MikroTik

webbsolution

I own: RB4011iGS+5HACQ2HnD (primary router in the wiring closet with both 2.4 and 5 Ghz wifi services) RB2011UAS-2hND - Used as a bridge upstairs with a CAP2nd connected via the POE port. THis was all working flawlessly for years and then my wife power cycled the house and none of my passwords were ...

webbsolution

I have been trying to add a cap2N to my network - The last time I did this on my RB2011 it was easy and fast - I followed this tutorial - I thought it was really an excellent tutorial to be honest - https://www.youtube.com/watch?v=OGFKfyzHnsM Then I purchased the RB4011 with both 2.4 and 5Ghz AP's -...

webbsolution

Thank you for your continued patience - sorry for being an idiot but im not understanding the request to post the code - i did a drawing of the LAN, the hard wired components and the devices that require DHCP/DNS and the external services - see attachment - maybe this will help identify the simple s...

webbsolution

(do you want access to all vlans from your PC or just internet)? - Yes eventually - right now I dont have any Vlans but I will deploy that at some point in the near future. What is sans? is it a managed switch?? SANS = Storage area Network - really just two storage devices - Synology Boxes - The Net...

webbsolution

I am trying to trying to make your changes.... but things are not going to plan here ... you will note that at the start of this post while following the tutorial that I mentioned the lack of an option to use a master port to switch all the ports to ? Maybe this was my mistake ? I can see a check bo...

webbsolution

I was originally looking for a different rev of firmware with a more complete default build - this one is obviously broken, but I could not find one that winbox allowed me to upgrade to...so I removed the default config and started from scratch - Are you suggesting that I load - the MMIPS beta firmw...

webbsolution

thanks for the feedback - ITs still a work in progress. 1) added - 2) noted - its a small network and ill tighten this up later - 3) The WAN port is #1 which the ISP Ethernet cable is plugged into - 4) Rule added - I will be forwarding ports once I get the other issues resolved. I can also see I hav...

webbsolution

i dont have a lot of faith in this default config - so im following this tutorial https://www.youtube.com/watch?v=ulDefmf1ces but its a little outdated. At 8:54 the video tutorial is suggesting that I set the master port slave off of interface # 2 but the field he is using (master port) does not app...

webbsolution

yea something is odd with this... I cant upload any of the stable or LTR releases to this router either...even though it lists 4.xxx routers...its says not permitted. but maybe now after a factor hard reset it might work - anyways here is the output so go to system ----reset configuration ? - Not pe...

webbsolution

I have reset the config three times and this same issue persists so it would appear I need to load another rev on this router then? I have a perfectly configured rb2011 but im pretty sure that config wont work on this router with the extra radio and different processor ? Also this...... It seems tha...

webbsolution

thansk for the note on the temp password exposure - no its not the real PW

I am just setting this router up with a secondary internet line and nothing is attached to it at the moment aside from a Linux Live computer when it goes live the password gets changed.

webbsolution

that was the default config -

is there a better default config available for this router?

webbsolution

I picked up a new rb4011igs5hacq2hnd-in and have been trying to get it working - The lan ports all route fine to the internet but the wireless Ap appears to have some kind of DHCP failure ( I see 169.x on the wifi ipconfig output. config output is: # dec/12/2018 19:35:08 by RouterOS 6.43.4 # softwar...

webbsolution

my desktop is connected to eth3. I was using the DNS feature within Routerboard. I tried 8.8.8.8/8.8.4.4 and also the primary and secondary for my ISP and then all 4. These all work without issue when the MTU is at 1500 but when I downgrade to 1491 - I get random DNS weirdness. I also tried to creat...

webbsolution

In an attempt to see if a game server was having a hard time with the MTU settings on the default 6.41 rev of ROuterboard I reduced one interface (eth3) to 1491. Once that was done every device on the lan was experiencing random DNS issues. Some SSL sites would not resolve and others were so slow th...

webbsolution

Resolved - the root cause was not the Cap2n but rather a dead POE port - the port was supplying power but no ethernet... :( I am back on line with the POE injector and another port on my RB2011. ITs not as elegant as a single POE line but its functioning. Note that I used a fairly long cable on this...

webbsolution

I originally setup my Capsman cap2n using this URL - tutorial. https://www.youtube.com/watch?v=OGFKfyzHnsM I found it easy to setup and it has been flawless for months. Today I had some power issues and noticed the wireless devices were all offline. In the past if I rebooted a device by unplugging t...

webbsolution

do you have to use the same fix as I did to resolve it ?

webbsolution

looks like my only issue with this after a few days of testing is that the remote cap2n loses connection to Capsman after it reboots. I have to go into Wirelss/Cap/ disable (apply) and then enable to get it back online.

webbsolution

I have recently setup capsman. It seems to work perfectly until I reboot the cap and then the cap is never detected again. I can resolve this by logging into the cap and disabling the Capsman feature and then renabling it. Then the cap is seen by Capsman and I can log on fine. However, we get some o...

webbsolution

I spent the better part of the day working on this while my isp was flapping my connection which meant a lot of trips uo and down the stairs as my cable model is in the wiring closet :) . I changed my tutorial to this one as it seemed to cover the basics - https://www.youtube.com/watch?v=OGFKfyzHnsM...

webbsolution

thanks for the fast reply! - OK so it looks like I did something wrong in my setup and ill restore and try a different tutorial. All I really want is two AP's one upstairs (a cap2n) and one downstairs - the RB2011 - if you have a reference tutorial I would be interested in checking it out.

