MikroTik

ubikrotik

not sure. It could be GenieACS. But havnt find any timer in the config file. Still searching ...

ubikrotik

Is there a time limit for running a script by a remote device? Let's say we have this script: :log warning "Script has started" :delay 300 :log warning "Script has ended" This specific script can be launched in CLI or in winbox without any problem. It could last hours or forever,...

ubikrotik

my appologies, all this headhach for a stupidmissing package. wireless was missing. it works now!

ubikrotik

How do you guys upgrade ROS using the push file button ? I read trhe wiki and this thread but something is not clear enough for me. Here is my xml file uploaded in genieacs (1. firmware upgrade image) Both url are reachable by my router, i can : tool/fetch url=htt p://10.2.31.15/uploads/routeros-7.1...

ubikrotik

That is a bad new. So there is no possibility to sync AP without additionnal protolcol. 802.11be woluld be a better path for mikrotik if they count on 802.11 protocole only. Wifi7 has built-in gps timing feature. The only purpose of this ax serie is probably campground and festival to beam on wifi d...

ubikrotik

Hi guys, maybe Mikrotik staff like @Normis can answer this. Will the new Ax series allow outdoor nv2 protocol? If no, will Mikrotik support this protocol in the future?

I don't think 802.11ax is made for WISP usage. Am I wrong?

ubikrotik

Is it still acurate? Sill in beta or now released?

ubikrotik

still the same. unable to mass upgrade our routers with the dude. any update guys? @normis

ubikrotik

ap or cpe? NV2 or 802.11?

Will part of the 6ghz available, if yes does it allow us to add a gps?

ubikrotik

im lookinf for something like that : http://192.168.10.1/ip/address/add=addr ... rface=asdf

ubikrotik

I use a board based on microchip 32bit to push data over thingspeak server and make graphs and trigger event. It works great, the thing that is cool is that you can send url string to the right channel. For exemple: api.thingspeak.com/update?api_key=MY_API_TOKEN&field3=92, this command send the ...

ubikrotik

not ready to dive into ros7 for now, I upgraded to the last LTS ros6 instead.

ubikrotik

@MARK47 did you fix your issue? We are experencing the same problem running 6.45.9 on a rb4011. for a long moment cpu is low then one cpu goes crazy and management process too.

ubikrotik

I will take a lokk to the change log, thnaks guys!

ubikrotik

is there any improvement in ros 7 ? you will see isnt an option when you are in production. Donc try to fix something that work even if its not perfect. I dont want to use a buggy fw. ROS is new.

ubikrotik

Do you still have unstable link?

We have a lot of wap60 installed and relatively close to the AP, about 50M in 62ghz ch. running 6.48.5 and we have a lot of disconnection every weeks. For no reason, signal at 80% mcs8 or more.

Is ros7 more stable?

ubikrotik

hi, I only can see 2 gpio pins on my rbm33g using the lastest stable ro6 fw.

I installed the iot package to get access to the cli gpio : iot/gpio

how can I activate the other pin ? is there a jumper or a commande to show those pins?

ubikrotik

Rock on TIK! we need: - a list of router, one click access to open winbox - graphs - mass update - automatic backup schedule - local host in a VM - mass configuration option. I.E : changing the value of a string for selected routers. Let say you want to change check IPSOCKS on 380 routers, just sele...

ubikrotik

Do you think trying the lastest ROs7 version a good idea?

It looks like its related to or area. Since we swap both radios and we still have this problem. And it happens only on this link.

ubikrotik

next v7 beta version will have potential fix for this issue. Do you know the cause of this behaviour? We have dozen of nray link in production since months/years and only this specific link has this trouble. We even replaced both nray and tried to swap a nray by a wap60. Knowing the cause would hel...

ubikrotik

Hello! Do you guys had a problem with a pair of nray that see each other BUT wont establish a link until you reboot the ap nor station side? I have a link that do that. It works like a charm for 10-15 days, something 2-3 months sometimes few days , then the link goes down. I some cases, I can still ...

ubikrotik

I have the same problem. Dis you find the solution or a fix?

