MikroTik

miltont

Greetings
I purchased this unit WITH R11e-LTE-US

The first thing i want to know how to insert the sim card?
I tried all different types on insertion methods and wont stay in the rail or cage....???

miltont

Greetings Installed VMWARE 6.7 and downloaded the VMK CHR File from Mikrotik Created corresponding Virtual Switches and assigned the 10gbe Adapter. 1 PORT connected to a 10gbe port on CCR1072 Tested from CHR to a Local CCR1072 i got 9 gbps All ports have the forced speed to 1gb or 10gb. I'm interest...

miltont

All ports have the forced speed to 1gb or 10gb.

Good Evening !

retry it again, but this time also deactivate Auto-Negotiation on the hyper-V

miltont

Good Morning,

I would try to deactivate Auto-Negotiation on the SFP+ interface.
Testing every Speed manually (1, 2.5, 5 & 10 Gbits)

Nope, i manually tested 100mbps, 1GB and 10Gb and had same incomplete and unknown status!

miltont

Greetings How do you managed to get the CHR Interface recognize 10GB speed on the HYPERV? I installed 1 Intel X540 dual 10GB PCIx card and when i bandwidth test it only reaches to almost 500Mbps and 300Mbps from CHR to other Mikrotiks that i have with 10Gb Connectivity I have attached print screens ...

miltont

Greetings How do you managed to get the CHR Interface recognize 10GB speed on the HYPERV? I installed 1 Intel X540 dual 10GB PCIx card and when i bandwidth test it only reaches to almost 500Mbps and 300Mbps from CHR to other Mikrotiks that i have with 10Gb Connectivity I have attached print screens ...

miltont

Greetings
I want to know what would be the cause that i see TX/RX Drops
this occurs on all pppoe users on a particular site.

miltont

thanks for the info

This has been confirmed as a bug in emails from Mikrotik support.

It will be fixed in v7.

miltont

Greetings

How can i see my internal routes when i have BGP enabled on the main router?
When i go to IP/Routes i see a message that there are too many routes too show them all...

miltont

Selling working equipment.

All items are not in original box and may not contain all accesories.

Mikrotik LOT $65 + $20 Shipping to ANY US Territory via USPS Priority Mail with Insurance

(1) RB750GL

(2) HAP AC LITE

miltont

Is it allowed here on the forum to sell equipment?
I have a couple of mikrotiks that want to sell....

miltont

Up 60+ Days

miltont

Removed the ones and ran the export again add action=accept chain=input comment=\ "defconf: accept established,related,untracked" connection-state=\ established,related,untracked add action=drop chain=input comment="defconf: drop invalid" connection-state=\ invalid log=yes add ac...

miltont

add action=accept chain=input dst-port=8282 protocol=tcp add action=accept chain=input comment=\ "defconf: accept established,related,untracked" connection-state=\ established,related,untracked add action=drop chain=input comment="defconf: drop invalid" connection-state=\ invalid...

miltont

I gave up, on the winbox, but i needed also to permit port 8282 to access DVR, i created the forward and also DST NAT from public to private ip
and still shows it as filtered and not open if i scan via a online scan port website....

FW-RB2.jpg

FW-RB.jpg

miltont

Greetings I have 1 RouterBOARD 962UiGS-5HacT2HnT with Firmware 6.45.1 With Default Settings, i have 1 public ip address assigned on my PPPOE Session, i want to be able to connect via WINBOX to it. Its enabled on Services port 8291, but im not able to connect with my laptop using Mobile ATT , IS ther...

miltont

Im also having this issue in 1 of the servers that i have in my network, i verified the server and the NIC Card was @100MB Speed, and i didnt noticed it, everytime i speedtested my DIA of 500Mbps will result with 96Mbps of Download and Upload. I changed the network adapter to a 1GB and now i speedte...

miltont

ip route from 10.20.0.1 MIKROTIK 8 ADC 10.20.0.0/24 10.20.0.1 bridge1 0 18 A S 10.20.1.0/24 10.20.0.126 1 19 A S 10.20.2.0/24 10.20.0.67 1 21 A S 10.20.4.0/24 10.20.0.126 1 22 A S 10.20.5.0/24 10.20.0.126 1 ip route from 10.20.1.1 MIKROTIK 0 ADS 0.0.0.0/0 10.20.0.1 1 27 A S 10.20.2.0/24 10.20.0.1 1 ...

miltont

Diagram

Network Diagram 2019.jpg

miltont

Greetings I have an issue reaching a new subnet 10.20.5.0/24 from the other networks 10.20.1.0/24 and 10.20.0.0/24 I dont have issues if i go to the mikrotik 10.20.5.1 and ping 10.20.1.1 succesfully and 10.20.0.1 succesfully. But if i go to mikrotik 10.20.1.1 and ping 10.20.5.1 i get a reply from 10...

