MikroTik

RyperX

Thanks, this was strange.
I couldnt access SFTP in the first place, after router reboot this was possible.

Much more convenient then SMB.

RyperX

Thanks for the update!
I tested it now with SMB and it did work. (except SMB is killing the router with wrong settings

viewtopic.php?p=1092083#p1092083)

RyperX

Is there any news on this problem? I experienced this today. I am on 7.15.3 and tried for the first time an SMB share. (encryption enabled and share is on an SSD/USB) After accessing the share from my client the switch completely crashes. Still necessary workaround with comment or no encryption? Edi...

RyperX

Hey, i looked for this when container was released and also found some topics https://forum.mikrotik.com/viewtopic.php?t=201961 https://forum.mikrotik.com/viewtopic.php?t=189481 Is there still no way to edit a file in a container mount or access these files? As long the container itself has a backup...

RyperX

Hi guys,
i am new to thedude and i have 2 Mikrotik Devices connected, the second one runs on a VPN connection.
I wanted to ask, what protocol would have less performance impact.
The SNMP Protocols (and maybe the difference between them) vs Routers OS.

Any documentation or recommendation on that?

RyperX

Thanks for you suggestion, still i have no glue whats going wrong with my discovery. I have an Home Use setup with about 60 devices with mostly normal clients (smartphones, computers, notebooks, smart home devices) and the dude server is installed on a 5009. I have some networks and vlans installed ...

RyperX

Have the same problem, it is working some time but i think after an reboot the problems always starts

RyperX

Hi, i am also analyzing this problem for me and such a feature would be great. For testing, i have 2 containers which are using about 100MB on my Server. I installed them now on my RB5009 and before the start i have about 800MB free, after starting the containers (exact same config as on server) the...

RyperX

I had the same problem over months and the end i had to reformat my USB Drive.
I switched now to an USB-SSD-Drive and everything works flawless.
Maybe worth a try for you.

RyperX

To my knowledge (but I don't know that much ;) ) there are no documented cases of a completely bricked RB5009. So you may want to dust off those netinstall skills. It has to work. My preference is going via Linux. Others prefer Windows. For both make sure to disable ALL network interfaces except fo...

RyperX

Now 18 days after release i thought, it is safe to flash my rb5009...
It is bricked now... only eth1 flashes for a seconds and nothing more.

Couldnt achieve a netinstall ...

RyperX

RB5009 some issues I picked up after upgrading from v7.2rc5 -> v7.2rc6 (happened on a few of our devices) - info logging to memory topic disappeared after upgrade -> needed to recreate it - DHCP Server static leases - some of them disappeared/didn't come across with the upgrade -> needed to recreat...

RyperX

Upgraded rb2011 / rb5011 from 7.1.1 to 7.1.2

Lost on both devices part from my config (firewall rules for example), restored config backup and worked again.
DHCP on rb5011 worked only after 2 reboots.

RyperX

For information, it was enough to disable the bridge and all other Interfaces.
The Update ran fine and after that i enabled everything again.

RyperX

Thanks!
Will test this next week when i am next to the router again

RyperX

Sadly i still had the problem with completly default config. Should i reset and restore no config and try it that way? The funny thing at the moment i am on beta6 and i upgraded it already to a newer version on another partition, because a crash i needed to go back to beta6. Is it possible to get an...

RyperX

Thanks, will try this out the next days.
I only need to download the update file from the homepage, but it into "files" root folder and reboot the router, as i am remember correctly

RyperX

Hey guys, i have a problem with upgrading my rb2011 to the latest version. At the moment is 7.1beta6 installed and when i try to install to 7.1 or 7.1.1 the router reboots and at the next boot it is still on the beta6 I only see in the log files a kernel failure: kernel failure in previous boot At t...

RyperX

Thanks for your response, will check this with additional logging. The problem is the router is at anothers home and the only solution for them is to reset the router (power unplug and re plug) So the logs are most of the times gone and i cant debug at the time the problem occurs. When i am at their...

RyperX

Hi guys, i have a problem with my rb2011 and a PPPoE connection. After setting up the connection everything works fine, but after x hours (x = different every time) the connection gets lost. In the logs i dont see any special information or logs that the connection is lost or PPPoE is not reconnecti...

RyperX

Hey, i got today my rb5009 and the first thing what i tried was to repartioning the storage. So that i can keep the "stable" pre Installed Firmware 7.0.5 and upgrade to latest RC. Sadly partitioning is not working, after failing on 7.0.5 i upgrade to latest RC 7.1rc7 but still paritioning ...

