MikroTik

daras

Hi,

I am looking to priorotize voip traffic for SIP

is there any general script for QOS in voip?

I want to use a simple queue for voip traffic

Thanks

daras

HI, I have setup which consists of 1 LAN network and 2 WAN in two different ISP's, lets call it WAN1 (fast) and WAN2 (slow) I ve added a default route for the 2 ISP's and the nework goes down. I ve noticed that you cannot 've 2 default routes on the router so i 've changed the metric on one of them....

daras

Hi, I ‘ve installed the latest version 6.42.1 in my RB3011 UiAS-RM and suddenly my router started to do cyclic reboots. I ‘ve tried to netinstall but I cannot see the router. In the console I can see a message “kernel not found or data is corrupted”. Does anyone has the same problem ? Before the up...

daras

Hi, I ‘ve installed the latest version 6.42.1 in my RB3011 UiAS-RM and suddenly my router started to do cyclic reboots. I ‘ve tried to netinstall but I cannot see the router. In the console I can see a message “kernel not found or data is corrupted”. Does anyone has the same problem ? Before the upd...

daras

Hello everyone, Yesterday i ve tried to update my router to 6.41.2 but it crashed. Only the PWR & USR LED's are on now. I 've tried to netinstall it but it does not shown on netinstall. Is there a specific way to perform netinstall on it ? because all the other router's are so easy to do it. Tha...

daras

That depends on what you already have in place. When there is a rule that allows Established and Related traffic (as usual) you only need an input rule on the "server" side for the protocol you are using, e.g. TCP port 443 for SSTP and TCP port 1723 plus protocol 47 (GRE) for PPTP. Of cou...

daras

Hello,

What rules do i need in the firewall to allow communications between the two LANS if i 've an SSTP or PPTP VPN ?

Thanks

daras

Hi,

I sthere a way to export administrator passwords in cleartext view ?

If i use the export command no config for admin user data is exported right ?

If i use the backup method to export my config can i view the user passwords somehow ?

Thanks

daras

i know about map2n, if i make a bridge between the 2 switches on the master ports the LAN speed would be 100Mbps or 1GPs if connect a PC on the gigabit ports of Rb2011 ?

daras

hi,

if i make a bridge on the switches what will be the LAN speed 1gbit or 100Mbps ?

daras

It depends on what you need. If it's simple AP where clients will have unlimited access to LAN, then just bridge the ports and you're done.

For RB2011 you probably don't want bridge, but rather hardware switch, it's faster.

If dont use bridge how can i use the internal Atheros gigabit chip ?

daras

Hello, I want to configure a map2n as an AP for my home network. The map 2n will be connected to my MikroTik RB2011iL-IN in its poe-out port. What is the best way to configure the map 2n ? Make a bridge the LAN/WAN ports and add a dhcp-client to get an ip address from a dhcp server running on the RB...

daras

hi,

i resolved it i forgot to add to dns check remote requests

Thanks for your help

daras

Hi, thanks for your answer. This is exactly what i did but the dhcp server for DNS is giving me the ip address of the modem and not the DNS of the provider network. The ppp client cannot worl of i dont see the usb port correct ?

Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk

daras

How. Ive set up this modem for an RB951 i can see the lte interface but when i try to add a ppp interface no usb port is shown. So i add a dhcp client and i am getting an ip of 192.168.1.x, i create a nat rule for lte interface but i am not getting internet, however i can ping any public address lik...

daras

I believe it is a bug. I 've tried to reboot the router withe modem on the router (RB951Ui-2HnD) but still cannot be recognized.

I downgraded to 6.35.4 and i am able to detect it correctly as lte1

Please try to fix it if it is a bug

Thanks for your help

daras

hi I recently upgraded to version 6.36.2 and i cannot see lte interface.My usb modem is a zte k5008z.

However in the usb resources i can see the device .

How can i troubleshoot this ?

