This is correct, Harms. Your mobile operator doesn't give you full access, this is why you only get "WAN". it is possible that LTE provider filters some unknown ports, as you can see in the manual, UDP port 30000 needs to be open by the ISP, to get maximum status. https://help.mikrotik.co...

Hi! I have one problem with hAP AC3 LTE6 Router OS. I enable the internet detection function on the router WAN ports (lte1, ether5). On ether5 (TET cable internet operator) this option working fine UNKNOWN>WAN>INTERNET, but on lte1 (Tele2 operator) this option working in this way UNKNOWN>WAN. Router...

Hi ! Please change Account, password, and secret by your own #VPN type: L2TP #Account: UUUUUUU #Password: KKKKKKK #Secret: SSSSSSS /ip pool add name=VPN ranges=192.168.99.1-192.168.99.254 /ip ipsec peer add name=peer1 passive=yes /ip ipsec policy group add name=group1 /ip ipsec profile set [ find de...

Situation update

I take from my IT guys another Mikrotik 951G-2HnD unit and test it with default configuration and it’s WORKING …. Mystic … my router with same configuration, firmware and packages DON’T WORKING …
LOOK like hardware problem 

1. I trying recommended settings with restart – same problem :( 2. I take from my IT security guys another model Mikrotik router RouterBOARD 450G (without Wifi , LAN 100Mb/s) with same packages (6.29.1) and firmware (3.22) versions. With it (default setting) my Samsung TV work perfectly, without any...

try disabling bridge filtering rules assign lan ip address from ether 2 to bridge local interface I already trying this settings but separately. After changing LAN ip to bridge-local interface also doing router restart, but bridge filter rules disabling without restart. Today I will try both settin...

Can you export your router config and post it here. it will make it easier to see what's going on. # jun/30/2015 15:41:34 by RouterOS 6.28 # software id = VWU5-9RJL # /interface bridge add admin-mac=D4:CA:6D:19:XX:73 auto-mac=no mtu=1500 name=bridge-local /interface wireless set [ find default-name...

Situation update. 1.Physically Ethernet interfere status is running 100MB/s full duplex (TV have only 100MB/s port).I trying turn off autonegotiation and set speed to 100MB/s, port status running, but still no Internet. 2.I’m trying connect my TV to the internet through my old Linksys WMP400N router...

I have problem to connect Samsung TV 65JS8502 to internet through a wired connection. It didn’t receive IP config from DHCP and it also don’t working through manual IP configuration. Through Mikrotik 951G-2HnD wireless connection is all ok and my TV see Internet without problem. If I connect TV dire...