What if i need to get same results by pinging mac address?

ı just need to get avg-tty result but by pinging the mac address.

My hotspot users are not succesfully able to logout from their first device to connect with another device. they get no more sessions warning when they try to login. i need to logout any user on hotspot and let new one come in when with alredy active username try to connect. is it possible to do it ...

it was exported on 6.43. but i decided to get back to old version. Anybody know hot to convert db for old one?

You have registered cap to capsman, after a while reset cap to factory default and tried to register it back to capsman. you get this message. 21:06:55 caps,error [::ffff:192.168.188.2:57647,IssueCert] requests certificate, but failed to issue: a valid certificate with the same common name already e...

Revoke certificate is a sollution ok, but this happens whenever my caps are reset to default and ask for a new certificate. is there any sollution that do not need any revoking process? device already has certificate but lost it after reset. i think capsman should be creating a new certificate for t...

Advanced management for cap devices,

it would be great if i can change my all cap devices user password, port, service, interface status etc.

is it possible to add warnings when ether rate goes below 100Full. When there is an error on ports its not really easy to figureout for netadmins.

there is no mangle rule on standart hotspot setup. which forward rule we speakin abt?

File not found

Spannng tree disabled on mikrotik port but still mikrotik does not see other mikrotik devices at the other edge of cisco.Before or after spanning tree no other devices on discovery.


Any update?

Default hotspot login with radius auth + capsman. system works perfect but when one of my client connect with own id 1354213535 it works. but when other client try to connect to same routerboard with his own id number. it does not ask for user id and password. directly goes to internet. seems like h...

Any idea how i can set user's till-time to furher time/date on cli?

i created a user who has till date 18/02/18 but i wanna set this till date to further by command.


Thanks!

Calm down

As he mentioned before. Dropping layer7 and adding his pages to L7 list is enough. and woking... BEST SOLLUTION. Point is just finding all pages tried to be reached.

Disabling FTP service just affect your router. Try Filters on your source ip's.

Just off the top of my head. In the firewall: chain-forward source ip - 192.168.0.0/16 protocol - udp ports 67 & 68 action - drop that should do it... Authoritative etc..... not working... this way ive solved it. Trust the firewall.... This was for TPLINK Devices in my network which were provid...

Hi, is it possible to set any expiration date for users in hotspot. Im not asking for uptime or session timeout, i neet to set expiration date and not care if they logged in or not. for example user1 can use his account within 01/01/2017 - 01/02/2017 - after that date user should not be able to logi...

I m planning to update all hotspot pages from a cloud server automaticly. but fetch command just get one file per command. anybody know how to get all /hotspot folder directly from cloud server to cpe without entering all filenames one by one. you can write fetch to get all files one by one. but whe...

no react after 127.0.0.1 what discovery interface should be?

tried to do it on rb493ah but capsmann did not recognise the interface as cap. it does ok for other devices on the network but not for the interface on same board.

one another ap did same again today. debug was not set on this ap and this is all in logs. ive attached picture.

Log says, "MAC disconnected, ok" thats all. ive added the log rule now. ill update once it does again.

Hi, we have a SA5 AP. usually has 20-25 client connected. Randomly kicks everybody out and registation table goes 0. then it does not accept any client to reconnect untill you do scan stop or reboot the AP.

6.35mipsbe - all health details are fine.



any ideas?

Mine never works running 800Mhz, most units tested, i had to press reset button to get it working again.

While 433AH @ 800Mhs performs just the same as 680Mhz. Some units even reboot itself or need hard reboot when running @ 800Mhz.

not working when set 800 it crashes. 6.34.3 - 3.24

Hi all, im setting up a rb750 for a dorm and there will be more than 300 people. i will need to limit them just after they use an amount of data. like after 10gigs speed will be limited to 4. 15gigs speed will be limited to 2. 20gigs speed will be limited to 1mbit is there any scripts for this?

1st can see main office 2nd can see too. But 1st cannot reach 2nd directly.

Nothin yet guys?


Noone has any idea?

Hi, Both offices has PPTP Connection directly to each other,


MAIN 2 FIRST
MAIN 2 SECOND

but first office cannot ping directly second office.



What is the easiest way to reach branch 2 from 1.