Hi ners,
Mikrotik guys checks the forum quite often but your request can get lost due to high number of posts.
I strongly suggest you to send an email to support@mikrotik.com with your issue so it can get the correct attention.
Search found 33 matches
- Sat May 02, 2015 12:13 am
- Forum: General
- Topic: Possible bug in RouterOS's SSH server
- Replies: 3
- Views: 1201
- Wed Apr 29, 2015 5:31 pm
- Forum: Forwarding Protocols
- Topic: Adding a AP repeater at clients location
- Replies: 3
- Views: 1230
Re: Adding a AP repeater at clients location
neoknet,
go to Routing --> OSPF, under the tab networks remove the network 192.168.200.0/24
If you don't have it please post the output of the command
and I will have a look.
go to Routing --> OSPF, under the tab networks remove the network 192.168.200.0/24
If you don't have it please post the output of the command
Code: Select all
/export hide-sensitive- Wed Apr 29, 2015 5:26 pm
- Forum: General
- Topic: How to block access to all websites and allow only few others and monitor bandwidth usage
- Replies: 3
- Views: 1924
Re: How to block access to all websites and allow only few others and monitor bandwidth usage
but how can i Mail this graphs on weekly basis or 10 days You need some scripting, have a look here: http://wiki.mikrotik.com/wiki/Scripts and here for an example http://wiki.mikrotik.com/wiki/Send_Backup_email BTW : I had used hotspot with Walled garden & bypass feature to allow users access s...
- Wed Apr 29, 2015 5:21 pm
- Forum: Beginner Basics
- Topic: Streaming data by wifi
- Replies: 25
- Views: 7098
Re: Streaming data by wifi
valdemirs, from the output you sent me your router is able to create a total throughput of ~ 80Mbit (53Mbit towards your laptop and 26Mbit from your laptop to your router) therefore the wireless configuration is ok. Now question is how the stb communicate with your PC? if it uses wireless you will h...
- Wed Apr 29, 2015 7:12 am
- Forum: General
- Topic: CCR Mikrotik Routing between two subnet in one interface
- Replies: 4
- Views: 1419
Re: CCR Mikrotik Routing between two subnet in one interface
Hi IntrusDave, Device is CCR ether2 10.9.8.254/24 and 10.9.9.254/24 Fileserver 10.9.8.100 Client1 10.9.8.2 Client2 10.9.9.2 Client 1 R/W speed to Fileserver is ~700-900Mbps Client 2 R/W speed to Fileserver is ~100-300Mbps Setting a master port won't help, as he is doing layer 3 routing and not layer...
- Wed Apr 29, 2015 1:10 am
- Forum: General
- Topic: CCR Mikrotik Routing between two subnet in one interface
- Replies: 4
- Views: 1419
Re: CCR Mikrotik Routing between two subnet in one interface
Hi Ucom, it looks like a 100% cpu utilization issue, you need to setup master port to enable the switch chip to do wire speed switching. To do that just select ether2 port as the master which will act as Layer 3 and set all the others (client 1, client2, fileserver) as slave then test the stuff agai...
- Wed Apr 29, 2015 12:59 am
- Forum: Wireless Networking
- Topic: 802.11AC Requires more rates than we support
- Replies: 1
- Views: 1474
Re: 802.11AC Requires more rates than we support
Hi BinaryPaws, if the client doesn't associate means that it cannot negotiate the same BASIC RATES, therefore check what you have checked in WinBox, ask your ISP what they have on the other side and match them. Once the AP will connect you can check SUPPORTED RATES to avoid rate flapping, anyway I r...
- Wed Apr 29, 2015 12:46 am
- Forum: General
- Topic: Internet Bandwidth lost behind CRS125-24G-1S-2HnD
- Replies: 3
- Views: 1310
Re: Internet Bandwidth lost behind CRS125-24G-1S-2HnD
Hi Thomas,
1st of all CRS125-24G-1S-2HnD is a switch and not a router
Beside this it looks like a 100% cpu utilization issue, how are the port configured? Are they bridged or are you using the master port (aka the switch chip)?
Also posting an /export hide-sensitive can help me with further debug.
1st of all CRS125-24G-1S-2HnD is a switch and not a router
Beside this it looks like a 100% cpu utilization issue, how are the port configured? Are they bridged or are you using the master port (aka the switch chip)?