Thanks

Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk

daras

for anyone had this issue the following solution worked for me I rename the file cygwin1.dll to cygwin1.dll.old in the folder C:\Program Files\GNS3\dynamips. Then I performed a copy from cygwin1.dll who is in folder C:\Program Files\GNS3\vpcs toward the folder the folder C:\Program Files\GNS3\dynam...

daras

for anyone had this issue the following solution worked for me I rename the file cygwin1.dll to cygwin1.dll.old in the folder C:\Program Files\GNS3\dynamips. Then I performed a copy from cygwin1.dll who is in folder C:\Program Files\GNS3\vpcs toward the folder the folder C:\Program Files\GNS3\dynami...

daras

Hi, I did an upgrade to GNS version 1.3.13 and when i connect a Virtual PC to switch and try to connect via console i am getting the following error "executing the startup file PC1> goodby. The message says "network error: Software caused connection abort" restart in 5 sec. Has anyone...

daras

Hi, normis I want to simulate a VPN configuration with 2 routers connected through the internet and provide a LAN-to-LAN implementation using different types of VPN's such as L2TP, P2TP iPSEC. Like in the diagram below LAN1---|---------router 1----------(INTERNET CLOUD)-----------router 2----------|...

daras

Hi, Normis

I 've enabled romon in all the routers like in your diagram with the 4 routers but i can only use winbox only to the one which is connected to the cloud.

Do i 've to enable something else for winbox ?

Thanks

daras

We recently released a test version of our upcoming product Cloud Hosted Router (CHR) - a virtual RouterOS instance for the x86_64 architecture. The test version we currently offer has 1mbps limit per interface (in future we will offer unlimited speed with a paid subscription). Otherwise, it's a fu...

daras

Hi,

How can we configure a point-to-point link (not wireless) ?

I think Cisco does the same with ppp connections

daras

Hi, Normis

How can we emulate WAN connections in GNS3 i mean if i connect another Router in the cloud it will get another ip address in the subnet 192.168.137.0 but i want to get an ip address on another subnet say 192.168.135.0 is this possible ?

Thanks

daras

I ve tried to run it on my MAC also but it didn't work My MAC is a MACBOOK late 2007 model and does support only GNS 0.84 vesrion and not the latest one I had also many problems with qemuwrapper I will try to run windows 7 64bit on Paralles i believe this should work without any problems Thanks for...

daras

Hi, Normis

I ve installed Windows 7 64bit and am still getting the following message when i am trying to connect to console

127.0.0.1:2049 network error:connection refused\

But if select to reload the router i am able to login to Mikrotik console.

I

daras

I ve tried to run it on my MAC also but it didn't work My MAC is a MACBOOK late 2007 model and does support only GNS 0.84 vesrion and not the latest one I had also many problems with qemuwrapper I will try to run windows 7 64bit on Paralles i believe this should work without any problems Thanks for ...

daras

I am running windows in my MAC over bootcamp but it only support windows 7 32bit thats why i told you if you can support Windows 7 32bit

daras

So we cannot run this setup on Windows 7 32bit ?

daras

Hi Normis,,

Is it possible to provide a guide on installing GNS3 and QEMU on osx ?

Can we use virtualbox instead of Qemu, is it working properly ?

Thanks

daras

GNS3 with qemu

daras

Hi, Normis

Do you know if the CHR works on Windows 7 32bit ?

daras

yes, winpcap is already installed and working fine. I dont think this is the problem. Thanks I am running windows 7 over bootcamp in my mac, do you think that is the reason for not working properly ? BootCamp is identical to just running on any other PC. So I don't think related to this fact. OK, t...

daras

yes, winpcap is already installed and working fine.

I dont think this is the problem.

Thanks

I am running windows 7 over bootcamp in my mac, do you think that is the reason for not working properly ?

daras

yes, winpcap is already installed and working fine.

I dont think this is the problem.

Thanks

daras

Hi, everybody i cannot make it to work.

When i am trying to connect to the console of the router i am getting the following error

127.0.0.1:2001 network error:connection refused

Am i missing something ?

daras

Hi, everybody i cannot make it to work.

When i am trying to connect to the console of the router i am getting the following error

127.0.0.1:2001 network error:connection refused

Am i missing something ?

daras

hi,

i ve installed gns3 with the guide but when i try to enter the console of my router is says

127.0.0.1:2001 Network error:connection refused

Any idea please ???

daras

Hi,

I 've noticed that its not possible to run netinstall on a Mac, however winbox can run fine as there is a dmg file.

Drag n drop functionality is not supported yet or not ?

Thanks

Search found 40 matches