<e>[/quote]</e></QUOTE> @sindy, I was under the false impression that the Obi device poles the Router every 6 seconds so I was speculating that once the connection was removed that the Obi would be forced to re-establish the connection .... apparently my speculation is <B><s> </s>not correc<e> </e><...

Hi, A VoIP technician asked me to to turn off SIP ALG in my RouterBoard RB750. Unfortunately, I have no idea what that is Do I just disable the SIP entry under Service Ports in the Firewall page? Thanks. Luke. There is a lot of confusion about sip alg. As far as I can tell it has nothing to do with...

Hi ZeroByte, I'd like to use this router to be able to apply a different network on each of the interfaces ether2, ether 3, ether 4 and ether 5. Thanks, Brett ZeroByte has covered this well but if you run into difficulty like I have done when I first did this and forget to go to the DHCP Networks s...

would you please show me step by step I am a microtik beginner sorry I had a similar problem where I was trying to use a PC in my wan network ( same as yours) to open the GUI of an ata in the lan network. I ended up needing 2 firewall nat rules. 1 chain=dstnat action=dst-nat to-addresses=192.168.88...

Hi, Im new here, my name is Dave, i have an issue with my mikrotik and is that i am unable to configure the priorization of Voip with tos/dscp in my mikrotick, the version is v6.15. If you just want to change the dscp marking in pkts coming from an ata then all you need is a firewall/mangle rule li...

Problem solved. The gigaset has some security feature which will only allow the GUI to be open by a request coming from its own network. All my requests were coming from a pc in the 192.168.1.0/24 network using dst-nat and were failing. Added a src-nat rule to change the incoming request to replace ...

unless i'm not understanding what you are saying you'll need to port forward on the Mtik to that the 192.168.1.x subnet can talk past the nat to the 192.168.88.x subnet Thanks for your response but I have had no joy with this. I tried to PF networks as you posted then tried with specific device ips...

Thanks but that by itself doesn't work and just times out. I think that I need a port forwarding rule to make use of dstnat to get to the 192.168.88.0 network but the ones I tried didn't work either.

I have just got a RB750 and it is setup pretty much with default setting. Ether1(wan 192.168.1.3) connected to a tplink adsl modem/router. A pc (192.168.1.2) is also connected to the tplink. Ether 2 of the 750 is connected to a gigaset IP phone (192.1.88.251) and a laptop (192.1.88.252) connected to...