Also posting an /export hide-sensitive can help me with further debug.
- Wed Apr 29, 2015 12:42 am
- Forum: General
- Topic: Recursive routing issue
- Replies: 2
- Views: 1308
Re: Recursive routing issue
Hi IbraR, recursive routing is used to check what's behind your first hop, not to jump it, therefore your packets are travelling from your LAN through the CISCO router and if it doesn't have the default route it will always drop the packet because it doesn't know where to forward it. IMHO the only w...
- Wed Apr 29, 2015 12:35 am
- Forum: Wireless Networking
- Topic: Wireless problem - Noobie, help please
- Replies: 4
- Views: 1206
Re: Wireless problem - Noobie, help please
Hi MadaraCZech, It's not clear if you tried to ping google from the pc or from the Mikrotik. if from the Mikrotik board it doesn't work then: #1: check if the default route (0.0.0.0/0) is present #2: ping 8.8.8.8 if works go to step #4 if not go to next step #3: Check nat configuration on the Mikrot...
- Wed Apr 29, 2015 12:23 am
- Forum: The User Manager
- Topic: PPPoE Client without authentication
- Replies: 2
- Views: 2900
Re: PPPoE Client without authentication
Hi EzeCba, pppoe is by itself an authentication protocol therefore having it without authentication is a non-sense. Anyway I have couple of ideas which can fulfil your requirements: #1: have a device (which can be a RouterBOARD or a PC) in your control behind the CPE which is not in your control ope...
- Wed Apr 29, 2015 12:15 am
- Forum: General
- Topic: SXT Lite5 does not boot
- Replies: 2
- Views: 2084
Re: SXT Lite5 does not boot
Hi Yiannis,
hard to tell, I guess an hardware issue.
Try to open a support ticket and see what they will tell you.
hard to tell, I guess an hardware issue.
Try to open a support ticket and see what they will tell you.
- Tue Apr 28, 2015 10:59 pm
- Forum: The User Manager
- Topic: Unable to extract user manager package version 6.12
- Replies: 1
- Views: 1798
Re: Unable to extract user manager package version 6.12
Hi usmanahmed,
usermanager is not installed by default, you need to donwload the "all packages" zip file for tile architecture, extract it and move the user-manager package into your router, after reboot you will find the user-manager installed.
usermanager is not installed by default, you need to donwload the "all packages" zip file for tile architecture, extract it and move the user-manager package into your router, after reboot you will find the user-manager installed.
- Tue Apr 28, 2015 10:51 pm
- Forum: Forwarding Protocols
- Topic: Adding a AP repeater at clients location
- Replies: 3
- Views: 1230
Re: Adding a AP repeater at clients location
Hi neoknet,
you have 2 solutions here:
#1: use OSPF route filters to filter outbound route advertisments
#2: remove the network 192.168.200.0/24 from the advertised networks in the OSPF
I would personally go for the solution #2 which is the easiest and cleanest way.
you have 2 solutions here:
#1: use OSPF route filters to filter outbound route advertisments
#2: remove the network 192.168.200.0/24 from the advertised networks in the OSPF
I would personally go for the solution #2 which is the easiest and cleanest way.
- Tue Apr 28, 2015 9:13 pm
- Forum: General
- Topic: Web Proxy 6.28 ROS @ RB751U-2HnD
- Replies: 3
- Views: 1516
Re: Web Proxy 6.28 ROS @ RB751U-2HnD
vpritiskovic, I have searched and found the reason for this behaviour! While RB751G-2HnD has 64MB of RAM the RB751U-2HnD has only 32MB of RAM http://routerboard.com/RB751U-2HnD And of course the ROS feature: What's new in 6.23 (2014-Dec-04 14:46): *) pptp - fixed problem where tunnel stopped transmi...
- Tue Apr 28, 2015 7:44 pm
- Forum: General
- Topic: Web Proxy 6.28 ROS @ RB751U-2HnD
- Replies: 3
- Views: 1516
Re: Web Proxy 6.28 ROS @ RB751U-2HnD
Hi vpritiskovic,
It's almost impossible that same configuration applied on 2 different boxes bring to 2 different results.
Can you please paste your script? Perhaps you have some nasty error there that you didn't spot.
