2 beeps means that RouterOS is booted up successfully.
Access your device by MAC-Winbox, click on "..." to find and access device,
http://wiki.mikrotik.com/wiki/Manual:Fi ... tup#Winbox

Thanks serjejs!
I do a 30-30-30 reset method 3 times and is live know.

There is no such thing as "30-30-30 RULE METHOD" for RouterBoards. What you should try is this: 1. Press reset button, power on the device and immidiately release the reset button. This will hopefully start the router with backup bios. If it boots up, you should upgrade your firmware. 2. ...

2 x Internet Connections (WANs) (Internet connection 1, and internet connection 2) Seprate ADSL companies 1 x MikroTik RouterBoard RB2011UiAS-2HnD-IN WiFi Broadband Routers 4 x Ubiquiti UniFi UAP Wireless-N Managed PoE Access Point (300Mbps) 1 x (PC running unifi controller) - Controller allows for...

Attach a console cable and use hyperterm or similar to observe the boot process. Per the instructions in the wiki you will be able to force it into net install mode from there. Also, make sure you have a static ip on your computer interface connected to your rb411. Connect directly via ethernet. Th...

Hi, I wrote a topic on monday about a big project I'm on but since it is getting a bit complicated to get all working together I decided to make 3 smaller topic about my main issue. How am I supposed to tell the router that eg. port 5 is a Wan port ? The first port is already configured as a WAN po...

Hello! I bought RB260GS (SN 416501B3C3E4/340) at 2014 for my home lan. First time it broke after 3 days of working: I could not connect to web-interface and it stop work even as a simple switch. I reinstalled SwOS firmware to version 1.10 by this instruction . After this switch was working as shoul...

http://u.indo.fm/i/4XuvU.png Hi guys, My RB750G was ok, but suddenly all LAN disconnected, only power LED is on. Then I tried to unplug the power then plugging it back in but still no luck. I also tried to press the reset button for 10 seconds (hoping for a system reset) but no luck either. Any clu...

Do you hear any beeps, when power is applied?
Are there any actions with LEDs?

Yes normal beeps. No board dammages or issues. I think the ethernet ports are damage.

Hi! My reuterboard 450g works fine for couple of days. Suddenly the green led turn off. I try everything form Winbox, net-install to hard reset etc... but no success. Inside the board i dont see any damages on any components. My diagnosis is that the ports are damage. Also i noted that when look for...

I heard normal beeps. Also check the board inside and seems no damages in the components.

Yes it beeps 2 times. One beep at boot and 2 beeps after. The bard is in good conditions i dont see eny wrong or damages.

Thanks

My reuterboard 450g works fine for couple of days. Suddenly the green led turn off. I try everything form net-install to hard rest etc... but no success. Do my board is fry? Also i noted that when look for the the default ip it seems not hte 192.168.88.1 insteda the ip i see is 169.254.2.100 / 255.2...