Hm not available in GOOGLE PLAY
We're sorry, the requested URL was not found on this server.

Use the first link to join the alpha testers group. The second link will work as soon as you become a member.

thx worked

Hm not available in GOOGLE PLAY
We're sorry, the requested URL was not found on this server.

I mean no one? :( I was doing my export from all important sections , steb-by-step to import to my second , older, mikrotik (RB750GL) and during that process I looked to IP/ARP. And delete just in case the APR entry of my ISP gateway, because it was with D flag (dynamic) I figure it out that after ...

also enable ip cloud so you have a free dynamic dns service from mikrotik. (if u dont have static ip of course ) Wow, I didn't know that mikrotik has such a service avalaible :) So there's a lot of possibility. But the best is VPN or you can use Knock Port Rule in firewall. And then you will be abl...

Use Google

About that firewall port scanning rules in MT. I Saw few posts from the past year and people did notice that none of those tutorials describing rule examples works. And I checked few of them for example this one http://wiki.mikrotik.com/wiki/Drop_port_scanners (because is more complicate ;) ) and it...

I mean no one?

Are you sure you didn't turn on web proxy and are running an open proxy? That level of traffic is not enough to be considered a DDOS, something else has to explain the high CPU. Check your WAN throughput (in both mbps and PPS). Web proxy is disabled. But still got those traffic coming in. I checked...

Are you sure you didn't turn on web proxy and are running an open proxy? That level of traffic is not enough to be considered a DDOS, something else has to explain the high CPU. Check your WAN throughput (in both mbps and PPS). Web proxy is disabled. But still got those traffic coming in. I checked...

I can add that I've been using the same example for setting ip ipsec peer set 0 policy-template-group=*FFFFFFFF failure: can not change dynamic peer But Like you all see I got failure with message above. Reason for this was obvious. In new MikroTik (mine is RB750Gr2 / hEX) when adding L2TP you can c...

So from couple of weeks I noticed strange behavior which on the beginning I started to think that's the problem with my ISP. I called them couple of times. And they said that nothing occurs wrong on their side. I have two devices connected : ISP Router - http://routerboard.com/RB750Gr2" / Mikro...

I Checked with Eset and offline with livecd nothing found. Although I have Server , one of the virtual machine has transmission service started but nothing is seeding there. I will monitor my LAN , but last time I checked the ether1 those packects coming through ether1 (wan) weren't addressed anywhe...

Had the same issue. Just added additional '0' -> 0x8 -> 0x08

No one care.. ok :/

20 ;;; 0:0 and limit for 5pac/s | Echo replay chain=ICMP action=drop protocol=icmp icmp-options=0:0 limit=5,5 If you see I have droped number 20 which is the echo replay. I don't replay on pings at all. When I put command 20 in to firewall it blocks internet access, which by the way is what I have ...

Please try the link. I'm sure that 8:0 is a ping request but the ping replay is 0:0 19 ;;; 8:0 and limit for 5pac/s | Echo Request chain=ICMP action=accept protocol=icmp icmp-options=8:0 limit=5,5 20 ;;; 0:0 and limit for 5pac/s | Echo replay chain=ICMP action=drop protocol=icmp icmp-options=0:0 lim...

Did you read that wiki? http://wiki.mikrotik.com/wiki/Securing_ ... rOs_Router

It's says how to prevent ping flood. For sure not blocking whole ICMP protocol

Hey, My router is 750GL and from monday (05/10/2015) , behind him is Thompson router from my ISP provider which should be in bridge mode. Said 'should' because on MTR test I see strange IP behind my mikrotik but I will explain it later. Now to the point -I'm struggling with @Net problems. Symptoms a...