It's almost impossible that same configuration applied on 2 different boxes bring to 2 different results.
Can you please paste your script? Perhaps you have some nasty error there that you didn't spot.
- Tue Apr 28, 2015 7:41 pm
- Forum: General
- Topic: lock all traffice allow 2 websites :)
- Replies: 1
- Views: 758
Re: lock all traffice allow 2 websites :)
Hi qudama,
have a look here http://forum.mikrotik.com/viewtopic.php?f=2&t=96307 as somebody as really similar issue like you.
have a look here http://forum.mikrotik.com/viewtopic.php?f=2&t=96307 as somebody as really similar issue like you.
- Tue Apr 28, 2015 7:39 pm
- Forum: General
- Topic: How to block access to all websites and allow only few others and monitor bandwidth usage
- Replies: 3
- Views: 1924
Re: How to block access to all websites and allow only few others and monitor bandwidth usage
Hi shiko0o, about your questions: - I want to give access to the specific sites that related to the business. and block access to other websites. Web proxy + access lists are what you are seeking for, have a look here http://wiki.mikrotik.com/wiki/Manual:IP/Proxy - Wants to get reports for bandwidth...
- Tue Apr 28, 2015 7:01 pm
- Forum: Beginner Basics
- Topic: Streaming data by wifi
- Replies: 25
- Views: 7098
Re: Streaming data by wifi
valdemirs, Interferences can be a problem but if signal is very low (below -90dbm) it's not a big deal, if it's strong (above -90dbm) then you need to avoid at least 3 frequencies around it. If we will not able to find any suitable channel then we need to change the band (e.g. move to 5Ghz), change ...
- Tue Apr 28, 2015 4:14 pm
- Forum: Beginner Basics
- Topic: Streaming data by wifi
- Replies: 25
- Views: 7098
Re: Streaming data by wifi
valdemirs,
that's really strange I have AP installations which support around 100mbit over Wi-fi.
Did you try changing frequency?
Try to download Btest from Mikrotik download page and run a TCP test to ensure that issue is outside our wireless config.
that's really strange I have AP installations which support around 100mbit over Wi-fi.
Did you try changing frequency?
Try to download Btest from Mikrotik download page and run a TCP test to ensure that issue is outside our wireless config.
- Mon Apr 27, 2015 10:43 pm
- Forum: Beginner Basics
- Topic: Need help with routing and SIP
- Replies: 4
- Views: 1780
Re: Need help with routing and SIP
Hi springer1981, to help you I need: #1: Topology drawing with all informations (e.g. where is SIP server) #2: Connections and rules implemented on the SonicWall #3: configuration you have done on 1st site (Go to WinBox, hit "New Terminal", run "/export hide-sensitive" and post t...
- Mon Apr 27, 2015 10:30 pm
- Forum: Scripting
- Topic: how to get current active ip&mac list?
- Replies: 6
- Views: 1581
Re: how to get current active ip&mac list?
Hi pkptzx2,
have a look at
or
depending on what you mean with "active ip & mac"
have a look at
Code: Select all
/ip arp print
Code: Select all
/ip dhcp-server lease print
- Mon Apr 27, 2015 10:23 pm
- Forum: General
- Topic: Help Guides
- Replies: 1
- Views: 573
Re: Help Guides
Hi mattg87, seems that http://wiki.mikrotik.com/wiki/Main_Page is what you are seeking for. Welcome to the MikroTik Wiki! This is a place where users of MikroTik solutions share information, examples, howtos and ideas with each other. This resource consists of both User Maintained How-To articles, a...
- Mon Apr 27, 2015 10:21 pm
- Forum: RouterBOARD hardware
- Topic: Routerboard Hardware: For NTC Type Approval
- Replies: 1
- Views: 1099
Re: Routerboard Hardware: For NTC Type Approval
Hi Sphynxtrix,
have a look here http://i.mt.lv/routerboard/files/276UC1 ... 143519.pdf if this can help you otherwise is better to send a request to support@mikrotik.com with your specific question.
have a look here http://i.mt.lv/routerboard/files/276UC1 ... 143519.pdf if this can help you otherwise is better to send a request to support@mikrotik.com with your specific question.
