Johan, I've had similar problems as you've had. Tested at 2M and throughput was around 45-50mbps. Similar type of setup with 2 Intel-based servers just doing a b/w test with the newest betas....

Well, I got it working :) The problem was not my logic or syntaxes or anything like that. Rather, it was the fact that I had an inturrupt problem with my wireless card and my ethernet card. Resolved that and the system worked like a charm. Just FYI, this is a pretty useful setup because, unlike the ...

Ok, so here's the update... I got frustrated with trying to get this to work in MikroTik so I tried to see if it would work using other OSes. Using *OS, I got the entire thing to work, exactly as I outlined here without any problems. I want to use MikroTik and I think it's just some kind of problem ...

Whoops, sorry for the mess-up... I've been working on things so long that my mind was turning to gelly... Anyways, here's the correction: The PC should have been: IP address: 192.168.0.202 Subnet mask: 255.255.255.252 Default GW: 192.168.0.201 This hooks up to the station via the same subnet: IP add...

Hi everyone, So I'm working on building an internal routed network and can just about get the thing going, save for 1 problem: I can't ping my default gateway. I'll layout what I've done and look for suggestions as to the solution (I'm sure it's simple and I'm just missing something obvious)... I've...

I've been trying to setup 2 systems to pass data to one another but haven't had any success whatsoever... If someone has any suggestions, they'd be greatly appreciated. Here's where things stand... Right now I'd be happy to hit my router (not Mikrotik router) at 192.168.0.1. System 1 has no problem ...