MikroTik

Arxondas

Hello, I have config the /tool email and router can send emails (tested OK). Then I used the following : /system logging action add name=PSD email-to=a@a.com target=email /system logging add topics=firewall action=PSD prefix=psd and also enabled log=yes with log-prefix=psd in my firewall rule. My pr...

Arxondas

Hi,

Thanks for the suggestions. I'll check it later.

thanks

Arxondas

Hello, We don't use PPPoE as WAN. We have a static ip for the router and a gateway that our ISP provide us and I have only firewall rules to block access between the 2 networks. Don't have anything else in firewall. here is the config from the mikrotik i got the problem. I changed a little the sensi...

Arxondas

Thanks for the info.
I will contact again my ISP to ask them about the actual MTU they have setup on my line
and I will see after that.

thanks

Arxondas

Hello All, I have a RB1100 AH X2 (routeros v 6.47) with simple setup to provide internet for 2 networks (Offices and customers). My line is 100Mbps (up/down) from fiber line. We have some wired problems with internet. For example netflix is too slow to start a movie or www.speedtest.net takes too lo...

Arxondas

Hi,
I didn't continue with the project and I don't have the knowledge to help you .
sorry:)

Arxondas

Hello,

Thank you all for your help. After a lot of tests and phone calls to my ISP
we found that they have problems with their routes in network so they admit
its their problem and I'm waiting to fix them.

thanks

Arxondas

Backup your config. Reset to default an test. If everything is ok then track which part of your config is causing the issue. Thanks for suggestions but I forgot to say it. I already did that. I did reset of the router but no luck. I also updated the RB to latest stable version but the same. My conf...

Arxondas

Hello all, I would like some help about a strange problem I have in my home. I use a RB2011UiAS-2HnD-IN with basic configuration to provide wireless access to Internet for 2 laptops and 4 mobiles. No firewall rules or extra special configuration and line is 30/3 Mbps. Last 5-6 days I have problems p...

Arxondas

Hi, I couldn't find what is wrong and I deleted everything. I made new rules according what I read from https://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ_Examples /ip firewall mangle add action=mark-packet chain=prerouting comment="Office Network" in-interface=bridge.offices.lan new-packe...

Arxondas

thx,

I try again tomorrow to see whats wrong.

Arxondas

Hey,

Thanks for the help I change the mangle rules to prerouting but nothing.
Queue tree don't work correctly. I double checked everything but I got them as you
suggested. Maybe I missed something...

Thanks

Arxondas

Hi,

I'm not using FastTrack.

I used your rules but in queue tree the download isn't working.
I can watch all traffic with upload rules.

Thanks.

Arxondas

hey, Thanks for the suggestions. I got some questions because didn't understand all perfectly...:) "...* don't specify max on children queues, only "limit at", so that these can use all available bandwidth of parent. Right now even if office is using 0, hotspot will be limited to 100....

Arxondas

Hello, I would like your help if my rules are OK. I have 150M/150M bandwidth which I provide internet in two networks (Offices & Hotspot). I want to equal share bandwidth for all users but to limit all users in hotspot network up to 100M/100M so Offices network will have minimum 50M/50M bandwidt...

Arxondas

Hello, Thx for your replay. Because mikrotik gives internet to other devices also except of the Server I want when I connect to mysql from outside to have priority to traffic if my bandwidth is full because some clients e.g. download something. Same for upload when the Server needs to answer to an e...

Arxondas

Hello all, I need your help about a mangle rule. I have a Server with mysql behide a mikrotik router. I want to give priority to the mysql port (3306/tcp) over everything else for so mysql Server will always have best traffic from & to internet. my mangle rules are : /ip firewall mangle add acti...

Arxondas

Hello, I don't know if I did something wrong but I deleted all sites from walled-garden and I added them again using domain name (https://www.domain.com/*) and IP of servers also and it worked without problem. Now I'm using the latest version of RouterOS. Nothing special in our setup. We just edit t...

Arxondas

thanks for the suggestions ppl.

Arxondas

As CaPsMAN AHx2 can handle number of AP but maybe will be a problem for traffic of 1200 clients

Thank you for your replay.