- Mon Apr 27, 2015 10:17 pm
- Forum: General
- Topic: "Authorization: failure" Error when upload
- Replies: 1
- Views: 1139
Re: "Authorization: failure" Error when upload
Hi David1234,
if it's a new router I suggest you an RMA http://rma.mikrotik.com/ or try a re-flash with netinstall.
if it's a new router I suggest you an RMA http://rma.mikrotik.com/ or try a re-flash with netinstall.
- Mon Apr 27, 2015 10:14 pm
- Forum: Beginner Basics
- Topic: Problem with VPN after restoring from a backup. V6.28
- Replies: 2
- Views: 889
Re: Problem with VPN after restoring from a backup. V6.28
Hi cmstechnical, looks like a certificate issue. Check if your certificates are listed under System --> Certificates, if yes then remove them and re-import from the files, if not then just import them and submit a support ticket to support@mikrotik.com so they can have a look why certificates are no...
- Mon Apr 27, 2015 10:08 pm
- Forum: Beginner Basics
- Topic: Firewall rules for LAN PCs connected to external switch
- Replies: 2
- Views: 1205
Re: Firewall rules for LAN PCs connected to external switch
Hi AlAraf, it really depends on external cisco switch model and RouterBOARD model, if the switch supports VLAN you can group PCs together, assign a VLAN and trunk the traffic to the RouterBOARD. The RouterBOARD will then have vlan interfaces where you can apply firewall rules. Type of RouterBOARD wi...
- Mon Apr 27, 2015 8:49 pm
- Forum: Beginner Basics
- Topic: Streaming data by wifi
- Replies: 25
- Views: 7098
Re: Streaming data by wifi
Hi valdemirs,
Is that simple queue targeting your set top box?
If yes that would be the issue since the default queue configuration is not enough for media streaming, therefore please try to disable it and let me know
Is that simple queue targeting your set top box?
If yes that would be the issue since the default queue configuration is not enough for media streaming, therefore please try to disable it and let me know
- Sat Apr 25, 2015 6:02 pm
- Forum: Beginner Basics
- Topic: Do I need RADIUS server ?
- Replies: 3
- Views: 1842
Re: Do I need RADIUS server ?
Hi Snade, Radius is a standard protocol which provides AAA (Authentication, Authorization and Accounting) functionalities and can "talk" to your Radius clients (e.g. AceessPoints), basically you can decide who will access, what this guy can do, when this guy had access to your system and i...
- Sat Apr 25, 2015 5:50 pm
- Forum: Beginner Basics
- Topic: router configuration help
- Replies: 2
- Views: 840
Re: router configuration help
Hi dpgeiger, you need to use mangling http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/Mangle , basically you need to: #1: Match each source IP and mark each connection #2: Match the connection-mark and apply a routing-mark #3: Create a default static route matching each routing-mark In this way you...
- Sat Apr 25, 2015 5:37 pm
- Forum: Beginner Basics
- Topic: remote log off mikrotik
- Replies: 2
- Views: 1645
Re: remote log off mikrotik
Hi dancho,
as far as I know this functionality is not implemented in RouterOS yet.
Anyway you can do a feature request here: http://forum.mikrotik.com/viewforum.php?f=19 and Mikrotik support team will let you know if they will implement it or not.
as far as I know this functionality is not implemented in RouterOS yet.
Anyway you can do a feature request here: http://forum.mikrotik.com/viewforum.php?f=19 and Mikrotik support team will let you know if they will implement it or not.
- Sat Apr 25, 2015 5:30 pm
- Forum: Beginner Basics
- Topic: Firewall rule not stopping tcp port 63000
- Replies: 5
- Views: 1883
Re: Firewall rule not stopping tcp port 63000
Hi,
can you post the output of
command?
Seems to me the an issue with firewall rule definition but I cannot judge it from the information you provided.
can you post the output of
Code: Select all
/ip firewall export hide-sensitiveSeems to me the an issue with firewall rule definition but I cannot judge it from the information you provided.
- Sat Apr 25, 2015 5:25 pm
- Forum: Beginner Basics
- Topic: Streaming data by wifi
- Replies: 25
- Views: 7098
Re: Streaming data by wifi
Hi, seems that you have issues with your Wi-Fi settings, but it's quite hard to help you with data you gave us. Can you connect using winbox (or ssh), run following commands in "new terminal" and paste results here? This will print all your configuration hiding sensitive data (like passwor...