MikroTik

markrudling

Hi guys I have an issue with my one Internet Provider. Internet traffic is passed through web proxy so the web proxy IP is passed to dyndns when trying get ip address. For this reason, i need to get the ip address of the active interface and send that to dyndns. I have re-worked the script below and...

markrudling

Great reply! thank you

If only i knew this before.

I have sent a mail to support, hopefully they will be able issue me with the key before my time expires.

Regards
Mark

markrudling

Hi guys Today i had issues after trying to upgrade my RB133c to 5.11 from 5.7 The upgrade failed and i had to format nad, reinstall firmware and OS. Board is back up and running, but my license has gone. How can i get it back. trying to update license key returns: Failed: Invalid old software ID! Th...

markrudling

Thank you for the help Currently im dialing the PPPoe Connections on the MK that is connected wirelessly to the Modem. Connected to the ethernet port of that MK, i will connect a second MK. I would like that new MK to take over the dialing of the PPPoE. So i need to bridge the wireless interface and...

markrudling

Hi there I currently have a MT connecting to a wireless ADSL modem. The modem is in bridge mode and the MT dials the PPPoE connections to the internet. I have added a RB750 to the setup and will be doing some LB between two ADSL lines. I would like to turn the current MT that connects wirelessly to ...

markrudling

Anyone?

Surly this is not such a difficult thing to achive?

markrudling

Hi there I currently have a MT connecting to a wireless ADSL modem. The modem is in bridge mode and the MT dials the PPPoE connections to the internet. I have added a RB750 to the setup and will be doing some LB between two ADSL lines. I would like to turn the current MT that connects wirelessly to ...

markrudling

Hi guys I’m assisting my brother upgrade his current WISP setup. They have a number of subscribers across multiple AP’s. Some AP’s are used as connection points for additional AP’s. At the moment, each AP interface has its own IP range. Each client is manually assigned an IP address and is routed th...

markrudling

As I understand it, when playing a lan game, the game broadcasts on 255.255.255.0, however the vpn puts you on a 255.255.255.255 network, hence the game cannot recive the broadcast. I belive the bridge will foward on these broadcast packets. How would i setup a bridge? I assume i will need to bridge...

markrudling

Sorry, very late reply.

Im using the mikrotik to dial a PPPOE connection, where i get my internet from.

How do i create a bridge between the LAN interface, and the VPN connection?

Havent bridged before, so if you could explain please.

markrudling

Hi guys Looking for some advice from a Mikrotik wizard. I am trying to setup a VPN that will allow me to play games with a few of my mates, but using the games LAN functionality. I have setup the VPN and they can dial in. Once connected, they can ping my computer, access shares etc. However, when se...

markrudling

Thanks changeip

That is working great, i have not got 2 masquerade rules, one for everything, and the other for the specific ip.

Thanks
Mark

markrudling

Hey Guys I need some advise please. My internet connections are via PPPoE. I have a masqurede rule. I have dest-nat rules to allow incoming connections to my services. One service however displays connected clients, and it show all clients coming from the same ip (The Mikrotik). I need these ip addr...

markrudling

Hi So im finally making progress. My MT is currently dialing 2x PPPoe Connections. I have setup route marks so my pc goes via a specific pppoe connection, and i have a router that is connected to the other. My problem is this, my router has dyndns setup on it, i need it to translate the assigned ppp...

markrudling

Hi I have got the changeip script working, so all good. however i now need to keep my dyndns name, as to many clients are already configured for that name. Im not running http services, so i need all ports to be directly redirected. Any ideas? Also, is it possible to mod the script to work with a sp...

markrudling

Are you talking about the wireless interface on the MT or the wireless AP settings? I presume the AP is all setup correctly, as i am able to dialup with the PC's but not via the MT. Whowever I am going to attempt to get the MT to dial the connections, and then route the traffic accordingly. Thanks f...

