MikroTik

darkmanlv

tried today this script on hex s 7.16, adlist loading to memory, works perfect! thanks!

darkmanlv

also scheduled this script to run every 30 seconds, now LTE always works when needed: :local ipPing ("1.1.1.1") :local pingip :set pingip [/ping $ipPing count=5] :if ($pingip = 0) do={ :log info ("ping lost") /interface lte disable lte1 delay 5000ms /interface lte enable lte1 } t...

darkmanlv

Did you do a LTE firmware upgrade as well?

I already was on latest lte firmware, EG18EAPAR01A13M4G_01.002.01.002

darkmanlv

Very interesting that. Which ROS was it before you upgraded? before it was on 7.15.2 no any disconnect for 30 hours already, speed test checked at night time: speedtest.PNG ps: it is not operator something did, i had problems for last months every day... DoH timeouts, disconnects and reconnects, tu...

darkmanlv

Problem resolved by installing 7.16beta3, then 7.16beta4. No more disconnects for already >24 hours and speed always >50 MBit/s, at night 190 MBit/s

darkmanlv

Maybe someone can help to resolve situation with bad working LTE? Signal strength always good, but speed are low and lose internet connection too often, time out connection to DoH server, ping lost packets, etc operator BITE, Latvia, <1 km from tower tried to lock to band 20, to 7, same situation......

darkmanlv

Importing the "DigiCert Global Root G2" PEM from https://www.digicert.com/kb/digicert-root-certificates.htm

thanks, now works

/tool fetch https://cacerts.digicert.com/DigiCertAssuredIDRootG2.crt.pem
/certificate import file-name=DigiCertAssuredIDRootG2.crt.pem passphrase=””

darkmanlv

same problem here, started after 20pm Riga time... on all sites "DoH server connection error: SSL: ssl: no trusted CA certificate found"

can`t find which new certificate to install, tried already 10 different but with no luck...

please share URL

darkmanlv

You could also block based on FQDN - for example: /ipv6 firewall address-list add list=block_site address=www.google.com /ipv6 firewall filter add chain=forward place-before=1 connection-state=new dst-address-list=block_site out-interface-list=WAN action=reject reject-with=icmp-admin-prohibited Doe...

darkmanlv

Hello. How to configure mikrotik so it will force use of ipv4 for some sites? I have configured sit tunnel to tunnel broker, but some sites not open or blocked in ipv6, so i want to use ipv4 for them instead. Tried to create statis DNS entries, but PC still use ipv6 addresses to connect (nslookup sh...

darkmanlv

7.8beta2 is more stable than 7.8beta3 had problem with device freezes with 7.7, tried to use 7.8beta2 problem was resolved, now after updating to 7.8beta3 device again started to freeze or random reboot with kernel failure... tested on hex s and hap ac3, same behaviour. Hex S with no advanced fw, ha...

darkmanlv

already said about freezes of my hex s and hap ac3 with 7.7, now i found when it happen, if i start torrenting and doing more than 500mbit/s downloads... on hap ac3 there is not rules at all, it works like access point, hex s have default rules, nothing unreal... what i have done to the moment: low...

darkmanlv

already said about freezes of my hex s and hap ac3 with 7.7, now i found when it happen, if i start torrenting and doing more than 500mbit/s downloads... on hap ac3 there is not rules at all, it works like access point, hex s have default rules, nothing unreal... what i have done to the moment: lowe...

darkmanlv

after upgrade to 7.7 hap ac3 and hex s started to freeze randomly, only power reset helps

darkmanlv

Baltcom doesn`t give ipv6 to clients. Balticom also. I`m using sit tunnel to Hurricane Electric.

But found that LMT already started to give.
https://ipinfo.io/AS12847/2a03:ec00::/32

darkmanlv

Encountered with the same issue - some domains were super slow to open, and some are failed with timeout. Disabling a fasttrack connection didn't helped. Changing the MSS in Mangle rule solved the problem. /ip firewall mangle add action=change-mss chain=forward new-mss=1300 out-interface=wg-home pa...

darkmanlv

after upgrade from hap ac2 to hap ac3 speed of wifi is faster, but coverage is same, signal after 2 walls same as hap ac2... though would be better

darkmanlv

checked mine hap ac2, i have 256mb version, bought in Latvia, but it was in june 2018... uptime: 2w5d11h36m41s version: 6.46.2 (stable) build-time: Jan/14/2020 07:17:12 factory-software: 6.41.3 free-memory: 190.2MiB total-memory: 256.0MiB cpu: ARMv7 cpu-count: 4 cpu-frequency: 716MHz cpu-load: 2% fr...

darkmanlv

HAPac2 with higher power antennas (because now it have poor wifi performance, hap ac is better)

darkmanlv

You may try downgrade first to an earlier stable version (e.g. 6.43.7) which takes less space on the device and then upgrade to 6.45.7

thanks, hap lite upgraded to 6.45.7 first upgrading to 6.43.7 and then to newest one

darkmanlv

Hello everyone.

