MikroTik

jroy

Can you tell me what is wrong here? I have been testing and ssh is not allowed at all unless I add the input/accept chain. Flags: X - disabled, I - invalid, D - dynamic 0 ;;; default configuration chain=input action=accept protocol=icmp 1 chain=input action=accept protocol=tcp dst-port=22 2 ;;; defa...

jroy

I have this working. Fails over and back very easily. Even if you have a meanie face Normis doing your support - You Guys Rock!

Thanks MikroTik!

jroy

OK, I have 2 ISP's.

Wan1 = dhcp
Wan2 = pppoe

I want to fail over all traffic from Wan1 to Wan2. What does the firewall Mangle, Nat and route statements look like?

Thanks,

Jerry

jroy

Help Please! I opened a ticket on Thursday the 19th with support[at]mikrotik.com and NO ONE has responded. Only the canned response. I have two 532 routerboards. They both had expired level 3 licenses. I bought new level 4 licenses and applied them. The Brand NEW Licenses says they expired on Aug/01...

jroy

I have several sites that have dynamic IP's and I manage them via PPTP. I want the Dude to be able to test for availability periodically with PPTP and send an e-mail or page if site is down. Can The Dude do this? I do not see PPTP as a protocol choice.

Thanks,

Jerry Roy

jroy

Make sure the flash module hasn't worked free of the socket far enough to not make a connection. If that isn't it, then it sounds like the flash has gone bad. You'll have to buy a new flash and relicense the board.

I have replaced flash, still same issue. Any other ideas?

jroy

Is there a Problem with HotSpot???? I have had this happen to me 2 times now. I have a hotspot configured and the Ether1 IP address is assigned dynamically from the ISP. It all works well but customer wants static IP for management. I convert circuit to static IP address and HotSpot redirection to a...

jroy

This would be a great program. Let me know when it is available. I have a great need for something like this.

Jerry Roy
jroy_at_goremote.com

jroy

I need you guys to add a checkbox somewhere to allow me to use an external login webpage. It should have a checkbox that says "redirect http/https login to external server?" and a form field that allows me to insert the http://some.login-site.com url.

Thanks

jroy

Hi, Where in the manual did you find this? I want to transparently Redirect ANY login request to HotSpot to External website login page. I use airpath as the login / accounting provider and I need this to be totally transparent to user. So the airpath page should be the login page, not the MikroTik ...

jroy

tully, What are the chances that we can run nstreme2 between 2 or more ap's, have wds running on one as master and other as slave, have them mesh and have a hotspot that uses the airpath login page as its main login page? Clients should be able to connect to either AP as a client of the hotspot and ...

jroy

You have any plans to support mesh routing protocols like DSDV and DSR?

http://peertech.org/WirelessMeshRoutingProtocols

jroy

With all these custom Firewall rules we can create, does the unit have the ability then to redirect to another companies login page like airpath instead of its own Hotspot Login Page??

jroy

AGAIN,

WHERE DO YOU SET THE USERNAME AND PASSWORD FOR THE SMTP SERVER????

jroy

Normis, Did I rub you the wrong way? The link you sent says, and I quote: MAC telnet is used to provide access to a router that has no IP address set. It works just like IP telnet. MAC telnet is possible between two MikroTik RouterOS routers only. So How is this supposed to help me if it is between ...

jroy

http://www.mikrotik.com/docs/ros/2.8/ip/ipsec.main.8.3

Eugene

This is what I get HTTP Status 404 - /docs/

--------------------------------------------------------------------------------

type Status report

message /docs/

description The requested resource (/docs/) is not available.

jroy

You don't have to do system reset, just start removing all thing that you don't need. System reset is the easy way. What you suggested did not work. I did this AT LEAST 6 times. I went thru the config with a fine tooth comb. I even had another MT guy do it and no matter what we did, after a "H...

jroy

---------- :local ip /ip address{ :foreach i in [find dynamic=yes] do={:set ip [get $i address]} /tool e-mail send to=someone@somewhere body=(" Dynamic IP found:" . $ip) } ----------- So where are the username and password settings? I have only smtp servers that require authentication. I ...

jroy

All, It is really lame that you can have an MT on top of a 100 foot pole and after you have manually wiped the unit's settings by going into each screen (fw, Hotspot, Universal, Etc...), the Hotspot setup refuses to configure the unit correctly. Then the only fix is a "system reset" and gu...

jroy

Hi all,

Any have an example of a Mikrotik as IPSec client to Cisco 3030 Concentrator? The MT gets its wan IP dynamically and the 3030 has a static address.

