MAke sure this is in IPv6 > routes dst=::/0 gateway=2001:db8:1234:5678::1 (put the HE.net end of the WAN /64 instead of my example IP) It is. That's why i'm confused. Everything is like the way is should. I've read 10 or 20 guides and they all say the same. But i won't work for me. Flags: X - disab...

If client says there's no route, it probably does not have it. Check the routing table ("netsh interface ipv6 show route" for Windows, "ip -6 route" for Linux). And you also have to enable some forwarding in router's firewall. Now you accept established and related connections, ...

I've also tried to make a ipv6 network. I've got a lot working but not everything. All my hosts can get a ipv6 addres form my router. My router has a 6to4 config from where i can ping 'external' adresses. But it goes wrong on the route from my 'local' network to the 'external' network. When i ping f...

Hi, I've a feature request for CAPsMAN. I really like the auto frequency options in CAPsMAN for the 2,4ghz range. But i like it a bit less in the 5ghz range. This is because of the following. Right now i've a hAP ac lite EU version. This device supports 5150MHz - 5875MHz. In the netherlands there ar...

Check the length and quality of cable between your devices.

hi guys, i can't mannage to get my hurricane electric ipv4 to ipv6 tunnel working. I've copyed the code of their website. Which didn't work. i've added and changed a few things but i won't run. I've the following settings: /interface pppoe-client add ac-name="XX" add-default-route=yes comm...

A russian webshop has the RB3011 in preorder here:
http://www.lanmart.ru/mikrotik-rb3011uias-2hnd-in.html

It's the version with a 2 GHz wireless card.

If i'm correct they sell it for 8662 RUB witch is approximately €120,-

I dont understand why hAP AC will have only 160 mW output power? Why reduce the output power from 1000 mw to 160? Also CPU is only 650 Mhz, that is too poor for this time we live.. Normis, why you dont make hAP AC with 1000 mW Wireless power like 951Ui, 951G and RB2011UiAS?? where did you see that?...

Are these to-be-released sector antennas from mikrotik??
If so, Very good idea

It would be nice for mikrotik to make a difference between consumer grade and professional grade. This could be possible by making 2 specific cases. The white rackmount CCR en CRS are the proffesional gear. The new hAP lite design for All the consumergrade gear. And why all the new names for the Rou...

Hi, I've the following problem. I've a wireless internet connection to a 'local' ISP. This wireless internet connection is made with a mikrotik SEXTANT G 5HPnD which is in bridge mode. They're using PPPoE to give the IP's. My own RB2011 which is connected tho the receiving sextant is the PPPoE clien...

Thanx, i'm gonna try it.

hey guys, I'm a bit stuck on the vlan's in RouterOS. My experience with vlan's isn't that big so maybe it is just my disunderstanding. But this is the situation i want to create. Right now i've a temporary situation with bridges. Untitled.png The RB2011 is my main router. Port 1 is WAN with external...

i've already found the problem.
Client-to-client option was no enabled in datapaths.
Which i think is weird but okay..

Hey guys, The last few months i've ugraded my homenetwork with different wireless AP's controlled by CAPsMAN V2. Today i came across a weird problem. My printer lost connection so i had te re-add it. It is a Samsung SCX-3405W wireless printer. But when i searched it via wifi i could't find it. But w...