markrudling

anyone please, I have tried bridging the 2 interfaces, no luck tho

markrudling

Hi Guys I have searched everywhere, but cant find any help. I need 2 computers to each dial there own pppoe connection. I connect wirelessly to a adsl router. I want to setup my mikrotik to connect to this ap, and allow the pc's on the lan ports to be able to dial up a connection, via the mikrotik. ...

markrudling

Hello everyone. Please can you help me, this is going to kill me. I need to have 2 services running via one external IP, each service using different ports, on different devices. Some udp, some tcp. How would this be done? Pls, i know this might seem simple, but i have to get this working. Everythin...

markrudling

we are using simple queues to limit speed, but this user has bought extra bandwith from us, so when he uses, it takes up to much over-all bandwith. I can see by torching his ip, that he is downloading from rapidshare, with 8 sessions open. If i can limit that to only 2, things will be better

markrudling

Hi.

We have one client who keeps using download managers that overload our limited bandwith. What is the quick and easy way to limit his ip address of 192.168.45.13 to only 2 concurrent connections?

Thanks in advance.

markrudling

Thanks jorj

If i disable the masqurade, will i have to enable anything else for trafic to flow? (Wireless network)

markrudling

Hi We have one central rb with other rb's connecting down the line. we also have clients connecting to the main rb. We have setup simple queues to limit users and give full speed to the "feeds" to other AP's. Some of our clients use to much bandwith and we would like to lower there priorti...

markrudling

Would it be rude to ask for an example?

Thanks

markrudling

Hi guys. I know this is a simple one but it keeps getting me confused. First this is what i have setup: 5 static ip's, natted to 5 internal ip's. 2 nat rules exist for each ip, one scr and one dst. Nothing else is customised, ie all port and services are natted, wide open. Masqurade rule for all oth...

markrudling

so there is no other way? its not a issue of weak sig, just a badly made bridge with little settings...

markrudling

Good idea!

How do you set the data rates of the virtual ap, with winbox there is limited options.

Thanks

markrudling

Thanks for that, the problem is that we have many clents connecting to the same AP, some working great at 48meg, including feeds to other distrubition points. so dont want to force them to a lower speed.

I just wanted to force just the one client bridge to a certain speed.

markrudling

Hi. Im using a Senao b/g client adaptor to connect to an routerboard AP. I would like to know is it possible to configure the AP to only allow only specfied datarates? The problem is that the client adaptor keeps trying the fastest one then stumbles, and drops the connection speed. I have found with...

markrudling

Blush

Sorry, i have made the mistake, when adding the ip address to the list, by default they are dissabled. Enabling them cured fault.

Thanks again to everyone giving there time to help me.

Issue completely resolved.

markrudling

Nope. sorry this acutally did not work. I recived a call this morning saying there is no internet to clients... after checking the masquerade rule i had left an ip in the wrong place, rendering the masquerade rule useless, but i still had connectivity as i have nated ip. After checking recomended se...

markrudling

Thank you very much, The list trick is working.

Is this the correct way or is it a clever work-around.

Nether the less it worked great for me.
Thank you.

markrudling

Thanks for the help, i aranged as you recomended and ensured masquerade rule is last on the list, still the same. How would you exclude real ip users from the masquerade? Infact i have done this with one client by adding an ! next to his ip in the masquerade rule, this then works for his ip, but you...

markrudling

Hi Im having issues with something very simple here. all network traffic is masqueraded. However some clients need external ips. I have done this this scr and dst nat rules. i can ping and access my pc externaly. now for the strange bit. Some services dont work like echolink. the only way i can get ...

markrudling

Hi, Could someone help on the following I would like to share bandwith evenly between users. I need 2 groups, Clients and Admin. Clients will be limited to 192k down and 64k up. Admin must be unlimited, but only load the free bandwith. I have setup simple queues but they dont work well. The speed li...

markrudling

Hi, If you running more than one mikrotik board, can you manage all bandwith rules from the mikrotik connected directly to the internet? Ie. All managemnet will be done from main board, other boards will be used just to direct trafic to the main board? Also, im using clarkconnect as a gateway/mail s...

markrudling

As easy as that.