RyperX

Short Update, i wrote with support and they were only telling me to downgrade.

There is something wrong with routing. One plugin was the wan Speed but also local routering between the networks.
CPU was every time at 100%

RyperX

Hi guys, i have a problem with the newest beta. I use the router in an home enviroment and need the router for daily work. Problem is i cant achieve with latest beta my maximum WAN speeds anymore. I already connected a laptop to my internet moden and this isnt the problem. I did a complete reset of ...

RyperX

The RB2011 still supports partitioning. So partition it into 2 partitions, copy your current config to second partition, and update it. When you are not happy, activate the 2nd partition and reboot and you will have the old version. When it fails to boot or you powercycle it halfway through the boo...

RyperX

Short question, anybody tested it on an rb2011?
I would like the openvpn udp feature but my router is my main device at home. I dont use anything on special features

RyperX

I dont use LTE anymore because it never worked fine. I really dont understand why Mikrotik dont Support the Huawei Stick. It is one of the most common out there. You can install on any openwrt router the ncm driver and it is working fine and perfect. Still i switched from LTE to a cable solution, do...

RyperX

Some of the wiki and forum says to create dhcp server on ether5 (which works) and take it out of the bridge, but then I loose hardware acceleration and they don't route My first thought. When you set the DHCP Server on eth5 and disabled the bridge. Did you also set the IP Adress on the eth5 interfa...

RyperX

Mmh i exactly understand how hairpin-nat is helping, maybe i dont understand it correct^^ My network: address-pool=dhcp-local authoritative=after-2sec-delay disabled=no interface=bridge1 lease-time=1d name=dhcp-local address=192.168.1.0/24 dns-server=192.168.1.2,192.168.1.3 gateway=192.168.1.1 netma...

RyperX

Was my first idea but it is not working because the DNS Server is on the same subnet as the clients.

RyperX

Hello guys, i need your help. I have a DHCP running in my network and set to use the mikrotik router as DNS Server. On the same network are also 3 Devices that should use a different DNS Server. Is it possible after reserving an IP Adress to set an different DNS Server only for the specified adress?...

RyperX

Thank you for providing this service for so long, worked really well!

Maybe you could create a guide how it would be possible to create such lists by his own or where you fetch all the information?

RyperX

Ok thank you, Another problem i came up now is, the export of my configuration is all time the same. It doesnt differ if i use /export /export compact /export compact hide-sensitive Dont wanna post complete config with so much information I also did now a complete reset of the router and installed t...

RyperX

Sadly its still not working. I deletet now sfp1 from bridge configuration. Tested now with ping from an internet/external computer to my WAN IP Address and do log the information. In the test i didnt set an incoming interface. https://i.imgur.com/jqD0yb8.png It still tells me it is incoming bridge1 ...

RyperX

Hey guys, i found out today that i have a big problem in my configuration since 6.40 because there was something changed about the bridge handling. After the upgrade to 6.40 i had to reset the router (rb2011) and to install the old config with a backup. My Config isnt that complicatet WAN Interface ...

RyperX

What is the reason you want to do this for? Streetpassing for 3DS Here, this will generate a new mac address. It's dirty, but it works. just set the add a command to set the mac on the interface you want, then run the script every 30 minutes. :local hexArray 0abcdef0123456789abcdef012345abcdef01234...

RyperX

I updated to latest rc40 and i lost my complete interface configuration. (As i know i came from rc38)
All interfaces was resettet and every setting that had an interface applied was set to unknown.

Any idea what happen? Device rb2011

RyperX

Latest RC is working fine on rb2011

RyperX

Hey guys, i hope you can help me. I want to create a script that change every 30 minutes the mac adress of a virtuell wireless interface I know i can set the mac with interface wireless set profile mac-address=xx...... But how would a script looks like when i want interface wireless set profile mac-...

RyperX

Hi guys, i need your help. Setup: openwrt router with USB LTE Modem in Bridge Mode to my Mikrotik. The problem is the router gets an 24h official dhcp ip adress, but the dhcp client thinks it will last for 7 days. Because of that i use netwatch to monitor a wan ip (google dns) and when it get an tim...

RyperX

The best thing would be when mikrotik is importing the ncm driver from the e3372 stick.

Its working really nice with openwrt.

