MikroTik

mworsnop

I guess I don’t understand the link you sent me is the same chat Forum thread that we’re on? Basically are you telling me to read this again? I really don’t know the answer. That’s why I asked.

mworsnop

That’s what I originally was thinking was for the roaming that it would take care of passing it off to the other WAP as needed. I don’t know about anything else that it needs to do, but that’s the most important part for me anyway.

so what does everybody think?

mworsnop

no fault of Mikrotik but often the devices that I am walking around with do not switch to the next WAP. I guess maybe you’re right what is capsman going to do to help me? Good point

mworsnop

I have an RB5009 and 3 - haP ax3. Presently all of the AX3 have their own SSID. I also use the AX3 as a simple switch for a few other device devices that are hardwired. I have watched a handful of YouTube videos on making this work with CAPSMAN. Does anybody see any problem with this hardware config...

mworsnop

that’s exactly what I’m looking for. Is there a way to have it display the host name of the client? presently it shows the MAC address. then I have to search on the DHCP server, active leases.
Like I said, I thought the old wind winbox did this automatically using quickset menu.

mworsnop

On the old version of WinBox, and the quickset mode, you could see all of the clients that were currently connected to the Wi-Fi. Is there anything similar to that on the new version of WinBox? Or is there a ROS command that will show this?

mworsnop

The camera works with a 12 V plug directly at the camera. It also works if I plug it into the 24 V - 802.3/af/at power supply via POE. I was hoping to have all Mikrotik equipment but Im going to get a different brand that handles the POE cameras well. Oh well. Thank you everyone for your input.

mworsnop

I think I need a different injector for the power. It powers the RB750 ok. But not the camera. I will order a different injector I guess. I have a passive injector that powers the RB750 but doesn't get to the camera. The other one I have is 802.3/af/at but it does not seem to work either. Using the ...

mworsnop

I had left it at auto on originally. Then I tried forced on. That didn't make any difference.

Here is a screen shot. The info under the POE status seems to be the same even if the camera isnt plugged in

mworsnop

I have one camera in my testing environment. I have a active Poe injector. The camera plugged into the Poe injector works great. I then put the RB750UPr2 hEX PoE lite into the mix. The cable coming from the Poe injector I put into the first port POE in. The RB 750 powers on and is functioning as I c...

mworsnop

THANK YOU to everyone above that helped me so much to get the right equipment ordered, and learned a LOT. Everything will be here within a week and I'll see what kind of a mess I can make. Thank you once again to everybody.

mworsnop

Current plan is 2 - CRS310-8G+2S+in 1 - RB5009UPr+S+in 4- XS+85LC01D Is that the correct SFP? That is MM - 850 nm Didnt see anything else? Maybe select another brand for the SFP+ ?? https://www.amazon.com/10Gtek-SFP-10G-SR-Transceiver-10GBASE-SR-300-meter/dp/B01N1H1Z2F/ref=sr_1_2_sspa?crid=1X10KCKRR...

mworsnop

Im older now and retired from software development. My company in addition to providing software did lots of installations of the hardware too. I had experts working for me that understood all this way better than I do. I started with Mikrotik when some of the engineers brought back some of the earl...

mworsnop

wow, thank you so much for the information. I really appreciate it now. I’m going to have to go read about everyone and try to figure it out, but I think I’ll just follow what you said and get the 24 port. Why would I need TWO (2) SFP? anything in particular that I should watch out for when ordering...

mworsnop

thank you both of you for all of your information. That was a good point that the reality is checking the 25 filter rules with 512 byte. So compare what seems to be a reasonable actual occurrence, good idea would you suggest running fiber to the switch that’s downstream from there? Or could I just u...

mworsnop

I should have specified more particularly what I was wondering. The stats on the CCR appear to be three times better, If I just look on it first set of data on the stat sheets. So is paying an extra $150 worth the difference? On the other hand my current router is 20 times slower on the specs Router...

mworsnop

I'm thinking about upgrading my network. Below are two that seem great. The specs on the CCR seem impressive. CCR2004-16G-2S+PC RB5009UPr+S+IN I aleady have a few hAP ax3. My main router board is older and seems so be too slow. Also have a really old HP Procurve switch. That needs replacing also. Wh...

mworsnop

Sounds like something that's a little bit more complicated to set up rather than just a couple of clicks. Where would I find something about downloading something to a docker container?

mworsnop

is there a way to Speed test on the router like Ookla. Then I would know if the Internet is working properly or there's something internally not working right.

right now I have to take a laptop and plug it directly into the cable modem and do a check that way it's the only way I know.

mworsnop

I found the bridge and ports and somehow, ether1 was not listed as being bridged. I changed this so it is bridged again.

I changed the DHCP client to go to the bridge.

But the crazy question is why did this change?

mworsnop

I have a hAP ax3. I setup using the QuickSet feature to setup initially. It has been working well. Recently, I lost internet connectivity on devices connected to this router, despite the router itself being able to ping the main router. - I initially had the internet cable connected to ether1, but d...

mworsnop

RB260GSP or hex PoE lite? I have Mikrotik WAPs and main router already. I need to add connectivity for 4 POE cameras. It seems like the hex POE lite would be more common to what I'm used to because of the RouterOS. But I am far from an expert. This is just around my home. I know how to make these th...

mworsnop

my network used to have three of the EERO access points currently and a Microtik router. The problem with the EERO as you can’t separate the 2.4 and the 5.0 bands and a lot of devices I use for home automation want the 2.4 only. I recently added two of the MikroTik HAP Ax3 and are using them for an ...

mworsnop

Yes its also has the PORT_NUMBER both I assume are not able to modify.

