Hello I have an RB 3011 with following confiruration ------------------------------------------------------------ Network 1: ether 1 is WAN ether 2 - 5 is LAN ------------------------------------------------------------ Network 2: ether 7 is WAN for VoIP ether 8 - 10 is LAN for VoiP ----------------...

thanks i will try this

Hello

Yes i should be a tunnel between 2 RB 3011

Thanks

Thanks but i need a site to site config

hello

i have the following problems

the vpn connection is estabilished, i can ping from side 1 to side 2 but i dont can ping from side 2 to side 1.
i must first ping from side 1 to side 2 then it works.
the next problem is on each side packets are missing.

any idea
thanks

i have try this. it´s only works when i disable the masquerade rule.
but when i disable the masquerade rule the portforwarding doesnt work.

thanks berni

hello i have an rb3011 and want to do following things. LAN1 - 192.168.1.0/24 LAN2 - 192.168.2.0/24 LAN3 - 192.168.3.0/24 WAN1 - 100.0.0.1 WAN2 - 100.0.0.2 WAN3 - 100.0.0.3 Gateway for WAN 100.0.0.6 i have an all LAN Subnet Internet, but the external ip is this from wan1. How can i solve that LAN1 g...

Hello

my wan address are all in the same subnet.
can you give me an info who the rules must be

thanks

i have change that all the wan addresses to one interface but it also not working.

Hello

my wan address are all in the same subnet.
can you give me an info who the rules must be

thanks

Hello I have install a RB3011 with OS 6.34.3. My configuration is the following ether1 management ether2 LAN1 ether3 LAN2 ether4 LAN3 ether5 LAN5 ether6 WAN1 ether7 WAN2 ether8 WAN3 ether9 WAN4 My external IP´s look like this WAN1 111.111.111.1, WAN2 111.111.111.2,WAN3 111.111.111.3,WAN4 111.111.111...

now it works i have used the wrong npk file

i have install the files with netinstall, but when i power down and up the rb the device have the old settings

anyone an idea

i have check it on different ether ports but its not possible, also with winbox with the mac adress theres no way to connect.
i will test your solution with netinstall

kind regards

Hello

I have make a error configfiguration so i cant connect me with the router board.
how can i reset the device.
i have test power down press reset wait until act led is flashing release reset button
but that dont works

any idea

thanks bernhard