At the moment i am using a router with openwrt firmwar in brdige mode with the mikrotik.
Not beautiful but working

RyperX

Works fine on 6.30.2 with lmt labeled huawei on hilink software. exists e3372s or 3372h versions. both must have the hilink software. but if the e3372 is in ppp modem modus lte reachs only 30 mpbs. in NCM-Modus it reaches full lte speed as its sector delivers. it is possibil in next releases t...

RyperX

the 3webgate3 from ZTE is no longer produced now the have the 3HuiGate which is manufactured by huawei ... so there is no bridge! if you need the bridge mode ... use the 3HuiTUBE! it's a ZTE device and there you have the possibility to switch to bridge mode. cheers Mmmh ok, at the moment there is a...

RyperX

OK, i will ask my question different

What is the cheapest Mikrotik solution to get a LTE 150/300mbit connection working?

Because as i know the e3372 solution means a capped ppp connection or a hilink connection with double nat.
When i am wrong please tell me.

Thanks!

RyperX

so i got my drei.at (H3G AT; 3AT) WebGate3. today (ZTE LTE Router Cat.4) to my luck there was the newest firmware already on it (B09) so i activated the SIM card and went online with it! i activated " Open Internet " via the online drei.at customer center and after 10-15minutes it was rea...

RyperX

Thanks for respone. The 3372 can work in 2 modes. In the hilink mode (NAT) and the ppp mode. The problem is that the ppp mode is not working with the mikrotik because it cant achieve the maximum speed. You can read this here: http://forum.mikrotik.com/viewtopic.php?t=89458 As it looks like there is ...

RyperX

Hey guys, i am searching for a solution to use my RB2011UiAS with a LTE USB Modem or Card if possible. On the compatible hardware page (http://wiki.mikrotik.com/wiki/Supported_Hardware#4G_LTE_cards_and_modems) i see that the E3372 is supportet. I have one of these sticks but there are 2 problems, th...

RyperX

Thanks for this information!

RyperX

Where I have already see part of that rules on exact order? :lol: Ah: http://forum.mikrotik.com/viewtopic.php?f=9&t=83387 Sort the rules for efficency (simply drop if coming from blocked list, not first check malformed packet then drop) /ip firewall filter add action=jump chain=input comment=&q...

RyperX

Hey guys, i have a little problem with my RB2011 and the wireless function. I have the latest version 6.35 installed. The problem is my clients have a full signal connection (all bars) in the room next to my router, but the connection speed is really poor and when i have 2 devices in the same room t...

RyperX

I also had the problem that the router couldnt reboot after the update (2011UiAS-2HnD) Unplugged power and after replug the router startet. I know it was my fault that i didnt checked the forum before installation but i dont understand why mikrotik still deliver this update when there are much more ...

RyperX

I have wireless problems since 6.35rc28, didnt changed any config about that https://i.imgur.com/m7j3CFv.png Has anybody else these problems? With what wireless package you see this problem? What configuration you have on the wireless and what wireless encryption you have enabled? What is your wire...

RyperX

I have wireless problems since 6.35rc28, didnt changed any config about that

Has anybody else these problems?

RyperX

Enabled flow control on rpi port fixed. Thanks support team

Sent from my LG-D802 using Tapatalk

RyperX

Hey guys, i am a little bit dissapointed about the lacking vpn client features of the router (rb2011) or did i configure something wrong? I wanna use a vpn service (pia) with the mikrotik but openvpn is not working because the mikrotik does not support lzo compression or udp. I also tried to setup a...

RyperX

+1 LZO & UDP

RyperX

Hey guys, an update i got my stick working in the hi-link mode (stick is his own router) The problem is now the mikrotik would get the private ip from the stick over dhcp and not the official wan ip. Is there any way to get this working? In this way i cant configure the connection for port forwardin...

RyperX

Hey guys, the problem is still there. I found following out: When the rpi and pc is connected to switch1 i recieve this errors. When i connect the rpi OR the pc to switch2 the problem is gone. When the rpi and pc is connected to switch2 the problem is gone. I already did reset configuration and did ...

RyperX

Edit: On post 2 i wrote what i already tried. Hey guys, i need your help because i have no idea where to start to search for the problem. I have an RB2011 with 6.34.1 installed. Yesterday i started to install moonlight on my raspberry (stream games from pc to the raspberry) I tested it on my desk wi...

