MikroTik

schorsch

Is it really true, that after more then 10 years of the feature request(s) this "feature" is not already implemented? Or am I doing something wrong at the configuration? I get adresses and protocols.... but no AS information... If routos is not able to deliver this information, do you have...

schorsch

Hi normis, if we place this unit into a street cabinet together with a DSLAM, one PSU with -48VDC and one with 230VAC would be fine. At our CO we have -48VDC and 230VAC both redundant. I would prefer modular PSUs. So just give the unit two free slots and variants of PSUs, so we have ONE hardware tha...

schorsch

Hi, I need to use the CRS317-1G-16S+RM in a TELCO environment (-48VDC). What about the "internal voltage" behind the two bulit in AC power supplies? 24VDC, 48VDC? Is it possible to replace the internal AC power supply with eg. https://shop.meconet.de/Stromversorgung/bis-48-Volt/DC-Umruests...

schorsch

I would need this feature too!

schorsch

Is there any solution?
We have the same problem here.....

schorsch

Just set your internet-link (and the hops to your monitored devices) as parent of your clients.
So you just get a notification of the device change from your parent.

schorsch

And what can I do with it right now?
Just do a kind of disco inside the cpe enclosure?

schorsch

I have seen in the changelog there is a new feature called "user-led".
But I couldn´t find any documentation about this, can anyone tell me what it does exactly?
Is it possible to align an antenna via the led?

schorsch

The same thing sometimes happens here. I suggested it is the guest system of the virtual host which runs out of power (7 W2k3 Servers incl. Dude 2.2 on a proliant server @3GHz 4GB RAM).
Next week the dude runs on a dedicated server again, maybe the problem is gone away....

schorsch

I tried this too, no result with snmpwalk v1 and v2

schorsch

Same problem here since 2.2.
All x86 systems run in secure mode all mips systems only unsecure.
Doesn´t matter if the system has OS version 2.9.38-2.9.41

schorsch

Now tested without risercard (it´s a 1U Router) -> same effect

Tested it in an old MSI board with via chipset: RUNNING!!!

Seems to be a problem with the INTEL chipset.
Tomorrow I´ll buy a new board with VIA chipset

schorsch

We have also a problem here with an Intel board (D945GTP). System only boots with 3.0b6, otherwise the onboard ide controller is not recognized (seems to be so). We plugged in an RB44, but only one port appears in "interfaces" We plugged in a second RB44, same effect. We plugged the board ...

schorsch

The same happened here. I´ve got the original license via our distributor.
It lasted just a few hours...

schorsch

No, service manager says timeout and the logfiles of the dude do not have new entries.....

Now I installed the dude on a new machine and in the next days I reconfigure the dude from scratch.

And the I will make a backup

schorsch

Nice idea...all our customers have a backup.....
but ....

schorsch

Do I really have to configure a new Dude from scratch?

schorsch

Since the last reboot of our NMS-Server (Windows 2003 R2 standard) the dude (R2.0) doesn´t start as service anymore. Neither the event-log of windows nor the dude logfile shows any usable information (event-log: service not started, dude logifle: no new entry).

Any idea?

schorsch

We use HP Notebooks with the same card/chipset. Windows XP prof. works without problems at 2.4GHz and 5GHz.

schorsch

good idea....
i will test if it is practicable

schorsch

Hi, Is there a chance to define a hostname as remote address of an EoIP-Tunnel? I am thinking about an EoIP-Tunnel between two sites, on of them has an dynamic (dial-in) ip-address which could be resolved via dyndns. But every time i try to set the hostname as remote address, an error like "ip ...

schorsch

Hi, Is there a chance to define a hostname as remote address of an EoIP-Tunnel? I am thinking about an EoIP-Tunnel between two sites, on of them has an dynamic (dial-in) ip-address which could be resolved via dyndns. But every time i try to set the hostname as remote address, an error like "ip ...

schorsch

Any news ???

schorsch

Thanx!

Und: Schöne Ostern!

schorsch

We are planning to equip our new cpes with routerboards. Is there a possibility to allow the customer to allign the antenna without giving him access to the whole router? Maybe with an integrated webserver or with a client application via snmp?

Or do I have to write my own application?

schorsch

did you try http://www.mikrotik.com/download/neighbour.zip ???

schorsch

I´ve reconfigured one router from scratch (only AP, EoIP-tunnel and a bridge) and it worked fine.
I assume that the something went wrong with the upgrade from 2.8.28 to 2.9rcX.

Now I have to reconfigure all our routers outside from scratch

Anyway, then it works.

Thank you for your tips!

schorsch

Thanks a lot for your tips!!!

schorsch

We have already tested it on another router/AP which is connected via an ethernat-cable to gw-core. ARP is enabled at all devices and bridges. Reboot has been done many times with no effect. I think we erase the configuration on both (and later on all) systems and reconfigure them. I hope I can do t...

schorsch

I tested a little bit with ethereal: Client sent PADI, passed through AP, EoIP-tunnel, reached pppoe-server on AC pppoe-server on AC responded with PADO, passed through EoIP-tunnel, is visible in packet-sniffer on AP, but within ethereal on the client I can´t see the PADO packet. AP-Interface an EoI...

schorsch

Has been already configured like this

Any other ideas?

schorsch

We had the problem at rushhour. Throughput on wlan decreased, ping-times went to >1000ms and then many CPEs disconnected an reconnected again. Solution: We had some f***ing Linksys WET54G used as CPE outside. We changed all WET54G with Linksys WRT54G (with wdsl-firmware from meconet). Now everything...

schorsch

THX for your reply. I will test this out tomorrow.

schorsch

??? ANY IDEA ???

schorsch

We had this problem with 2.8 if a client used the original windows xp pppoe-client. With raspppoe everything was fine. The problem came back with the upgrade to 2.9 (already with raspppoe!) We disabled MPPE. Now it works. we didn´t test since the last update to 2.9.5. Maybe it´s fixed now. Hope it h...

schorsch

My Setup: WirelessClient--MT(AP)--<Ethernet>--MT(AC) Both 2.9.5, EoIP-Tunnel between the 2 MTs AP-interface is in the same Bridge-Group as the EoIP-tunnel on the other side (AC) EoIP-tunnel is in a bridge-group. On top of this bridge-group is the pppoe-server. Now something strange happens: Client (...

Search found 36 matches

Re: Traffic Flow ( netflow) Autonomous system information

Re: CRS317-1G-16S+RM - Hardware specification

Re: CRS317-1G-16S+RM - Hardware specification

Re: MPLS - Fast reroute. When?

Re: RouterOS connectivity

Re: HA dude server

Re: user-led: any documentation?

user-led: any documentation?

Re: Device "Settings" hangs/freezes

Dude is not starting anymore

REQUEST: EoIP - hostnames as remote-address

EoIP-Tunnel: Remote hostname instead of ip-address

CPE-Antenna alignment via customer / Application available?

[SOLVED] PPPoE over EoIP: strange phenomenon