ubikrotik

we have random flapping or bad negociation (100m instead of 1g) on our 4 new netpower. running from 6.46 to 6.48 fw version. Is it a known issue?

ubikrotik

When will TG fw will be ready? Any ETA ?

ubikrotik

ubikrotik

we sent them 2 supp.rif files the first never get a single reply, and the last one they reply everything is fine with your config. Common it's not serious.I'm not a rookie, i know how to setup my gears. I know my config is ok, as other here described the problem, the router fall into a vegetable sta...

ubikrotik

One of our multiple in the field rb4011 just locked today after about 80days uptime. running both ros and rb 6.47.10 Its cold outside about 15deg C. No power outage or power problem. Nothing special like every times router locked up. Very frustrating that mikrotik dont care. We should buy profession...

ubikrotik

100%, at least an ETA, even if its free, even if people do not have backup, even if, even if. At least to be respectfull with your loyal customers...

ubikrotik

is 6.47.8 the final fixe? did the fw fix your problem?

ubikrotik

yes i thing i got it working now. RB and ROS up to date at 6.47.9 LT and didnt have a single down

ubikrotik

6.47.9 are looking great on LGH60, no downtimes. But wap60 and NRAY it's still the same. We have the same issue as yours, what did you do to fixe it? I even try 6.46.6 on a pair of Nray and it looks eratic again. Signal jumping from 20 to 100, -52 rssi, tx-sector goes crazy then bang it cuts. I toug...

ubikrotik

same problem here. all lhg are runing perfectly, but nray even at short distance are junk.

ubikrotik

we have the exact same problem here. We have a ccr1036-12g-4s and since it reach 300-400 mbps, all interfaces begins to flap. Im supossed to receice my new ccr1036 tommorow i will try annother device. hoenit will be fixe.

we run 6.46.8.

ubikrotik

Hi, we have about 100 rb4011 deployed in our network.

THIS PROBLEM suck a lot you now that?

MIKROTIk team do you have a fix for us.?

ubikrotik

i guess, but the same config work in my crs112, but not in my crs125

ubikrotik

hi, This is my setup : 1 x rb960pgs running ospf, vlan, mpls, vpls and at peak hour +- 90 mbps max this router is connected to a crs125-24g switch. Then we add vlan into that switch for ospf legs and APs. If i ping from the rb960 to the switch i get +-3% of lost. (so my ospf goes crazy and break) I ...

ubikrotik

I received my rbm33g today. I tried to install a KingDian m.2 32gb NGFF ssd to the m.2 pcie slot but it doesnt work. I cant see the drive appear in /system/disk/. if i try a sd card it works like a charm. But the ssd never appear. What do i do wrong?

ubikrotik

what is the dc power range for the ccr1036 board itself?

The actual powersupply is a 120/24vdc but I need to power it with a 28vdc source. Will the board accept this higher voltage?

ubikrotik

Hoo, I found : Condition -1 PC1 -192.168.1.5 PC2 192.168.1.3 Condition -2 PC1 192.168.1.5 PC2 192.168.2.3 Condition-1 When PC 1 one want o send packet to PC 2 it will first check for Source and Destination MAC as all Communication happens at Layer 2 or Data Link layer happens at MAC . Source MAC add...

ubikrotik

noob question sorry : For exemple, my laptop want to reach www.google.com web site. How does packets flow from the pc to the Google's servers? Realy basic exemple : src :192.1y68.0.10 dst : 8.8.8.8 router : lan2 to lan5 in bridge lan 1 is our wan port. packet leave my computer lan card, then hit the...

ubikrotik

same problem here. Any update about this?

ubikrotik

And what about now? Still nothing?

ubikrotik

I have noticed hat LDP neighor of the next hops diapear and come back after 10 sec..

so the vpls interface disconnect from the router. Is there a way no troubbleshoot that behavior? LDP and MPLS on loggin dont work. FW : 6.4.1

ubikrotik

we have a simple path here on our network : main router ----- af5x--------af5x---------router2--------ap---------cpe. There is a vpls from main router to rtouter#2 and still have lost packets. If I ping the router2 from the main router. Everything is good, no more latecy, no more packet lost. On of ...

ubikrotik

wow.

