Hi, I'm using Dude version 7.16.1 and have added a device to the system, including the username (admin) and password for authentication. I also selected RouterOS for the device type. However, it’s unable to connect to the MikroTik router to retrieve information, even though I can log in without issu...

Hi,

I've the dude 7.16.1 and tried uploading images to the "/dude/files/default/images" but won't take as it says "read only".

Is there a way to add images to new devices created?

Thanks,

Pipa

Hi,

This router has been discontinued by Mikrotik. Is there a risk with having one? would MIikrotik still be proving firmware upgrades, etc for these units?

Kind Regards,
Pipa

Hi There,

I want to setup a site to site setup with OVPN connecting two mikrotik routers on different public IPs.

Is there good tutorial for this and one that works?

Your help much appreciated.

Kind Regards,

Pablo

HI,

I've added and still the same.

Would there be anything else that probably need adding.

Kind Regards,

Pipa

Hi There, I have setup OVPN on my mirkotk router and setup OPENVPN on my PC. I can connect to the OVPN server from the PC on the OVPN network of 192.168.20.0.24 and no issue. But, I can ping or access any equipment on the LAN network on 192.168.3.0/24. Is there a way that I can fix this? Kind Regard...

Hi Guys, When you do a Netinstall to a MT router. Are you supposed be able to ping from your laptop to the PXE ethernet enabled setting from netinstall? I cant ping it on mine and the router is failing to see an ethernet connected . Im netinstalling a MT 2011(10 port router) and connected on port 1 ...

Hi Guys, I have a RB951Ui-2HnD which is stuck in a loop after upgrading to 6.49v. I tried all forms of resettings(power off then reset & wait for the beep) but nothing works. I tried Netinstall over ethernet and some issue, The unit won't load as the ethernet ports keeps going up/down intermitte...

Hi Guys, I've setup a PPTP site to site and the link is currently working. I can telnet & ssh from the server side to the remote site(using winbox tools from the server), but I can't ssh or winbox when connected on the server network. Remote IP:192.168.11.1/24 Server LAN network IP: 192.168.4.1/...

Hi There,

Is there way to setup a set of trusted external IPs on the router and block everything else coming into the router(external IPS trying to connect?

If possible, can you advise what commands to perform for this and how it works.

Regards,

Pipa

Hi Muqatil, I don't have BGP setup on the router, except for the defaults one that is currently there(Name: Default - AS:65530). Would this be just connections running in the background from an application?? I have Kodi server setup on one PC and that one PC is always on....I don't know if that is r...

That worked fine. Thanks for the help:-)

Hi There, When I looked through the logs, I can see some lines saying "TCP connection established from x.x.x.x address" but nothing else after or other comments. Does this mean someone looged into the router somehow knowing the username & password? Or this is just someone trying to log...

Hi There, I'm wanting to block a list of 6x Public IP addresses from connecting to the router. Is there a way to add a list with all the addresses that need to block? rather than doing individual blocks per each address on the firewall. If possible, can you list the command lines? Much appreciated. ...

Hi Sob,

Please correct me, if I'm wrong, do you mean something like this : "chain=input action=accept src-address=192.168.10.0/29 dst-address=192.168.4.0/24 in-interface= log=no log-prefix="

I appreciate your help.

Regards,

Pipa.

Hi There, I have a DHCP home network(192.168.4.0/24) along with VPN setup to get to my router remotely(192.168.10.10). I have no issues connecting to the router and also connecting to some of the devices internally by other protocols and I can also ping all devices when connected to the HomeLAN. The...

Hi There,
The vpn config is "pptp"
Regards,
Pipa

Hi There, I've been trying different configs to consolidate two networks and VPN, so I can access everything when working between the two and remotely. Haven't had much success setting it and I was wondering if anyone had a simple way with good results:-) My networks over one router. Network 1 - 192...

Hi There.

I've tried upgrading from 6.37 to 6.37rc5 versions, but from some reason the system won't upgrade after a reboot. Or if someone can tell me what's the proper procedure to upgrade to a RC version from 6.37.

Thanks,

Pipa

Hi There, I've upgraded from Dude version 6.36 to 6.37 and noticed that the equipment status flag(Green, red & Blue) from the left contents is actually no displaying anymore on 6.37 version. Is this an issue wit this 6.37 version or is this something that can be simply turn on somewhere in the s...

Hi There,

We have several MT routers running over the Dude 6.36 and we are wanting to change all the router passwords. Is it possible to do it via Dude? if yes, what would be required?

Thanks,

Pipa

Hi There, We run our customers on pptp session for remote access from our core MT router and we are wanting to push scrip to all those connected. We would also like to do other things like changing admin passwords or change settings remotely to all of them at once instead of login into each single o...

Thanks. I've added the a proper license for it and now is fully upgraded to 6.36. The only issue that I have now is that the Dude server is only accessible via Dude 6.36 client admin details only. For some reason, the "Admin" area is gone from the system. Is there anyway to display and hav...

Hi There, I'm trying to upgrade from our 6.35rc1 to 6.36. I've added the file (http://download2.mikrotik.com/routeros/6.36/routeros-x86-6.36.npk) to files in the system, but for some reason the equipment don't seem to upgrade. After rebooting from the command line, the files still appearing under fi...

That Worked for saving the files.

Thanks, Pipa.

Hi There, I'm running Dude server x86 6.35rc1 on a PC and wanting to do a backup of all the configuration and also of all our sites inside the monitor system. Basically, I want to save it all in case of melt down on the server. Does anyone know the simplest and securest way of action for this? Also ...

Hi There, After testing email notification for a couple weeks, I've noticed that there isn't any "time out" option that can be set for the notifications themselves. If you are monitoring a couple units and these come up/down briefly for certain periods during the day, I'd like to know abou...

I've checked all details and had the wrong email server IP address. All worked fine after getting that fixed:-)

Hi There, I'm running different email notifications in the dude for fault purposes. The email notifications work perfectly fine when setting any of the statuses, in this situation, up-->down and delayed message to 10 minutes/I get an email. Now, I'd like to be able to set this option, if service com...

Hi There, I had Winbox freezing up on me a couple times remotely and all the time comes back fine after getting someone to reboot the unit in questioned. I'm wanting to set a TCP Probe on "The Dude" on port#8291 to check/get response from the service. Does anyone know what would be the &qu...

Hi There, I have the 6.34.1 installed on a PC which is acting as server/have the dude. I'm wanting to setup email notifications but when setting all up in the dude I get error in the logs of the MT server saying email can't be sent TO. Can anyone guide me through on how to set it all up correctly? I...