Hi, I've managed to setup an RB2011 with 4 VLANs / DHCP servers. I'm now looking at queues to prioritise certain traffic. I'm following the tutorial here . I've adjusted the bandwidth to reflect my connection (60Mbps symmetrical) and the mangle rules to identify my RTMP traffic instead of VOIP. I've...

Aha, I managed to find the solution viewtopic.php?t=177892#p874953 !

I needed to specifically set the CIDR on the VLAN addresses otherwise it defaults to /32

Of course it doesnt work! ONe Bridge, all vlans, and you WRONGLY configured /interface bridge ports /interface bridge vlans ( totally missing ) Thanks for your help so far, I've having another crack at this today. I've reset the RB2011 to blank / no configuration and I've copied the code you posted...

Thanks for the advice. I've removed the 192.168.88.0/24 subnet which was just left over from the default config and I've created a separate MGMT VLAN. I've also created VLAN bridges so that I could assign ether3 to the MGMT VLAN. However ether3 now has the same problem that it can't access the inter...

I tried adding the LAN to my bridge, which got internet access via the AP's SSID's, but this is circumventing the VLANs and gives me an address in the 192.168.88.0 range.
So could it be still be a firewall issue?

Thanks for the feedback! I'm made those changes in the firewall as suggested, but I'm still not getting internet access via the AP / VLAN's. The ether3 port works though. Also: (1) This router is not in production whilst I am working on it. I am using the WAN interface for administration so that I d...

Hi, I'm trying to set up VLAN's on an RB2011 connected to a Zyxel NWA1123ACv3. So far I've got the VLAN's set up on the ether5 interface and a DHCP server configured for each of them. However none of the AP's SSID's can pass internet. I also cannot ping the VLAN's gateway from the client device conn...

I am trying to configure a Mikrotik RB2011UiAS-RM to work behind a Virgin Media SuperHub with a static IP. Virgin does not allow the static IP to be used on another device, but I believe there are ways around this. I believe I have 2 options. 1) Put the RB2011 in the Superhubs DMZ and assign it an I...

The only DHCP server running is on the old router and is assigning addresses in the range 10.0.2.100-199 The RB2011 is set to use the address 10.0.2.200, so there should be no other devices using that address. I have just unplugged the RB2011 from the network and tried pinging it from a server that ...

Another curious thing I have noticed is that I can login to another machine which is connected to both the old router and the RB2011 and from there I can ping the RB2011. So the connection appears to be fine for that machine . The issue seems to be other devices making a connection and maintaining i...

After being able to ping the RB2011 this morning, I could suddenly no longer ping it when connected to the other router. I thought the issue could be with the port on the RB2011 instead of the switch so I just unplugged the cable from ether5 and plugged it into ether6 and the RB2011 was instantly av...

It's a unmanaged switch (Netgear JGS524). I have no issues with any other devices on this switch and it is the main hub of our network. I have tried moving the RB2011 to different ports (4, 8, 21, 22) and each time it works fine for a while, and then becomes unresponsive. I have been running the DHC...

I have tried connecting the router directly to my laptop and it seems to work fine, but I can't leave it plugged in this way. I then tried various different ports on the switch, and they all seem to have similar problems. I have some servers connected with static IP's and they can ping the router OK...

FWIW my current config looks like this (but with the DHCP server disabled via Winbox): /interface bridge add name=bridge /interface ethernet set [ find default-name=ether1 ] name=WAN1 set [ find default-name=ether2 ] name=WAN2 set [ find default-name=ether3 ] name=WAN3 set [ find default-name=ether4...

So I tried disabling the DHCP server and setting a manual address on my Macbook, however I was having trouble pinging the router and getting an internet connection. The router itself appears to be fine and I can ping the internet from the router via Winbox. I tried changing the routers response to I...

Yes I tried entering the MAC address of the client computer but it didn't work. Also, I can't realistically expect guests to know how to do this.

Also, some further testing on the original Mac that had trouble: I do get an IP address, but I cannot ping the Mikrotik router at 10.0.2.200. However, when I click 'renew DHCP lease' in Network Preferences on the Mac, the router responds to the ping command still running in the terminal. I get the s...

It seems there are issues with other computers on the network too. Lots of them (mostly Mac's) can't ping the router's IP, although they receive an IP address. Also a PC on the network can't access the internet. This machine has trouble with DNS servers. I am using Google's servers (8.8.8.8 and 8.8....

The issue has returned unfortunately. The same Macbook Pro which couldn't connect before had been working fine until this morning. Once again I removed the DHCP lease via the Webfig interface and it was back online, again with the same IP address. I really need to fix this, as I am not always around...

I just tried to connect via ethernet cable to our switch and the Macbook Pro has the same problem, so it's nothing to do with our Access Point. I then just tried logging in to the router and removing the DHCP lease assigned to the computer. The computer now has an internet connection! However, it st...

So I have changed the Macbook Pro to have a static IP that connects to the old router on the same subnet. This works fine, but when I change it back to DHCP it gets an IP from the RB2011 but there is no connection to the internet. I could really do with getting this device online - does anyone have ...

I have almost finished configuring our RB2011UiAS for 2 WAN PCC load balancing and NAT hair-pinning. The last thing I have done is enable the DHCP server and disable the DHCP server on the previous router we were using. All of the devices on our LAN have been able to connect except one, a Macbook Pr...

Thanks, I have got WinBox working on my Mac with Wineskin. My current config is below. I now have a working internet connection, but how can I configure load-balancing for the second internet connection? Or even test that it is working? # may/03/2016 14:42:26 by RouterOS 6.35 # software id = XXXXXXX...

I am connecting to the RB2011 via ether5 at the moment so I think I will lose connection to the router when I delete the default config? I think this is the problem I had before, so I am trying to work with the default config. Or is there another way of connecting to the unit? As far as I know, ther...

Well there are 10 ports on the router and I want to set up 3 of them as WAN ports with load balancing and use another one to connect to an external switch, assuming this is possible?

So that provides another ethernet socket on the front right? Is it not possible to use one of the other sockets on the front of the unit?

Thanks, it appears that the SuperHub is not working with my laptop now, when it's in modem mode. Looks like it won't work that way for some reason. I have now turned off Wi-Fi and the DHCP server and have set the IP address as a default gateway on the RB2011. I now need to set up another SuperHub on...

Hi, we have just bought a RB2011 can I am trying to configure it with a Virgin SuperHub 2 (BUS_V2.37.13). I have put the SuperHub in modem only mode, and when I plug the ethernet cable into my laptop I get an IP address from the Virgin DHCP server and can connect to the internet. However, when I plu...