in picture 2
Thanks

zimbola

Hello friends. I have configured in my home network, that all users in network use OPEN DNS 208.67.222.222 and 208.67.220.220 which i did through DHCP Server. To Block bad sites.. Yesterday one of my friend came with his laptop , changed his dns settings manually and ... .... you can understand what...

zimbola

Greetings Friends. I have a made a very simple queue I adjusted the menus to display "download" "upload" but when i exit the winbox and connect again. My customized menus are not there the default menu get displayed. I guess the snapshot will make my saying clear. Is there any wa...

zimbola

@ 69adn69
please go through--> http://forum.mikrotik.com/viewtopic.php?f=3&t=38050

zimbola

Windows 7 uses newer smb protocol that is not supported by router os. So smb doesn't work.

Does it mean XP is supported ??

zimbola

Start with:
/ip firewall filter

Thanks friend.

zimbola

Good Morning friends. I was trying to Implement dropping port scanner via firewall rules following this article--> http://wiki.mikrotik.com/wiki/Drop_port_scanners but when i copy and paste the first line of script it throws an syntax error message. http://i58.tinypic.com/n67twj.png can anybody plea...

zimbola

It was really a nice experience................. :) :D after Mikrotik start formatting my USB drive. I disconnected the drive after 10 secs but the format process has started so i'm unable to get the disk mounted with file system, it's unallocated now. Final Conclusion. USB in Mikrotik only for 3g d...

zimbola

It says Invalid,

. Does the file system format needs to be ext2,3. i guess NTFS, FAT32 aren't supported)

zimbola

just found it inside
IP->SMB

I guess it should help me share my video on USB Harddrive over LAN

zimbola

sorry, I dig into too old (2010) post.
I get this when i was searching for USB HDD SMB share in Mikrotik RoS.
Have any body done it ??

zimbola

Wow... Now i can see the clear blue sky... Thanks a ton for blowing off the clouds.. I don't know when i will reach people like your's level of expertise :-) Many Thanks Friend I've been at this for quite some time now - as long as you enjoy learning about networks and always try to learn more, and...

zimbola

Well, 0 is the default distance for a default gw from DHCP and 1 is the default for pppoe. This is just normal. It's a bit unusual to intentionally configure dhcp and pppoe client at the same time on the same interface, though. That's why you got the unusual behavior. If the dhcp is there just to g...

zimbola

Oh yes. Raspberry Pi used to freeze when i used a USB CAM that i was testing as a surveillance camera after i bought a USB powered HUB and connected through it. It is working now. By the way yes i was also trying to create some sort of SMB Share in RB951Ui-2HnD so that i can share/watch videos over ...

zimbola

Thank you boen_robot for the firewall script & ZeroByte.for the description. I could have just copy pasted the script in terminal... but currently going through http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/Filter which will help me better understand the script so that i can modify it as per ...

zimbola

Hello Admins & Mods, Is there a button ? To Mark it as Solved ???

zimbola

Well, 0 is the default distance for a default gw from DHCP and 1 is the default for pppoe. This is just normal. It's a bit unusual to intentionally configure dhcp and pppoe client at the same time on the same interface, though. That's why you got the unusual behavior. If the dhcp is there just to g...

zimbola

Good Day to you Friends. Finally i have managed to connect mikrotik router on internet with the help from this forum's memeber "ZeroByte", Now all clients devices are able to browse internet through it. Now I would like to secure my router with a simple firewall rule to prevent outside att...

zimbola

This is a duplicate thread.

I answered it in the other thread http://forum.mikrotik.com/viewtopic.php?f=13&t=95419

Thanks ZeroByte your suggestion worked.
Sorry for the duplicate post.

zimbola

I'm getting a loop of strangled\double beep code, and the pc try's to connect again. David loop of strangle\double beep code sounds like a hardware issue to a newbie like me Have you tried with hard reset. 1) Unplug the power of router. 2) press the reset button . 3) Plug the power button while pre...

zimbola

As per the Doctor's Instruction. I changed the settings ZeroByte mentioned. It worked like a charm. http://i60.tinypic.com/ruy1zr.png One thing i'm concerned is, if i have to make the same type of DSL PPPoE connection at my friends apartment then do i have to do it the same changes manually. i.e. Ch...

zimbola

Greetings Friends. I used to have a DSL Tplink router (for PPPoE connection). I replaced it with RB951Ui-2HnD I'm stuck with making a simple PPPoE Client connection. Is it possible that my ISP is blocking cloned MAC (from Tplink). Though The PPPoE Connection is established and able to ping the gatew...

zimbola

Greetings Friends. I used to have a DSL Tplink router (for PPPoE connection). I replaced it with RB951Ui-2HnD I'm stuck with making a simple PPPoE Client connection. Is it possible that my ISP is blocking cloned MAC (from Tplink). Though The PPPoE Connection is established and able to ping the gatew...

Search found 56 matches