What value do you have in

Code: Select all

/ip hotspot user profile shared-users

?

100 and 250.

OK so if mobile devices can work i assume that your router can reach DNS. Of course you trying to type in url any non-https address and after that nothing happens? when I delete an IP from IP - Hostpot - Hosts. An Ip that havent loged yet, the hotspot appears. The login settings are in COOKIE and H...

OK so if mobile devices can work i assume that your router can reach DNS. Of course you trying to type in url any non-https address and after that nothing happens? Yes, Im trying to reach a non-https site and with mobile devices I could. But with some of them, windows phone doesn't work for example...

Check if your hotspot-router can reach your dns server (8.8.8.8 in your config)?

With mobile device It works, with other devices types I cannot see hotspot portal.

Hi, I have a problem with Hotspot and VLANS using Ubiquiti UAPs here I show you my config in mikrotik, If i disable the hotspot I can use internet perfectly. The UAPs in Ubiquiti Unifi software are in VLAN 100, 200, and 300 witohut problem with hotspot disabled. I can reach gateway with hotspot enab...

I think active DDNS from Ip, Cloud And select true on DDNS after some time you see code that meaning DDNS. Hi. I don't undestand. I can enable DDNS in IP -> Cloud.  But I have problems with firewall rules. With current config I can't use DDNS and I don't want to disable ''Drop'' rule since its risk...

I think active DDNS from Ip, Cloud And select true on DDNS after some time you see code that meaning DDNS. Hi. I don't undestand. I can enable DDNS in IP -> Cloud.  But I have problems with firewall rules. With current config I can't use DDNS and I don't want to disable ''Drop'' rule since its risky.

Hi, I want to use DDNS but I realised that with current config I can't connect. If I disable the drop rule it works perfect.  How can I add a rule to allow DDNS?. Or modify this.  0 XI  ;;; place hotspot rules here       chain=unused-hs-chain action=passthrough log=no log-prefix=""   1    ...

you should packet mark per ip address then manage it 

Thanks. 
I need to create a DHCP server per VLAN interface, right? So this I can control what IP has each Access Point and mark it in firewall -> mangle.

yes. you do. you can manage it with packet mark

Yes, the thing is how to do it. Packet mark by Ip address list?
I need to use hotspot per WLAN so this is another problem.
I will need to create a hotspot server per AP VLAN?

Attach scheme  of your site.  Why you want control AP traffic directly? Maybe use shaping of clients or services? If you want separate AP traffic to queue you need QinQ vlans. http://uploads.tapatalk-cdn.com/20160726/1fa33ef10add43c60a7bb0d92a30e21a.png Have a good day! [ltr][color=#3e3e3e][size=10...

You can add queue tree directly to a VLAN, when that is visible in the router where you do the limiting. When not, you should know the routing further down the path so it should be possible to know that to match (if not VLAN). Can you tell me an example, how can you do that you're saying? AFAIK eve...

Yes, you can do what you describe there, using a queue tree. What is your question? Currently I'm marking packets by Source-Destination IP address list.  But I don't know how to mark packets to separate that traffic (by AP traffic) from global WLAN VLAN (several AP). I mean, currently I can manage ...

Hi, I need manage bandwidth by WLAN and AP.  Currently I have a RB2011 with Ubiquiti APs and I do WLAN bandwidth management by WLAN VLAN, for example Visitors WLAN VLAN100 and I create a DHCP server to assign a range of IP so that I can mark that packets. After I have that packets of that WLAN "...

Maybe some tests you could perform. Check IP gateway that is being assigned to the client computer is correct. (subnet etc) Ping the SMB share IP. (probably the 10.128.0.1 ip) Traceroute to the SMB share IP. Torch the interface to see if you are seeing requests. Its rare because sometimes it shows ...

The problem was that was missing the "Management" firewall rule (and ip address list ''management'').

That was the problem

This is Eth1 (gateway).

Also i will try to make the cable shorter, to keep less than 100 meters.

Thanks!!

I have a problem woth access to SMB, i set to all interfaces but I only can access by WiFi (192.168.32.0/24). By ethernet says: "Tha path was not found". Ethernet eth10 is (10.128.0.4-10.128.0.30). enabled: yes domain: WORKGROUP comment: CarpetaCompartida allow-guests: no interfaces: all F...

Hi,

Can you help me out with my problem, the thing is that I continually get down and up eth1 my wan port. Sometimes after many times of down&up remains down and I have to physically reconnect the cable (cat 5e, 115meters).



Thanks for your assistance

I'm using a RB1100AHx2, for example when i set ip address in eth11 10.128.4.1/22, network 10.128.4.0 automatically when i apply this setting it changes my IP local address in quick set from 192.168.32.1 to 10.128.4.1 and i lost Internet connection. Automatically changes can someone tell me why?. Al...

I'm using a RB1100AHx2, for example when i set ip address in eth11 10.128.4.1/22, network 10.128.4.0 automatically when i apply this setting it changes my IP local address in quick set from 192.168.32.1 to 10.128.4.1 and i lost Internet connection. Automatically changes can someone tell me why?. Als...

Thanks in advance. But suppose we have eth1 with ip address 10.128.0.1/24 with DHCP server and eth2 with ip address 10.128.4.1/24 also with DHCP server. If you have two different subnets connected to different ports you're beyond the scope of what Quick Set is for. With that config you'll have to u...

I mean, if we have multiple lan networks with DHCP and all. What IP must we put there in Quick Set - Local Network - IP Address? I figure out that sometimes automatically changes this IP and also sometimes if i set a wrong ip i got no connection to internet. Thanks for your help That's exactly what...

I mean, if we have multiple lan networks with DHCP and all. What IP must we put there in Quick Set - Local Network - IP Address?

I figure out that sometimes automatically changes this IP and also sometimes if i set a wrong ip i got no connection to internet.

Thanks for your help

Hi,

I think you're right. I would create a bridge and set eth4 and eth5 on it. That should works.

Ubiquiti devices also has the posibility to set VLAN per SSID. I never tested it though.

Hi, I have a rare problem that i suppose it's about my configuration. I have two rb1100ahx2, one of these in Bridge mode, in this bridge rb1100 i can access by IP but in the other rb1100 only i can access with WinBox by MAC address, when i put the IP of that bridge interface that i connected to it c...