I calculate about 8-9 clients on each AP which I believe is OK.
Do you mean that maybe AHx2 will have problem to handle traffic of 1200 devices ?

Arxondas

Hello all, I'm planning to change my network configuration so I can have central management of my access points with Capsman. I will use 1 x RB1100AHx2 and 160 RB952Ui-5ac2nD Hap AC Lite. My question is can RB1100AHx2 handle all of the 160 AP without any problems. I will offer hotspot with registrat...

Arxondas

Hello all, I need your help for a problem with hotspot. I'm running hotspot on RB1100AHx2 and I'm also using external https Server (php 5.6) to host the hotspot pages. I have change mikrotik login.html to redirect to my external server (e.g. https://www.domain.com/login.php) Everything works fine bu...

Arxondas

Hello all, I would like some help about vpn with opvn. I have 3 sites. A) Head Office B) Branch 1 C) Branch 2 I have setup vpn with ovpn at : 1) Head Office <-> Branch 1 2) Head Office <-> Branch 2 which is working fine. Now I would like to give the option for Branch 1 to communicate with Branch 2 w...

Arxondas

Thanks,

I'll try it asap.

Arxondas

Hi,

Public IP is on mikrotik and web server have local IP (192.168.0.1)
So I guess I need a dst-nat rule to forward port 80 & 443 to Web server.
will that affect the hotspot function ?

Thanks

Arxondas

Hello all, I would like some help for my project. I have an RB1100 which runs hotspot so I can offer free internet to customers with registration. I want to add a web server (http & https) behide the mikrotik. Τhe server must me accessible from hotspot network and from public network also. Acces...

Arxondas

Hello all, I would like your opinions for the new google login restrictions. I'm running hotspot on RB1100 with external https server and freeradius. We offer registration to our customers with facebook, twitter, google login and Vouchers. Everything was working OK but now google since April 2017 wo...

Arxondas

Hello all,

I would like some help. I need to get ip and mac address of all dhcp leases to import them
to another mikrotik or export all info in a file format easy to process it.

Any ideas please.

Thank you

Arxondas

Thank you very much..!!

I'll try it asap

Arxondas

Hello all,

I need some help with api command.
I want to delete specific host from /ip hotspot hosts from a php page.
I only know the mac address for the host.

I can connect with api to my mikrotik but need help with the command for the delete
or anything else i can do.

Any help please..

thanks

Arxondas

Hello all, I have a hotspot running on RB1100 to provide free internet to customers with self registration (using usermanager). I would love to add some extra futures like social login and I found this solution https://shop.codekece.com/downloads/socialmik/ I would like some opinions about it if any...

Arxondas

Thanks for the replay.

I'll try it and I post results.

Thank you.

Arxondas

Hello all, I got a simple network and I need some help. my network diagram is : network.jpg In mikrotik ports 2-5 are bridge. pc4 shares file folders so pc1,pc2,pc3 can access them but also pc4 have enable remote desktop and http service(80,443) and I want to restrict the access for those only from ...

Arxondas

Thanks for the suggestion.

It's Working now.

Arxondas

ok,

I will try it and I'll post results...

Arxondas

Hi,

NAT rule on R1 is :
0 ;;; WAN
chain=srcnat action=masquerade src-address=172.20.0.0/20
out-interface=ether1-Wan log=no log-prefix=""

so I need to add one more for the 192.168.170.0/23 network ?

thanks

Arxondas

Thanks for the replay.

All PC's in Offices Network have
IP's 192.168.170.xx
gateway 192.168.170.1
dns 8.8.8.8 - 8.8.4.4

Thanks

Arxondas

Hello all, I have 2 Mikrotik 6.41.2 routers in my network and I have setup static routes to avoid double NAT but I can't make it work. I also checked this post https://forum.mikrotik.com/viewtopic.php?t=54800 I attach my network diagram to make it easier. network.jpg Main Router (1st) is working OK,...

Arxondas

Thanks for the replay. Rules order is like my post. I Didn't mention that, sorry.

I created address lists and changed the 2 rules like you said and Everything
is working like I want

Also I deleted the other 2 rules since there are no point to have them.