webbsolution

When you deploy Capsman in say an RB2011 + a cap2n is the main Rb2011 wireles SSID also hidden? I kind of thought that I would see the main Wifi AP SSID and then the CAp2n via Capsman - is that incorrect?

webbsolution

I am reading through tutorials on deploying capsman and i see references to Wireless-cm2 package but I cant see it anywhere in the download packages (current - all packages) where is it ?

webbsolution

I ordered a Cap2n to extend my wireless network with central management via Capsman. I see the notes referring to incompatibility between v1 and V2 devices -I also see reference from a few years back that Capsmanv2 is ready for testing...and the specific package should be available in the release ca...

webbsolution

Yes when I turn on the web server -80 passes through and CANyouSeeme validates it - port 5000 is working because ...it should - I had the wrong Ip in mind when I said that was a phantom IP - 139 is indeed a synology NAS - itis online which is why the rule works. 3074 and the other ranges referenced ...

webbsolution

but this "add action=dst-nat chain=dstnat dst-port=80 in-interface=ether1-gateway protocol=tcp to-addresses=192.168.88.125 to-ports=80" Does not work - 192.168.88.125 is a real address - but I cant check for an open port on 80 wiht this rule ... This "add action=dst-nat chain=dstnat d...

webbsolution

Thank you for your help - [admin@MikroTik] > /ip firewall export hide-sensitive # nov/26/2017 11:52:04 by RouterOS 6.40.4 # software id = 45FL-UCT7 # # model = 2011UiAS-2HnD # serial number = 5E6F05A0B63C /ip firewall filter add action=accept chain=input comment="default configuration" pro...

webbsolution

Sorry in advance for the neophyte nature of my questions - Internal IP of my desktop in question is 192.168.88.12X (windows 10 - Fiewall totally disabled (Domain - everything) Cable modem FW also is off) I cant seem to forward ports. I tried the following resources http://www.icafemenu.com/how-to-po...

webbsolution

or get the hardened gateway up and let it communicate to the back end servers...then forward everything to that IP...done ??

webbsolution

im not sure how that will work - here is an example - the web interface uses 80 for authentication and 443 when i stick a cert on it...BUT I also have other members internally that use 80 and need to be hit from the wan on that port. For example - port 80 is XXX.XXX.XXX.139 and 14 Port 1494 and 2598...

webbsolution

I have a lab that requires external access via ports 1494,2598,2512,44,80 - the internal members that leverage these ports are on xxx.xxx.xxx.11-19 i followed the tutorials for forwarding a single port (IE 3389) to a single internal port and it works (yay!) but im not sure how to generally "acc...

webbsolution

Is it possible to further restrict incoming VPN users to MAC ACL lists in addition to their USER ID and PW ??

webbsolution

Followed this thread for that detail and essentially recreated all the steps -http://www.urosvovk.com/step-by-step-how-to-configure-a-pptp-vpn-server-on-mikrotik-routeros/ Still would not connect - then I went to quick set and saw the VPN check markand checked it and set a PW - and I can connect ext...

webbsolution

OK eeee - tried this one - https://www.youtube.com/watch?v=OBlUaZw9uNU looks like its from an earlier version - based on SHa VS sha1 etc - I followed it and still cant connect from my win8 laptop (tethered externally) I can pin my wan IP from my ISP but cant connect using Lt2P - is there a better li...

webbsolution

I would like to setup a VPN connection so that when I am out of the office I can remote into my lab - I have been successful in setting up a local VPN connection (LAN-LAN) using this how to : https://www.youtube.com/watch?v=YRByWKO0kM4 - In that scenario this was good for a bsic tutorial on profiles...

webbsolution

RB2011 is in transit (this unit has wifi on board) I am hoping to obtain the following configuration on this new solution 2 Vlans or network segments to achieve: Vlan -1 with DHCP 192.168.10.5/15 routed to the internet Vlan -2 (Xenserver host Vlan) - no DHCP scope but address space is 192.168.1.5/10...

Search found 37 matches

recovering my setup - need some help

Resolved - CApsman -no supported channel

Re: rb4011 - default config has broken DHCP

Re: rb4011 - default config has broken DHCP

Re: rb4011 - default config has broken DHCP

Re: rb4011 - default config has broken DHCP

Re: rb4011 - default config has broken DHCP

Re: rb4011 - default config has broken DHCP

Re: rb4011 - default config has broken DHCP

Re: rb4011 - default config has broken DHCP

Re: rb4011 - default config has broken DHCP

Re: rb4011 - default config has broken DHCP

rb4011 - default config has broken DHCP

Re: BIUG ??????????? Set eth3 MTU to 1491 = Random DNS failures

BUG ??????????? Set eth3 MTU to 1491 = Random DNS failures

Re: Canonly log onto the cap2n on a 192.168.0.X subnet

Canonly log onto the cap2n on a 192.168.0.X subnet

Re: Capsman - what SSID's should I see ?

Re: Capsman - what SSID's should I see ?

Capsman - Cap gets lost after reboot

Re: Capsman - what SSID's should I see ?

Re: Capsman - what SSID's should I see ?

Capsman - what SSID's should I see ?

cant find Wireless-cm2 package ?? [SOLVED]

capsman V2 package - cant find it to update my routerboard and Cap [SOLVED]

Re: port forwarding confusion

Re: port forwarding confusion

Re: port forwarding confusion

port forwarding confusion

Re: genral port "acceptance VS sinple Ip forwarding question

Re: genral port "acceptance VS sinple Ip forwarding question

genral port "acceptance VS sinple Ip forwarding question

VPN ACL restriction

Re: VPN Newbie question

Re: VPN Newbie question

VPN Newbie question

Router is in transit - learning ahead of delivery