Many Thanks

markrudling

Hi, we have 3 512 boards, connected wirelessly. If im connected to board A, i can connect to any computer connected also to board A reguardless of the radio its connected to. How do i connect to a computer connected to board B? My IP's are setup like this Board A radio ip 192.168.1.1 Second radio ip...

markrudling

sorry for the late reply If i connect i computer behind the clarkconnect gateway, and assign it with an ip supplied by my isp, that ip can be pinged via the internet. so i assume that the gateway is alowing passthough of those ips. How do i setup my lan port to be "public" or dont i need t...

markrudling

Im using pppoe for internet, after a random time, i loose internet. I cant ping my gateway but can ping radio im connected to. The pppoe connection stays connected, only cant get past the first radio. Strange thing is its only on 2 computers, connected to eachother via switch, then onto senao radio....

markrudling

Hi guys, I Hope someone can help. Setup is like this: Adsl-=-Cisco Router-=-Clarkconnect gateway-=-Mikrotik. Our ISP supplied us with 4 static ip's. One is used for the clarkconnect gateway, that is aslo our web,mail server. Now i need one of our computers on the network, connected via pppoe to the ...

markrudling

Right, After some fiddling this weekend, i have some new results. I was advised by the salesman not to even think of trying 802.11g on a long range link. But after a lot a tweaking and software upgrades, i only managed .9mb. So i changed over to 802.11g with some incouring results. After tweaking da...

markrudling

Thanks cmit On the AP Side: "[mark@Uplands] > /interface wireless registration-table print stats 0 interface=AP Uplands to TTP radio-name="Bridge To Upland" mac-address=00:02:6F:42:E8:39 ap=no wds=no rx-rate=2Mbps tx-rate=2Mbps packets=0,15 bytes=0,1015 frames=0,7 frame-bytes=0,1021 h...

markrudling

Sorry...

When typing "interface wireless registration print statistics<CR>" i get "[mark@TTP HI-SITE] > interface wireless registration print statistics<CR>
no such argument (statistics<CR>)"

Is there something i need to setup?

Thanks again

markrudling

we want to use 5ghz at a later stage, but we just bought 2.4ghz antenna's and now our budget is not looking very good. so we have to make 2.4 work for now. On the station side we pick up a few other wireless networks. The station is situated on a fire-lookout, in the country so local interferance in...

markrudling

Please advise on how to print the stats. Exact command if possible..

Sorry, Mikrotik virgin...

Thanks

markrudling

Thanks guys, I will upgrade tonight after work. Currently im brushing up on some intresting profanites to throw at the board! What the difference between a full install and an upgrade? Im guessing an upgrade will just update, keeping current settings while a full install will bring it back to factor...

markrudling

Im running 2.9.27.

Should i upgrade anyway? Wrong place to ask it, but sould i just download the upgrade from http://www.mikrotik.com and ftp all the files across?

Will my settings stay the same, i dont feel like the drive in the bush to setup the board...

Thanks.

markrudling

Here are my current stats From the AP from the status menu: Overall TX CCQ: 25% Noise Floor: -98dbm From the Station from the status menu: Tx/Rx Signal Strength: -69/-68 Noise Floor: -99 Signal To Noise: 33 Tx/Rx CCQ: 33/30% Overall Tx CCQ 0% Im sure these are totaly crapy? Is horizontal or vertical...

markrudling

Hi. This is our setup: One side is a 532 with one senao NMP-8602 with eth01 connected to pc. One 1.3m dish (not sure of gain) with about 2m LMR400. Other side is a 532 with 3 senao NM-8602's, one set to bridge other 2 AP's. One 24db grid with .5m LMR400, then 2 horzontal sectors on the AP's. We runn...

markrudling

Hi I’m a newbie to the routeros system and would love some help. I’m setting up a Wireless Internet Service. I’m running a Routerboard 532 and would like to know if the following setup will be ok. My customers will connect via PPPOE and I will limit there bandwith to 192kbs. What ever bandwidth is l...

Search found 51 matches