MikroTik

cpelect

use NetInstall to reinstall RouterOS... Yeah, figured out how to do that and it is working once more with version 4.6 running on it. As a side note, when I tried putting 5.0Beta2 on it with the NetInstall utility the BIOS would keep saying that the disk was full and the install would fail. I find t...

cpelect

Ok, got some better results with the new cable. This is what I get in HyperTerminal now when I boot the RB1000: RouterBOOT booter 2.20 RouterBoard 1000 CPU frequency: 1333 MHz Memory size: 512 MB Press any key within 2 seconds to enter setup.. loading kernel from nand... OK setting up elf image... I...

cpelect

Ok, when I boot the RB1000 with the serial cable connected and HyperTerminal open the only thing I get in the display is:

ö╫ö

Probably meaningless I'm guessing. It could be the cable I'm using, I'll be trying to find a proper com1 cable today. The one I have I must use adapters to get it to fit.

cpelect

Tried a serial cable connection and I get nothing. HyperTerminal says it is connected but it doesn't display anything.

cpelect

Tried installing this on an RB1000 I had in the shop. It was using 4.6 and tried upgrading it to the 5.0Beta2 to see what it was like. The RB1000 no longer boots now. Lights come on and the unit powers up but I get no POST beeps or anything. The blue and green lights are on and I can see the activit...

cpelect

Is there are way to default the MT OS back to something like factory defaults? Or configuration with nothing configured or assigned and just log into it with the WinBox and start again?

cpelect

I'm using an RB1000 with OS version 3.28 I'm finding that I periodically have to reboot the router to regain access to certain websites. For example, our mail domain becomes unavailable for no reason that I can see. The error that Firefox comes up with when I try to use our webmail service is "...

cpelect

We've been using Mikrotik for a while now for hotspot services for our customers. One thing I've been noticing is that in our database that keeps track of the accounting data that there are nearly duplicate rows like this: AcctStartTime || AcctStopTime || Upload (MiB) || Download (MiB) 2007-12-02 03...

cpelect

Thanks, I totally missed that in the manual. Didn't think too look under interfaces.

~Sean

cpelect

Is it possible for a Mikrotik Router to function as a PPPoE client to another Mikrotik box functioning as a PPPoE server? If so, where can I find this information?

~Sean

cpelect

At least this will provide good informtion on how to trouble shoot these types of problems in the future. We appreiciated your assistance and thank you again for your time.
Jay and Sean

cpelect

I think the problem has been found, namely the laptop I was using as a test machine. I tried out the test account on two other machines and it works without any problems. Thanks for all the help you offered.

~Sean

cpelect

Ok, I think I have the information you are looking for. rad_recv: Access-Request packet from host 64.114.71.1:34511, id=96, length=198 NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00:1B:24:37:92:BC" Called-Station-Id = "server1" NAS-Port-Id = "ether4" User-Name...

cpelect

Yes, Accept/Reject works fine. The test account is able to log in and surf the internet just fine. The issue is when attempting to download a file. I checked the radiusd.conf file and I don't see any entries for the xlat module. I'm using this radiusd.conf I found on the Mikrotik wiki on my Radius s...

cpelect

Ok, this is what the Radius Server sees when the test account logs in. rad_recv: Accounting-Request packet from host 64.114.71.1:34381, id=69, length=144 Acct-Status-Type = Start NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00:19:7E:70:B0:90" Called-Station-Id = "server1"...

cpelect

In Hotspot you can create user profiles. Would it be possible to create two different profiles, one called Home and one called Business and each have their own rate limits. Then by using Radius be able to have it so that when a user logs in they will be forced to use one of these profiles? For examp...

cpelect

Not having much luck. Everything I've tried to limit a user's connection doesn't seem to work. If the user logs they can surf the web just fine. Yet as soon as they attempt to download a file or run a bandwidth test the server appears to just reset the connection. But if they try to surf the web aga...

cpelect

Is then posible to make profiles for different plans? Or will this change be accross the board? If so how do we apply those changes?
Thank you Jay

cpelect

How can you rate limit a Hotspot using a radius server. Need to know the Key Word and what table/tables that we would have enter the information into.
Thanks>>>>>>

cpelect

We were able to setup NetWatch on our head end router just fine, but when we tried to set up another NetWatch on a router further in on the system it won't work. The only error I get in the log is: Error sending e-mail: error talking to server I can open a telnet session though and create and send a...

cpelect

I'm looking to make a script that would automatically log out any active users for both the Hotspot and PPPoE connections we are running on our MT boxes. This is needed to force a stop accounting packet to our Radius server for month end user accounting.

