Hi Sindy, iRHuefTx0rDoEuyidx/e3SWr17b9DtRUkp4LEtD3mv1W6hCFw5of+T3LxPGwKTRd aPk6nRZeUp7HV7nIctEGMFuvED1mYPUMF0v8vZMLeTBdVed1seXvuL9a4wuiF2nB PqrFncu7ochX5LyU/Go4JFsyFp4QYxAyuKhdzSP/aZAGUty3xm14m7r/WJEeJHA3 X0rvp9Sslx9zfkfRU7A2xgAdHS10LTk8Aj3C0MqW6RMHZAyw5r8y6zGfG9Ias0SF YuU5HeaZEh+2A6NFQXTmdM6uP7XzB9...

Hi Sindy,

I have made a mistake, and edited Ipsec policy related to FBRD group.
Now, its edited as requested, and same situation, webpage is not opened.

Hi Sindy,

Did as proposed, and now I have access to webpages, but outside of IPSEC

Hi Sindy,

I have disabled fastrack, and able to reach 9.9.9.9, but nothing better came out.
Same situation again.
I am not able to reach any webpage, only with disabled ipsec I can.

Ooh sry, it ipsec was disabled. /ip firewall nat print Flags: X - disabled, I - invalid, D - dynamic 0 D ;;; ipsec mode-config chain=srcnat action=src-nat to-addresses=10.6.1.80 src-address-list=local dst-address-list=!local 1 ;;; defconf: masquerade chain=srcnat action=masquerade out-interface-list...

Hi Sindy, Thanks, i have re-enabled rules in FW. /ip firewall nat print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; defconf: masquerade chain=srcnat action=masquerade out-interface-list=WAN ipsec-policy=out,none /ip ipsec installed-sa print detail Flags: H - hw-aead, A - AH, E - ESP

Bellow is a IPsec debug: # dec/24/2024 16:21:13 by RouterOS 6.49.17 # software id = BQNP-FVIM # 16:18:15 ipsec,debug,packet ipsec,debug: 300d0609 2a864886 f70d0101 0b050030 3d310b30 09060355 04061302 56473112 16:18:15 ipsec,debug,packet ipsec,debug: 30100603 55040a0c 09537572 66736861 726b311a 30180...

Hi,

Not sure, that configuration is the problem, since tunnel is up, but I am not able to reach anything.

Hi All, I purchased SurfShark VPN, but I am not able to set it up on my 951RB. Can you please help? Config is bellow: # dec/24/2024 09:16:39 by RouterOS 6.49.17 # software id = BQNP-FVIM # # model = 951G-2HnD # serial number = <removed> /interface bridge add admin-mac=4C:5E:0C:71:19:XX auto-mac=no c...

i have 951G,and want to bond 2 wan`s.Script below preroutes everything to Local interface.Is it possible to change this to preroute to a Wifi interface,so multiple users connected to that WifiAP can use bonded Wans? Script: /ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168...

ok i made progress.. SXT is now in bridge mode,dhcp server and pppoe are on 951,ping gets from 951 to 8.8.8.8,but now i have issues with users connected to 951 wlans,they got ip adresses from range 192.168.88.10-254 but unable to reach outside,ping is not passing? admin@MikroTik] > /export compact h...

I have SXT which should be a station wifi device and a RB951 which should be a PPPOE maker,dhcp server and everything else.My main problem is that RB doesnot see comunicate,it shows unreachable destionation: SXT config: # aug/23/2016 06:51:16 by RouterOS 6.36 # software id = AMG0-MRNT # /interface w...

ok i made progress.. SXT is now in bridge mode,dhcp server and pppoe are on 951,ping gets from 951 to 8.8.8.8,but now i have issues with users connected to 951 wlans,they got ip adresses from range 192.168.88.10-254 but unable to reach outside,ping is not passing? admin@MikroTik] > /export compact h...

I have SXT which should be a station wifi device and a RB951 which should be a PPPOE maker,dhcp server and everything else.My main problem is that RB doesnot see comunicate,it shows unreachable destionation: SXT config: # aug/23/2016 06:51:16 by RouterOS 6.36 # software id = AMG0-MRNT # /interface w...

nobody?

I was using for about 6 months 2 wan`s combined onto 1 lan connected by cable and used on 1 pc.Now i have a need to distribute 2 wan connections to 1 lan and wifi embedded to RB951G,is this possible? wlan1 is disabled,will be enabled when script will work.. My config: # may/06/2016 00:19:13 by Route...

I was using for about 6 months 2 wan`s combined onto 1 lan connected by cable and used on 1 pc.Now i have a need to distribute 2 wan connections to 1 lan and wifi embedded to RB951G,is this possible? wlan1 is disabled,will be enabled when script will work.. My config: # may/06/2016 00:19:13 by Route...

I found solution....in quick setup,just clicked on NAT,and works

now i will try with Mikrotik SXT 5HnD instead of air grid,also RB951 for pppoe and dhcp, if SXT is on default settings,which adress i need to add on adress bar to have acess to sxt which will be in bridge mode?

Ok. First good step. Now in ip -- firewall on nat tab change masquerade rule out interface to match out-interface pppoe-out1. [/quote] It shows me that pppoe-out is not ready... screen shot 1 below Second. add dns server in ip -- dhcp-server in network tab after gateway input dns server 8.8.8.8. Thi...

i did 192.168.1.25 on eth1,now i have acess to ubnt...excellent!
disabled dhcp-client on eth 1...
enabled pppoe-out1 interface,shows connected,able to ping 8.8.8.8..good!
But not able to acess internet from any wifi connected devices (by cable didnt tried,not able)?

screen shot below...

[admin@MikroTik] > ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 ;;; default configuration 192.168.88.1/24 192.168.88.0 bridge-local 1 192.168.1.20/32 192.168.1.20 ether1-AIRGRID [admin@MikroTik] > ip route print Flags: X - disabled, A - active, D - dyn...

# apr/26/2016 15:53:17 by RouterOS 6.27 # software id = SHE2-MDLT # /interface bridge add admin-mac=4C:5E:0C:70:3C:A8 auto-mac=no name=bridge-local /interface ethernet set [ find default-name=ether1 ] name=ether1-AIRGRID set [ find default-name=ether2 ] name=ether2-master-local set [ find default-na...

Hi, To start i made Airgrid 192.168.1.20 in bridge,connected to 5ghz AP... 192.168.88.1 is RB951,made pppoe client and authorization passes.Ping from Mtik also passes to 8.8.8.8,but when i try to connect to RB951 via wireless,pc gets 192.168.88.252 but no Int. acess? Pictures of settings below.. TNX...