miltont

Greetings I have the following situation: Im testing a new PTP from a new Remote Site (10.20.2.x Subnet) Connection from Primary Site (10.20.0.x Subnet) where i have a 500Mb Dedicated Fiber Connection Remote Site has RB3011 Router (10.20.2.1) Primary Site has CCR1072-1G-8S+ (10.20.1.1) If i test PTP...

miltont

Greetings I need to achieve DST Nat to 10.20.1.46 port 8282 Default Gateway 10.20.1.1 Client has Mikrotik RB 10.20.1.1 RB4011 Model connects to thru PTP Connection to 10.20.0.1 that has Public Interface 24.139.x.x (Public IP) Do i have to create DST NAT Rules on the 3 Mikrotiks? What would be the or...

miltont

Yesterday we installed 1 New Link using the 60Ghz PTP Radios
Strange thing is the date it states its November and we still in October

This is the results:

PTP60Ghz.jpg

miltont

Greetings

Can this model be a router CRS212-1G-10S-1S+IN ??
It says Cloud Router Switch on descriptions and its classified on website as a switch....

I just need to have Routing/Firewall/PPPOE/Switch Capabilities

miltont

Greetings
Does someone have this radios on a 2500 meter distance?
What is the bandwidth of link?

miltont

Greetings I only added 1 RADIUS Server (10.20.0.65) I added similar configuration from 10.20.0.1 router to the 10.20.2.1 router The RADIUS server generally needs to have the NAS IP configured, you probably added the IP of your first NAS but not the second one. The default for most RADIUS servers is ...

miltont

I can ping ok, so the route to each network is ok, regarding firewall rules i dont have any deployed in each network since im testing...

miltont

Greetings Im currently adding a new Ip subnet on my network, My Primary subnet 10.20.0.x has a Mikrotik Router its ip is 10.20.0.1 In this network i have a RADIUS Server (10.20.0.65) and it works fine when im on the same network subnet. I have 12 Devices using PPPOE authentication. Now, i added this...

miltont

I tried to auto update, it connects but does not complete the download, i see that it creates a file on the repository but then its auto deleted and the memory gets almost full on the router.... I also tried uploading it manually to the router it copies the file but i dont have an option to upgrade ...

miltont

Greetings I wanted to know how can i make a backup route of all internet traffic on my mikrotik... Currently i have a 3011 Router with ETH1 port fiber connection as my default connection and has a static public IP. I want to use ETH9 port as backup(Failover) connection it has a cable modem connectio...

miltont

yes its needed.

So i wont need to add routers or a router to route the traffic from those 2 Networks 192.168.2.x and 192.168.3.x ??

Or it should be sufficient just adding manually or to the dhcp options my router 192.168.1.1 ???

miltont

i thought i could use my current router 192.168.1.1 to do all routing from networks 192.168.2.x & 192.168.3.x with just setting the subnet mask to /22 I was going to change on the router local network interface from 192.168.1.1/24 to 192.168.1.1/22 Also going to change the Ip/Subnet on the curre...

miltont

yes, thats whats planned, using 192.168.1.x subnet for servers
192.168.2.x subnet for Pcs and virtual Pcs/Servers and 192.168.3.x subent for Wifi and other devices.
thanks

miltont

Greetings Current network needs to be bigger I need little help, i need to upgrade from a 192.168.1.0/24 network to a 192.168.1.0/22 So i can have 192.168.2.0/24 and 192.168.3.0/24 networks for additional virtual machines and physical machines I wanted this networks scopes for DHCP Leases.. Default ...

miltont

that did the trick
thanks

miltont

attached pic

miltont

so i just disable ARP on my bride interface?
Currently is enabled

In my wan interface where i connect to VPN its enabled as PROXY ARP

miltont

Greetings
I configured VPN to my mikrotik, i connect but i can only see mikrotik, but im unable to see other devices that are connected to the network,
10.20.x.x ....