~Sean

cpelect

I was able to build a queue for WoW using these rules. Mangle: ;;; WoW Packet Mark chain=forward connection-mark=user-wow action=mark-packet new-packet-mark=wow passthrough=no chain=forward protocol=tcp src-port=1024-65535 dst-port=3724 action=mark-connection new-connection-mark=user-wow passthrough...

cpelect

I have an MT box that has a DHCP server, Hotspot server and a PPPoE server enabled. The reason for this is we want normal customers that don't require a routable address to use DHCP and the Hotspot to log into the system. For customers who require a routable address they will log onto the system usi...

cpelect

I'm looking for a simple way to disable the WebBox access to our MT boxes from the outside world. Is there an easy way to do this in the firewall filter or some other setting?

~Sean

cpelect

I think I may have found the problem. It looks like the hotspot server may have been the culprit. After disabling it the problem seems to have cleared up.

cpelect

Nope, even with this rule added I still couldn't get to either google.ca or yahoo.com this morning from the shop computer. Any other suggestions?

cpelect

You can do this just fine, what you need to do is assign a gateway address to the interface that would match the ip address range that you're using for your dhcp server. For instance: DHCP Pool: 10.10.10.2-10.10.10.254 Gateway set to interface the dhcp server is running on: 10.10.10.1 This is what I...

cpelect

I think I may have found the answer, the system has been running today without incident. This is the code I found: / ip firewall mangle add chain=prerouting in-interface=WAN action=change-ttl new-ttl=set:65 comment="TTL FIX" disabled=no add chain=forward protocol=tcp tcp-flags=syn action=c...

cpelect

I have some more information that might help. When these sites are unable to be reached I've tried a few things. They lynx browser under Mandrake Linux returns an error: HTTP/1.1 301 Permanently Moved. I've used nslookup under Windows to get an IP for yahoo.com and have tried entering that directly ...

cpelect

I have a MT router set up on a fiber pipe. It is managing the class c block of addresses that our ISP assigned to us for customer use. We also have 3 masquerade NAT's running (might be getting rid of 3 of them soon). The problem we're having is after a while, 2 to 4 hours roughly, various customers ...

cpelect

/ ip firewall service-port set gre disabled=no set pptp disabled=no Thanks for that. I'll log into my router and verify that I don't have these set to disabled. Edit: I checked those settings and I did have them on disabled. For the other item you mention, about protocol 47 (gre), what would be a g...

cpelect

I'm not sure what type of VPN they are, be it PPTP or L2TP. I'm unfamiliar with what the NAT helpers are in MT, if you could clarify this for me? All I do know about these VPN is that one client has a software VPN client to Jhonson & Jhonson and it worked. Another client is using a different sof...

cpelect

Yes, I have several firewall rules but nothing stands out that might be the culprit for blocking this traffic. Would you like for me to post them?

cpelect

I need to know this: Does Microtik’s NAT handle passing a VPN tunnel through it? I have several clients that are dependant on this to work and I have had little success with this. I’ve been using a 1-to1 NAT to try and get it to work. I had it working with a software VPN but when I tried again with ...

cpelect

I was able to make some progress with this. I used the PCQ guide in the manual to set up some basic rules for mangle and queuing. What I want to be able to do is use mangle to monitor the type of packets going through the hotspot and use PCQ to limit these packets in the queue. For things like torre...

cpelect

Anybody?

cpelect

I've been using the Mangle rules that were posted on the Microtik wiki site and I think I have them set up properly for use with the hotspot, except that I it doesn't seem to show usage for downloading from the internet. I assumed that it would show up in HTTP traffic, but it doesn't. Is there a Man...

