Have you got a new CI? The Newsletter looks visually really good.

Searched for so long - THANK YOU for linking this, I was about to netinstall my coreswitch just for this.
You saved me some work - cheers!

Hi,
Thanks, but my fault was I didn't enable the VLAN Filtering! when enabled it showed correctly

Hi, Currently using 6.42.6 on a CRS317-1G-16S+. Configured vlans in the bridge menu, everything ok. Now I wanted to backup my configuration and ran a /export. But it's missing the current-tagged and current-untagged configuration! /interface bridge vlan add bridge=br-VLAN tagged=sfp-sfpplus1,sfp-sfp...

Come on MT - this sucks: CCR1016-12S-1S+: /system health print oid active-fan: .1.3.6.1.4.1.14988.1.1.3.9.0 voltage: .1.3.6.1.4.1.14988.1.1.3.8.0 current: .1.3.6.1.4.1.14988.1.1.3.13.0 temperature: .1.3.6.1.4.1.14988.1.1.3.10.0 cpu-temperature: .1.3.6.1.4.1.14988.1.1.3.11.0 power-consumption: .1.3.6...

Try a sfp(+) module

Don't bother, the copper modules are useless currently and there is no information about when they will be fixed. They "may" work under limited conditions but I wouldn't trust them even in such cases.

Why so? anymore informations?

going to jump in - canˋt be worse than some zyxel or d-links imho. 2crs as aggregation switches, 2 more for iscsi/nfs, aruba 256a 48p for clients and 2 ccr-8s+ for internal routing and acl - time will tell. if mikrotik were some months earlier with the 48p models and some switch features (802.11x......

Hi, we are discussing our future core network for a smb (150 users) with 3-5 vsphere hosts and 2 nfs storages combined with some svsan. Now we have 2 zyxel 10gbe switches but as we are already using 2 ccr1072-1G-8s+ for routing the subnets I would consider replacing the zyxel with some decent crs.(2...

Any Informations on how to use this exploit?
I've inherited a wide-range setup with unknown password and resetting will need a crane or something like this

Hi, We currently evaluate the CRS226-24G-2S+-RM as our new client switches for inhouse networking. The plan was to use the SFP-SFPplus1 port for uplink to the core, but as we don't have fiber everywhere we need some switches with copper uplink. As the S-RJ01 don't work within the sfpport, we need to...

Hi, Thanks for your Project. Whenever I try to add a mac-based-vlan rule I can see the new rule, but every value is populated with 0. Dim cmd As ITikCommand = connection.CreateCommandAndParameters("/interface/ethernet/switch/mac-based-vlan/add", "src-mac-address=112233445566", &q...

Hi,
afaik:
Ceee => Center Frequency + 3 extensions "upwards" => 5180 (center) +20 + 20 + 20 (Extensions)

So it should not make any difference in that Setting (other than my opinion "ceee" is nicer to see and calculate)

Hi, a working /caps-man provisioning print of my working config: [admin@CRS125-1] /caps-man provisioning> print Flags: X - disabled 0 radio-mac=00:00:00:00:00:00 hw-supported-modes=ac identity-regexp="" common-name-regexp="" ip-address-ranges="" action=create-dynamic-en...

5Ghz: /caps-man channel add band=5ghz-a/n/ac name=CH36 frequency=5180 /caps-man channel add band=5ghz-a/n/ac name=CH40 frequency=5200 /caps-man channel add band=5ghz-a/n/ac name=CH44 frequency=5220 /caps-man channel add band=5ghz-a/n/ac name=CH48 frequency=5240 /caps-man channel add band=5ghz-a/n/ac...

Quick-N-Dirty List for 2,4 GHZ: /caps-man channel add band=2ghz-b/g/n name=CH1 frequency=2412 /caps-man channel add band=2ghz-b/g/n name=CH2 frequency=2417 /caps-man channel add band=2ghz-b/g/n name=CH3 frequency=2422 /caps-man channel add band=2ghz-b/g/n name=CH4 frequency=2427 /caps-man channel ad...