RyperX

Hey guys, qustion, what are now the recommended mode for the e3372s Stick to run it along with a mikrotik? I have at the moment a e3372s in modem mode and i will try to flash it into HiLink mode if it is necessary. I couldnt get an connection at the moment while the stick is in modem mode? Dont know...

RyperX

Hi Guys, i have a question, i try to forward the p2p (torrent) traffic through the l2tp connection on my mikrotik. It is no problem to set an Source Adress List and forward the complete traffic throught the VPN. Rule looks: chain=prerouting action=mark-routing new-routing-mark=vpn-mark passthrough=y...

RyperX

I dont know its a problem of your script but when i update badpeers i get the error in the log
script error: expected end of command (line 47713 column68)
And this error i got one time:
sricpt error: missing values(s) of arguments list

RyperX

Hi,

this would help me and is an fine solution.

RyperX

Hi,

would it be possible to split the level1 list? The other lists are working fine.
I tried to apply the list but the router crashes. It rans out of Memory.
I have an rb2011

Regards

RyperX

Thanks!

www service wasn't running.

Sometimes its so easy

RyperX

Hi guys, i got an RB2011 with 6.32.2 running. i wanna get a traffic statistics running with the mikrotik router. So i read that i would need the IP Accounting Feature with Web Access. I enabled everything but the web access is not working. Cant access page. enabled: yes account-local-traffic: no thr...

RyperX

Also still waiting for this 2 features

RyperX

I have now the same problem with RB2011

Saw the SFP in different shops selling with 100mbit support and now its not working.

I have no idea why its not working.
It should be official supportet
http://routerboard.com/S-RJ01

RyperX

Hey guys, i have some problems with watching twitch streams or netflix when some other people or myself in the house are downloading. So i startet today to learn about the Queue Lists. I configured now some Mangle and Queue Tree Rules but the problem is when i watching a movie over netflix or twitch...

RyperX

Hey guys, I posted it already in "Beginner Basics" (deleted) but i think my problem is more in virtualization related. My previous text: After nearly 6 hours playing around i give up to get this running without help :cry: I wanna try to get OpenWRT with OpenVPN running on my 2011UiAS-2HnD ...

RyperX

This feature tells me nothing but big thanks will check it out. So much tu learn

RyperX

Hi!

I have the 2011UiAS-2HnD

RyperX

Arg... switched last week from my home consumer router to the great mikrotik devices. After setting up the easier things the last day i wanted to setup openvpn. Now i found out its not supporting udp :( Its really sad because many public wifi networks only allow the udp port for the openvpn connecti...

RyperX

Another question about the ethernet1 and pppoe-out1 interfaces. After i switched the default configuration rules from "In. Interface= ether1" to pppoe-out1 for example the WinBox and SSH Conections didnt work from the internet/wan side. I had to add a rule that the access to pppoe-out1 is ...

RyperX

Thanks! Okey, i also read that the Master/ Slave configuration is faster then briding every interface itself.
Is this because in master/slave mode the interfaces communicate directly?
When the interfaces in Bridge Mode they have to go throw the switch for every connection?

RyperX

Yeah! Thanks very much, i changed the internal interface to bridge-local and it works instantly. At the moment the configuration was 2,3,4,5 separetly bridged and 6 master 7,8,9,10 slave. I changed it to 2 master 3,4,5 to slave. I will later use the eth1 as master but i have to wait for my sfp. I do...

RyperX

Thanks for you input about security, i edited the #1 Rule with icmp and set under Extra the Limit Rate to 10/s. I let Burst at default 5. Hope this settings are correct #3 Rule is Drop In.Interface ether1-gateway. Should i switch here to pppoe-out1? Still i cant get the Upnp feature running. I activ...

RyperX

Mmmh, any idea how i could troubleshoot the problem?
Any log files about that or check thats the upnp service is correct running?

RyperX

Sadly its not working. (Tested with Skype and Plex for example)

Do you know how the NAT Rule should look like when its automatic created or am i wrong about this rule?
When Upnp is working where i can see the automatic opened Upnp Ports?

Filter Rules:

RyperX

I think its pppoe-out1

I tried the upnp service with my ps3 (Test Connection is an extra step for Upnp) and on the windows client i tried it to find the router under network

RyperX

Hello! I have since yesterday my first mikrotik device and its working really great. I already set-up some Rules and managed the most with the information on the web ;) But now i have the problem that i cant get the Upnp feature running. About my configuration, it should be everything default becaus...

Search found 80 matches