cpelect

Been playing around with PCQ and ways to limit download/upload for hotspot. What I've found is that clients who would log into the hotspot do not get the PCQ rules applied to them. I then found a way to limit through the hotspot but it is only a global limit. What I want to do is be able to limit tr...

cpelect

One client is a VPN client, the other is a VPN server I believe.

cpelect

I tried your suggestion and I think that may be the right approach but I still can't get it to work. Would I be able to get some clarification of this line in the manual in the /ip hotspot ip-bindings menu? to-address (IP address; default: "") - IP address to translate the original client ...

cpelect

I have a hotspot controller setup servicing our clients. But two of them have a VPN that they must have work to continue their business. Their addresses were originally set up on our public routable addresses. The problem I'm having is that I've setup the MT box on one of these routable addresses an...

cpelect

Is there a way to use MT to reserve IP addresses? We have had a pipe provider issue us a class C address range to use for our servers that we will be setting up. What we want to be able to do is reserve these addresses so that nobody else can use (pirate) them. I had a co-worker suggest that I just ...

cpelect

Hrm, I think I have this figured out. I can see the router receiving the packets and passing them along but I'm not getting a response back from the radio on the other side. I've also noticed that I am unable to use the ping utility in the MT box to ping the radios. I know they are pingable. On the ...

cpelect

Ok, I found out what I need to do to get this to work. What I need to do is use port forwarding so that when I type 10.10.0.253:8080 (MT box address) in my web browser the router will then forward that address to 10.10.10.2:80 (radio address). Would anyone be able to explain how I would go about set...

cpelect

I have masquerade set up for the local network side of thing so clients on the local side can get out on the network. What kind of NAT rule would I add so that the public side can see the local side of the network?

~Sean

cpelect

I've been playing around with an MT box for a while. I set up a small test network to play around with routing and NAT. What I had was a box set up with 2 ethernet cards and a computer set up on each card. Each ethernet card was given a different network address. Ether 1 was given 10.10.0.0/24 and e...

cpelect

I read that article for the IPv4 stuff and some of it seemed to make sense. Everything except the part about the Next Hop component. Nowhere in the MT router setup do I see where to specify the Next Hop. I've been banging my head on the desk all week trying to figure this out with little progress. I...

cpelect

Would I use the /ip routes menu or would this be done in /routing RIP/OSPF/BGP? I am not familiar with how to set up a route like this. The only routes I have in my MT box right now were created automatically by MT when I set the box up.

~Sean

cpelect

Well, I'm still learning this stuff as I go along. But NAT just seemed to make the most sense at the time. Is there another method I might want to persue? VPN/IPSec?

~Sean

cpelect

Having a bit of trouble trying to log into the client radios on our wireless network behind the MT router. What I have is the MT router set up on 10.10.0.253 on ether1 to get out to the rest of the network, clients are on a DHCP network behind the router using a 10.10.10.0/24 addressing scheme on et...

Search found 50 matches

Re: MikroTik RouterOS version 5.0beta2 released!

Re: MikroTik RouterOS version 5.0beta2 released!

Re: MikroTik RouterOS version 5.0beta2 released!

Re: MikroTik RouterOS version 5.0beta2 released!

Re: MikroTik RouterOS version 5.0beta2 released!

Default the MT OS?

Can't browse to some pages until router reboot.

Possible MT bug or Radius bug?

Re: Mikrotik at PPPoE client.

Mikrotik at PPPoE client.

Re: Hotspot user profiles and freeradius server.

Re: Hotspot user profiles and freeradius server.

Re: Hotspot user profiles and freeradius server.

Re: Hotspot user profiles and freeradius server.

Re: Hotspot user profiles and freeradius server.

Re: Hotspot user profiles and freeradius server.

Re: Hotspot user profiles and freeradius server.

Re: Hotspot user profiles and freeradius server.

Hotspot user profiles and freeradius server.

NetWatch mail trouble.

Force user logout.

Re: Mangling WoW port 3724

Hotspot, PPPoE, Routable Address problems.

Close WebBox Access

Bizzare Problem...

VPN and NAT

Help with Mangle

Hotspot and Queues

Hotspot and IP pass through.

Reserving IP addresses.

Routing Problem?

NAT problems.