What is missing so i can connect to and see devices on the same network?

miltont

Greetings
I would like to get a report usage application
that monitors bandwidth usage from an Ip Pool that i have on my mikrotik.
I would appreciate any help on this

thanks

miltont

Greetings I need to publish a port 37777 to access a private device thru internet. Private device has an Ip 10.20.1.224 it is connected thru a mikrotik that has the network segment 10.20.1.x This network is connected thru PTP connection to another network 10.20.0.x where it has the Internet connecti...

miltont

Yeap that did the trick!
Thanks

On router 1, isn't your static route incorrect? The one going to dst address 10.20.1.0/24. It is set for gateway ether2-PTP-Canabonsito but I think you want the gateway there to be 10.20.0.83 instead. It needs to know the next hop address and you are not supplying it.

miltont

I attached Router 2 It sounds like you are missing either static routes or a routing protocol. How are you routing between the two networks? For only two networks there is not much point in using a routing protocol, but if you want to you can. Static routes may be easier. (I was responding to the or...

miltont

I attached router 1 config screen It sounds like you are missing either static routes or a routing protocol. How are you routing between the two networks? For only two networks there is not much point in using a routing protocol, but if you want to you can. Static routes may be easier. (I was respon...

miltont

Greetings I have 2 Mikrotik routers and i want to reach and see connected devices in both networks 1st Mikrotik is on the network 10.20.0.0/24 It has assigned 10.20.0.1/24 Ip 2nd Mikrotik is on the network 10.20.1.0/24 It has assigned 10.20.1.1/24 Ip Both Networks are connected via a PTP Bridge Conn...

miltont

so how i could do that?
create a new pool and ??

miltont

so how isp share the ip that a modem has assigned
to our router?

miltont

Greetings I have a question regarding DHCP, i have a pool of IPs assigned to Wireless Devices (ubiquiti devices) this are in bridge mode, and those devices are connected to a router. The thing is that i get assigned 2 Ips from the pool, 1 for the ubiquiti and 1 for the router.... How can i reuse the...

miltont

thanks for all responses
So this model does not have the option to power up a POE.....

Which one of the other routers does have this option?

miltont

Greetings
I have a RB3011UiAS and i want to use the last port to provide power to a Ubiquiti Cloud Key
how do i enable this port to power on the device?

miltont

thanks for the help borisk!

If should use right routes:
/ip route add dst-address=172.16.1.0/24 gateway=ip of router2 Wan on first router
/ip route add dst-address=10.20.0.0/24 gateway=ip of router1 on second

Of course if you are not using nat.

Regards, Boris

miltont

I also want to make a point to point wireless connection
how do i route networks traffic from both sides?
assuming that i have router 1 with local network 10.20.0.0/24
and router 2 with local network 172.16.1.0/24
Point to Point devices will be connected on ETH2 of each router

miltont

Greetings I have a RB3011 router and my Upstream Provider gave me (1) /30 Public IP that was assigned to the interface, they also gave me /27 Block that i want to use it for wireless devices, how do i define the route of this /27 block on the mikrotik? example /30 Assigned to ETH0 Ip:192.168.1.94/30...

miltont

[admin@RB3011-CORE-GURABO] > export # jul/01/2016 19:40:44 by RouterOS 6.36rc33 # software id = JZBD-W5HV # /interface bridge add admin-mac=D4:CA:6D:3F:D6:E8 auto-mac=no comment=defconf name=bridge /interface ethernet set [ find default-name=ether2 ] name=LAN-ETH2 set [ find default-name=ether3...

miltont

attached is one configuration

miltont

Greetings I purchased this router, and wanted to do this configuration: ETH1 = WAN ISP ETH2= WAN ISP Backup ETH3= WIRELESS SECTOR1 IP 10.20.0.3 ETH4= WIRELESS SECTOR2 IP 10.20.0.4 ETH5= WIRELESS SECTOR3 IP 10.20.0.5 ETH6= PTZ CAM IP 10.20.0.6 MIKRTIK LOCAL IP 10.20.0.1 this also is the DHCP Server...

miltont

Thanks for all the help guys!

I will connect a Access Point in the interface 8 and i want to assign the same ip address (NAT/BRIDGE)??

I also want to relay DHCP Services i already created DHCP Pool and assigned it to that interface so WIFI Clients
get ip addresses from the pool....

miltont

Greetings
I assigned the following Ip address 10.20.0.4 to interface 8
I want to assign this ip address to a computer that im connecting to this interface
what needs to be accomplished to do this?

miltont

Greetings The modem is already in bridge mode, because it works fine on the netgear.... The mikrotik has DHCP CLient... about the PPPoE how do i check it? You need to put the Cable modem in bridge mode (google it for your telco provider/cable modem model), then use either DHCP or PPPoE from the mikr...

miltont

Greetings I have a Cable Modem that i want to connect to a new mikrotik RB750. I want to assign my dynamic public ip address to my Ethernet1 Interface (WAN Interface), it only gets 192.168.0.3 assigned via DHCP Client. How can i assign that dynamic public ip on the mikrotik? If i connect my cable mo...

Search found 59 matches