I wanted to know if there is a way to find and save the amount of traffic passed through an interface, for instance the amount of data going out to and coming from the Internet to the local network (total upload/download). i have some ideas in mind for doing them but dont really know if they are app...

This is a problem I've been having for quiet a while now, a user logs on the hotspot, after some time the user gets disconnected but is still active in the hotspot active tab, thus he is not allowed to connect to the hotspot via the same device again and gets the simultaneous session limit reached e...

hey guys, im really frustrated with the way mikrotik work on connection marking its sooooo illogical !!!! or at least seems that way, any help is more than welcomed! i try mangling a connection that comes in from a specific interface with a source address from an IP list, but than i realize either s...

BTW i was pinging the /30 device using mikrotik pinging tool via the connecting interface after its address was changed to /25

the confusing thing is that mikrotik says that "By default forwarding decision is based only on the value of destination address. Each route has dst-address property, that specifies all destination addresses this route can be used for. If there are several routes that apply to a particular IP a...

plus i tested changing it to /25 still get no ping reply from 10.10.1.254

thanx but can u reference me to a text where i could study more complicated routing to sort this with out touching the 10.10.1.0/24 subnet?

I have an interface with a 10.10.1.1/24 ip
and another interface with a 10.10.1.253/30 ip and i want to make a route between them!!! somebody help please!!!
ive configured the routing table on the client side and they see 10.10.1.253 but they cant see 10.10.1.254 thats on the other side!!

Hey after hours and hours of reading vague texts i finally figured it out and put it to work, and guess what? it works like a charm!!!! before saying anything i refer u to this link for a very vague and short explanation on marking and queuing http://wiki.mikrotik.com/wiki/Manual:HTB theres a couple...

I'm having some trouble on setting a QOS on the company Voip, I've set up the mangle to mark the voip packets and a simple queue for both voip marked and unmarked (only voip packets are marked) packets with limitations on upload and downloads and the voip has plenty of bandwidth left to use but stil...