Thank you for the help!

mworsnop

I tried that and it doesnt show the info either. But I did find the port number by doing this below. I am assuming this is the only place to find the port number. [mark@MikroTik] /interface bridge port> print stats Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload 0 I H ;;; defconf inte...

mworsnop

How do I know which physical port is which? On the GUI I dont see anything that says what a physical port is labeled. When I set this up I left the names with like ether7, ether5 etc so I know what physical port I am referring to. If I changed the names of the ports then I think I would be lost. I a...

mworsnop

Thank you the forward was all that was needed.

I appreciate everyones help!

mworsnop

I am trying to block the one IP from accessing the internet. 10.215.81.105 is the internal workstation I want to block

mworsnop

Yes I just left the automated filters in there when I started it. Here is the list. Sorry I am new at this! [mark@MikroTik] > /ip firewall filter print Flags: X - disabled, I - invalid, D - dynamic 0 D ;;; special dummy rule to show fasttrack counters chain=forward action=passthrough 1 ;;; defconf: ...

mworsnop

I have the following filter but it doesnt seem to work? What did I do wrong? I am trying to block the one IP from the internet

chain=input action=drop src-address=10.215.81.105 log=yes log-prefix=""

mworsnop

Thank you again.

mworsnop

Looks like the model you recommeded has WiFi in there too. I really do not need another WiFi access point. Is there one that doesnt have Wifi?

How about RB3011UiAS-RM
??

mworsnop

I disabled several things and removed most of the obsolete firewall rules and still only get 200 Mbs on the internet. OK thank you for the advice on the new model! Appreciate all the help!!!!

mworsnop

CPU runs at 98% when running a download test from speedtest.net

Does that mean I need a different box with more of a CPU?

mworsnop

I still dont see the huge list of QOS? What are you seeing that looks like lots of work?

mworsnop

The queue type PCQ was created so that everyone shares the internet evenly. I will look that up again and try and figure out what I need to change

mworsnop

I configured it years ago and it just works! I dont mess with it hardly ever. I will look up PCQ and try and figure it out.

mworsnop

Does this hardware support 1 Gb?

Where is the PCQ? I'm using web config. What should the setting be?

mworsnop

Model is a 450G Sorry it took time to find that in the webconfig. # may/08/2018 19:06:49 by RouterOS 6.40.5 # software id = 3J8U-1DQT # # model = 450G # serial number = 1DFC01E27314 /interface ethernet set [ find default-name=ether4 ] arp=proxy-arp comment="port 4 - Existing Mark Systems intern...

mworsnop

That's my question. There must be something to tell me what the hardware is. If the hardware can't support 1 Gb I need to change to new hardware. So how do I see the current hardware?

mworsnop

I just dropped off my business line with Spectrum Internet and got a residence line 400 Mbs down and 20 up. BUT I guess my old routerboard doesnt handle the 400 Mb speeds. Is there a setting on this or how do I find out if I need a new routerboard? If I need a new version what is recommended? Simple...

mworsnop

Thank you for the help!

mworsnop

Code: Select all


Can someone please tell me whey this comes back and says inactive time? I actually want it to work from 22:30 - 07:00 



1 I  ;;; Drop Times

      ;;; inactive time

      chain=forward action=drop src-address-list=jes time=22h-23h59m,sun,mon,tue,wed,thu,fri,sat log=no log-prefix=""

mworsnop

I upgraded to the latest RouterOS and since then the IPFIX Netflow using PRTG is showing the public IP for lots of the connections rather than the internal IP. I then removed the IPFIX sensor in PRTG and re added it but have the same results. I need to be able to see what IP is using the bandwidth e...

mworsnop

I got this working. The IP Firewall didnt seem to kick the user off at the time. So as per your suggestion I added a schedule one minute later to drop the DHCP. That worked great! Problem solved! Thanks for everyone's help!

mworsnop

this is the only rule I have. Been pretty simple up to now. How would I make a script to drop that connection? Shouldnt it drop by itself just from the rule however?

THANK YOU

mworsnop

/ip firewall filter add action=drop chain=forward src-mac-address=F8:A9:63:34:B9:91 time=21h15m-23h59m,sun,mon,tue,wed,thu,fri,sat

the weird part as I said is when the time of day hits then on the GUI you see the byte counters show the traffic.

mworsnop

/ip firewall filter add chain=forward action=drop time="20:00:00-23:50:00,mon,tue,wed,thu,fri,sat,sun" src-mac-address=F8:A9:63:34:B9:91 I have the above filter in place. When the time hits I can see the packets counting on the GUI interface which start counting exactly at the time the fil...

mworsnop

/interface wireless access-list add authentication=no forwarding=no interface=ISMH mac-address=\ E8:2A:EA:B6:05:F8 time=\ 0s-9h,sun,mon,tue,wed,thu,fri,sat add authentication=no forwarding=no interface=ISMH mac-address=\ E8:2A:EA:B6:05:F8 time=\ 22h10m-23h50m,sun,mon,tue,wed,thu,fri,sat

mworsnop

Yes the wireless access point. I dont know how to use the command line very well. I use the GUI for most everything. Could you please tell me what I exactly you would like to see and what to enter to get that info? I am wondering if its because I have 2 rules. One from 00:00 to 08:00 and a 2nd on fr...

mworsnop

I have an AP Access Rule with a time constraint, and it works great if the client is not connected. However if they are already connected then when the time comes the client remains connected. If they drop off and try to then come back it works properly.

Search found 51 matches