Ip addresses is the one (switch) thing you can't do on the switch chip. On my CRS125 I've set up a management address by: /interface bridge add name=br-vMGMT /interface vlan add interface=ether1-master-local name=vMGMT-ether1-master-local vlan-id=1 Note: My config uses everything slaved to ether1 (s...

Hi, You are close. As a relative newb, this bedevilled me too. Mikrotik does vlans a little differently than most gear. You need to add an entry in vlan for each vlan/port combination that uses tagged traffic: /interface vlan add interface=ether1 name=vlan11-ether1 vlan-id=11 add interface=ether1 na...

In this board's fine tradition of answering one's own question, I got this to work. I ended up doing a reset after locking myself out playing with the switch vlan settings. By doing that reset and not re-entering the "interface ethernet switch" settings, I think that fixed the things that ...

Trying to configure an RB2011(UiAS-RM) for vlans, trunk uplink and bonded (LACP and 802.3ad) downlinks. Vlans: name=mgmt vlan-d=10 (with management ip address 10.1.1.41/24) name=cust-1 vlan-id=41 name=cust-2 vlan-id=42 Ports: sfp1 - uplink to core switch: tagged vlans mgmt,cust-1,cust-2 ether6,ether...