Thanks,

Jerry

jroy

You have a Script to send Dynamic IP address to me in E-mail via an smtp server that requires authentication?

jroy

Draw a picture and send it up and I will give you answer

jroy at goremote dot com

jroy

Hello support@mikrotik.com,

Based on This - http://www.mt.lv/Documentation/HowTo.html#How_wdsbridge

1) can I have clients connect to [Main-AP]?

jroy

All, I need a wds design - sounds like maybe a few of you have done this succesfully. I have a Routerboard 230 with 3 radios and 3 9 dBi 120 degree antennas. It has hotspot working and is natting. I added a wds interface and bound it to one of the radios. I want to add a wds-slave about 600 feet awa...

jroy

I just finished a project with MT as "Router on a stick" for Vlans. Worked great. I have 25 Vlans and 25 subnets and they all work great. My question to you is how are you doing the bridging? It looks like your able to create the Vlans and associate them to the wlan cards. Just not sure ho...

jroy

This WORKS!

Now - I need to prevent each VLAN/Subnet from accessing each other VLAN/Subnet and only allow each to get an IP address from the DHCP server (MikroTik) and get out to the internet.

How would you accomplish this? Firewall rules?

Thanks,

Jerry

jroy

Can this work? Is there an example?

jroy

- You must set up the uplink port as a member of both vlans. - Done! - The ports must be asigned to the seperate vlans. You mean on the switch? VLAN1 is ports 1,2 and 25 (25 is the uplink) VLAN2 is ports 3,4 and 25 (Again 25 is the uplink to the MT) - Create the VLan(s) on the MikroTik and specify t...

jroy

Can I have the Mikrotik work with my Dell switch and act as a router on a stick? I have a DELL switch with an uplink port plugged into the Ether1 port of the MT and it is configured with 2 VLAN's - VLAN1 and VLAN2. I have created 2 VLAN's on the MT. Can I have the ETHER1 on the MT talk on 2 differnt...

jroy

I have a hub and spoke VPN design. I have a MT RouterBoard at the spoke side. It gets its IP from the cable provider Via DHCP. Anyone know where in RouterOS to set the unique Identifier for the VPN tunnel to work? You can use the following setting: generate-policy (yes | no; default: no) - allow th...

jroy

Does MT support Multiple DHCP Scopes and Multiple IP's on the LAN interface?

jroy

Question, John Tully - MT support - Does MT work in Aggresive Mode?

If not I will just stop trying.

Thanks,

Jerry

jroy

I have a hub and spoke VPN design. I have a MT RouterBoard at the spoke side. It gets its IP from the cable provider Via DHCP. Anyone set this up before? I set to aggresive mode and have all necessary parameters to talk to the sonicwall but I need a unique ID to talk to the sonicawall since the rout...

Search found 33 matches

Re: Block connections from IP address when many attempts mad

Re: Multi-Homed or Not - That is the question

Re: Multi-Homed or Not - That is the question

support@mikrotik.com response time?????

Can the Dude be configured to monitor PPTP locations?

Problem with HotSpot????

WOW!

Allow an external login page be my main login page

where in the manual?

nstreme2 and wds

Any plans to support Mesh Routing Protocols?

hotspot login page http redirect????

Again

Did I rub you the wrong way?

This Did not work.

Where are the username and password settings?

Set a Default IP on the unit after a reset.

Mikrotik as IPSec client to Cisco 3030 Concentrator?

Script to send Dynamic IP address to me in E-mail?

Draw a picture and send it up and I will give you answer

WDS answers please

WDS design help

I just finished a project with MT as "Router on a stick

Router on a Stick (VLAN's)

Does MikroTik have an Answer to my question?

Router on a Stick w/dhcp server per vlan

Router on a Stick (VLAN's)

Re: IPSec tunnel to SonicWall

Multiple DHCP Scopes

VPN Aggresive mode does not work?

IPSec tunnel to SonicWall