Thanks again.

Arxondas

Here is all my firewall filter rules chain=input action=accept protocol=tcp in-interface=ether9-WAN dst-port=1723 log=no log-prefix="" chain=input action=accept protocol=gre in-interface=ether9-WAN log=no log-prefix="" chain=input action=accept connection-state=established,relate...

Arxondas

Hello, I have setup VPN PPTP Server on Home Mikrotik. I can connect and also see all the devices in my network (ping, rdp, vnc, etc). Everything is working as I want. Recently I added some rules in Firewall and I found that the following rule add comment="Drop All Forward" chain=forward ac...

Arxondas

thank for the help.

I stay with PCQ and I'll see how it will go.

Arxondas

OK, then I'm good. I also read this post https://forum.mikrotik.com/viewtopic.php?t=113191 and because sometimes I watch TV from Internet (it needs 7-8Mpbs) and rest of family are watching youtube, facebook, skype, e.t.c. will be better to use SFQ instead of PCQ because if we are 5 ppl using interne...

Arxondas

Thanks for the suggestion.
From what I read again its better that way.

Will this prevent one client to take all bandwidth when other clients are using internet also ?

thanks

Arxondas

Hello, I want to share bandwidth of my line (30Mpbs down / 3Mpbs down) to all clients equal. I used the example from https://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ_Examples and I have create the folowing rules : /queue type add name="PCQ_download" kind=pcq pcq-rate=30M pcq-classifier=d...

Arxondas

OK, If I got it correctly then I need to create this rules for my line (50 Mbps download / 5 Mbps upload) /ip firewall mangle add chain=prerouting action=mark-packet new-packet-mark=upload passthrough=no in-interface=bridge1 log=no log-prefix="" add chain=postrouting action=mark-packet new...

Arxondas

Thank you. I will try your suggestion.

Arxondas

Hello all, I got an RB2011 v6.41 for home use and I would like suggestions about equal share bandwidth among clients. I got VDSL 50Mbps and I have configure so far this : /ip firewall mangle add chain=prerouting action=mark-packet in-interface=ether9-wan new-packet-mark=client_upload /ip firewall ma...

Arxondas

Hello all, I would some help about priorize traffic. I have adsl line 24Mbps and 4 pc's directly connected to mikrotik with static ip's. Mikrotik got simple setup to provide internet to pc's. I would like to priorize http/https, dns requests over everything else (ftp, downloads, games, etc) and also...

Arxondas

Hi all, I would like some help for a problem I got. I'm running hotspot on RB1100 with usermanager as radius server. I would like to disable sending email from usermanager when a client completes the registration. In wiki mikrotik it says that on sign up "...account data will be sent to this ad...

Arxondas

Hello, I have only one masquerade nat rule in my main router. chain=srcnat action=masquerade out-interface=ether1 on second mikrotik I dont have any nat rule. On main router I ceated the nat rule chain=dstnat action=dst-nat to-addresses=10.10.10.2 (ip of 2cd mikrotik) to-ports=3389 protocol=tcp in-i...

Arxondas

Hello,

Thanks for your post.

I'm not so good in Router OS. So you mean I need to make
3 rules in main router that with the config you suggested or I need
on both routers

Thanks

Arxondas

Hello, I was searching for help and I found this post. I have similar setup in a my network and Im using nat and routing as suggested above to avoid double nat. In your network topology if you want to port forward e.g. port 3389 from outside to a pc in network 192.168.210.0/24 for remote desktop wha...

Arxondas

Hi,

Thanks for the help. I'll check it out.

thanks

Arxondas

Hello, I searched forum but couldn't find a solution for my problem. I need to port forward e.g. port 4455 to 3389 for remote desktop to a PC. I got RB1100 as main router connected to internet with network 192.168.1.0/21 and ip 192.168.1.1 which offers internet with hotspot to customers. As 2cd rout...

Arxondas

Hello, I would like some help for my network setup. I have an RB1100 as main router which offers free hotspot with registration using usermanager. (e.g. IP = 172.20.0.1, network 172.20.0.0/22 and netmask 255.255.252.0). Everything works fine... Dhcp offers ip to customers from 172.20.0.40 until 172....