Device: RouterBOARD 941-2nD
Version installed: 6.45.6
Can`t upgrade to 6.45.7, not enough space to upgrade

how to upgrade?

darkmanlv

+1 DNSCrypt, when?

darkmanlv

found same today, version was 6.39 and also added this script with 95.154.216.164, changed pass, updated routerboard and routeros

darkmanlv

when?

darkmanlv

i have hap ac, 1gbit connection works perfectly

enable Fastpath, i had about 300mbit when it was disabled.

darkmanlv

problem not to throw it away, i want to understand what is the problem, because it is first device ever for me from mikrotik that is broken

ok, will do some soldering works and last try to repair it, then throw away

PS: i think my hap ac will not broke the same...

darkmanlv

Rma it simply

how to RMA if warranty is expired?

i`m in this situation first time with mikrotik, more than 200 devices, first time that kind of problem

darkmanlv

they answered and will not help me... :( how to fix it... it is working for some time and then froze.. maybe it is a problem with some capacitors? how to check them? i`m not a soldering guru :) answer from mikrotik support: -------------- Sorry, but also we can not help you. Also, we do not offer af...

darkmanlv

router dead again, at morning problem is back... now tried netinstall, 3 times, lost licenses, router works only for 5-30 min, then again show 2 light and thats all... doing reset or netinstall, again 5 - 30 min and halt :| doesn't know what to do more :( PS: maybe someone in Riga is interested to h...

darkmanlv

thanks, but netinstall not helped what i have tried is more than 100 power off/power on cycles, then it showed second led (ACT) and all lan off without cable. after powering it off and then on again was lan 2 led on. tried again many times also with/without reset button pressed. after 1 hour of tryi...

darkmanlv

Hello. I have some problem with hap lite. It is dead. Not starting. Only power led is on and one lan port always on, also without cable inserted. Tried to change in shop but warranty has already been expired by 3 months (only 1 year, bought like for a company, not private person). Have been sent to ...

darkmanlv

when will be fixed WIFI problem with old devices on Intel 2200BGN ? Still can`t connect to hAp Lite with old Toshiba laptop. Version prior 6.37 works perfect!

darkmanlv

problem with speed is fixed on hap ac

darkmanlv

No, please NOT!!! 6.36.4 is the only version which works with some older WIFI-Devices, like INTEL 2200. This version should be supported until the new wireless-package is fixed. i have the same problem with hap lite , old toshiba notebook with intel 2200bg doesn`t work if upgrade to 6.37.xx or 6.38...

darkmanlv

fastpath problem on 6.38 with hap ac , download speed dropped to 200 mbps from 500-800 mbps, cpu load is 100% http://www.speedtest.net/result/5956013817.png http://www.speedtest.net/result/5956001800.png on 6.37.3 all ok http://www.speedtest.net/result/5956026190.png http://www.speedtest.net/result/...

darkmanlv

Device: hAp lite Problem with old legacy wireless devices (for example Intel(R) PRO/Wireless 2200BG) still persist in 6.37.1 and 6.38rc7 ... can`t connect to network with WPA or WPA2 encryption. without - all fine. Always getting "extensive data loss". After downgrading to 6.34.6 - all fin...

darkmanlv

upgraded hAp Lite to new version 6.37 and old devices with 802.11g can`t connect... shows "excessive data loss", even deleted network and then connected with password again... still no result... configuration not changed, tried with all encryption algorithms WPA TKIP to WPA AES, and WPA2 T...

darkmanlv

Why so? I have the hAP ac at home as my access point. In our country, we get speeds 100-500Mbit at home, so even just for an AP you need power. I also have a few devices with no WiFi, so the extra ports help. yep, in Latvia at homes we get more than 100 mbit connections, so good quality gigabit rou...

darkmanlv

Where did you found it ? And what is the price without vat ?

router.lv 99 eur without vat

i called them, they said only receive routers next week...

darkmanlv

Hap ac is out

going to buy 1 today. After sample tests I will write about my opinion.

darkmanlv

still waiting from september, please tell ~ release date....

darkmanlv

waiting for it too.... living 800 meters from office of Mikrotik in Riga and still no hap ac

)

darkmanlv

hAP AC when??

waiting from August too, still no information on this... only have answer from mikrotik on twitter at 8 september:

"when we will have a date, we will immediately publish it. Currently device is in certification and will come soon"

darkmanlv

after upgrading to 6.32.3 speed of wan is degraded (also on 6.33 rc`s). now i got only ~ 270 MBit/s but with 6.32.2 i had ~330 MBit/s.

tried to downgrade to 6.32.2 and speed got back to 330 MBit/s

routerboard RB951G-2HnD

darkmanlv

MUM 2015 announcement, in Q3 there will be:

hAp
hAp ac lite (2.4 ghz 2 chain + 5 ghz 1 chain )
hAp ac (gigabit, 2.4 ghz high power 2 chain + 5 ghz high power 3 chain)

Will wait for it

Search found 45 matches