Arxondas

Hello ppl, I have setup a free hotspot on RB1100 (6.39.1) with usermanager for registration. Everything is working OK. In signup page I want in e-mail field to allow only lowercase letters and some other characters like "@", "-", "." I have tried using : 1) style="...

Arxondas

I found the problem.

On Hap ac at bridge I had to set protocol mode = none.

Everything is ok now.

Thanks for the help.

Arxondas

bridge have ether1 and wan1.

dhcp client is on bridge and my hap ac is connected
to the main router with cable from ether1.
No vlans or tunels exists.

I can see the main router at Neighbors but I cant ping it.
it says no route to host

Do i need to add a router manualy ?

Thanks

Arxondas

it seems that dhcp client is working only if i use it on ether1 and its not working on bridge

Arxondas

Thanks for replay.

I have configure it as you said but my main problem is the DHCP.
DHCP client is not working and I dont get IP from main router.

I have created dhcp client for bridge but nothing.

Anything I can check up ?

Thanks

Arxondas

Hello, I would like some help please. I have a small network with RB951 as my main/hotspot router. I want to setup 4 RB hap ac lite as simple access points for customers so they can connect with wifi or cable for internet access. I cant configure the RB hap correctly. I want to use ether1 for connec...

Arxondas

I can use the firewall rules on the edge devices that
customers use.

So I need this rule ?

chain : input & forward
protocol : upd
dst port : 67 &68
in interface : bridge1
action : drop

Does this rule will allow customer dhcp request and will block rogue dhcp ?

Thanks

Arxondas

ok thanks. So in every mikrotik Access Point I'll create firewall rules to block DHCP ports. My plan is to block all ports to be sure. e.g. chain : input protocol : upd dst port : 67-68 in interface : bridge1 or ... action : drop In the central router I need any rule or only in the access points ? T...

Arxondas

Hello, I would like some help to block rogue dhcp servers. We have a network with RB1100 as main router and 140 RB ac hAP Lite connected with capsman and we only offer a free wifi/cable access with hotspot login for customers. All customers access internet from mikrotik devices I would like to use s...

Arxondas

Hello, Im using userman for my hotspot. In the signup page I would like to hide the profile option since I have only profile in userman. I'm using in html the : <input type="hidden" name="buy_profile" id="buy_profile" value="1"> but I get error for invalide pr...

Arxondas

Hello, I would like to ask your opinions. I want to make more simple and fast my free hotspot service on RB1100 (6.38.1). I'm curently using User Manager. Client have to sign up giving a name and an email (which is the username), all other fields are predifined and I store in user manager database t...

Arxondas

Hello all, I would like some help my hotspot. I have set up a hotspot (free of charge) using radius server and user manager on a mikrotik 1100 (L6). Customers must signup so I can have their e-mail and Full Name for security and marketing purposes. To make it more simple I would like the customer to...

Arxondas

I decide to use the phone field to collect the First Name and Last Name (both in same field)
since I don't want the phone.

It works OK for now and from U.M. I can export in csv file the e-mail and the name
which is the fields that I want. Plus you can edit the csv titles.

Arxondas

Hello all, I search a little but didn't find any answer for my problem. I'm using User Manager with Radius so customers can signup and use my hotspot for free. I used the default signup page that mikrotik had. I want to make a change. Instead of e-mail I want customers to write their First name. In ...

Arxondas

Hello, I have a Mikrotik RB951U-2HnD and a Ubiquiti UniFi AP LR indoor access point MIMO 2,4GHz. Both got the latest firmwares. On RB951 I have setup WAN on ether1 and I have connect a switch 8 port and on ether2 which I have connect my pc's and the unifi. I want to use Vlan for my Unifi. I have don...

Arxondas

Hello all, I new to Router OS. I got my mikrotik RB951Ui 1 week ago. I have configure the basic but I would like some help with p2p. I have a PC (IP 192.168.55.10) with utorrent listening in port 53041. Port on PC firewall is open and tested. I need help to configure my router to accept p2p connecti...

Search found 72 matches