We have airfiber, prism radios and we still see some packet lost in vpls and higher latency then outside vpls tunnel. I think mpls/vpls was a bad bad move.

ubikrotik

NickOlsen, your ubnt post looks like the exact same problem that i have. Did you find any fixe for this situation?

ubikrotik

I will try it tommorrow!

Not just my ICMP ping affected. Voip and gaming to. I never had this issue before with my old statics routes.

thx.

ubikrotik

to the main router, all vpls are bridged together. We set split horizon value to 1 for all vpls interfaces. But yes they are in the same bridge.

Yes traffic crossing ubiquiti wireless links.

ubikrotik

I also noticed that:

when I run Torch tool to specific VPLS interface I can see traffic comming from an other VPLS interface to dst internet side like I explain before. One other thing that I found today is that RX is always 0 bps but Tx is higher (+512 bps).

ubikrotik

we registered higher max latency when pingging devices that need to pass through VPLS.

and a lot of link down as well.

But once again. the pysical link is good since I have 0 packet lost from the main router to the tower's router.

ubikrotik

You need to problem shoot all links between the VPLS sites. Do you use MPLS? - have you checked your l2mtu on all links? Its not common to drop packed in a VPLs, and not a regular ICMP ping or something like this. Is there anny different in recived packed MPLS compared to ICMP? - IF ICMp is good - a...

ubikrotik

mmm, not sure,

for exemple
scr: 10.10.10.100 (cpe of an other vpls)
dst: 66.75.26.58 (internet address)

ubikrotik

Hey guys i think its now fixed. Since this monday, i removed the switch and installed the lastest version in my af5x. No more drops/down. if it come back again I will let you know[emoji2] thank you very much for your help.!!! there is an other issue in our network now. If you want to take a look[emo...

ubikrotik

If they are in same l2 domain, you can try to ping host in different VPLS. Dump it and see what you got.

not working. I cant ping from different VPLS interface.

ubikrotik

I dcided to creat an other post for the second problem.

ubikrotik

we have a problem. We have multiple tower connected in a WISP. OSPF/MPLS/VPLS. This is strange, we lost packets inide vpls but not outside: for exemple : rt1 to rt2 = /29 rt2 to rt3 = /29 and so.... if i launch a ping from rt1 to rt3 there is no packets lost. That mean that the physical link is good...

ubikrotik

Maybe it's VPLS management signaling packets? You should dump this and watch in a wireshark. Also, check all interfaces have the same horizon value. And make sure you have latest ROS version. yes they have the same horizon value. All set to 1. routeros and routerboard == 6.4.2 yes i'm not familiar ...

ubikrotik

Hi, we have 2 problems here that we can't find the source. we have a network running ospf/mpls/vpls. In the main router there are 30 VPLS interfaces. each interfaces have horiszon value set to 1. They are in the same bridge. When i run torch tool on specific interface, sometime I can see traffic com...

ubikrotik

and should i use auto isolate (port setting)?

Envoyé de mon Pixel XL en utilisant Tapatalk

ubikrotik

yes this is default /bridge/stp

protocol mode : rstp

on all bridge. should i use none?

Envoyé de mon Pixel XL en utilisant Tapatalk

ubikrotik

10.10.10.4 is the switch - what kind of switch=? Doeas it use rstp? . Then dissable it on all devices. You dont need it if you have control to your networkm and ypu dont have loop.

crs112

rstp? not sure?

Envoyé de mon Pixel XL en utilisant Tapatalk

ubikrotik

well, I can share to you the diagram. But this is really simple. our main router has a cable that is connected to an airfiber. At the other end, we have the remote airfiber, a cable, a switch a cable and the router #2. /29 for all of this devices eg: 10.10.10.1 is the main router 10.10.10.2 is the f...

ubikrotik

exactly, and also unable to reach the remote PTP radio. But it's still up and running because, when i'm logged in the first PTP radio, I can see the other one running and connected. The link uptime does not reset too. So im sure that the PTP link is good without any problems. We tried NBMA without s...

ubikrotik

It's hard to say. When it happens I don't have enough time to remote acces my main router and do that. The only thing I can say, is that I can't ping the remote router from the main router. (of course if ospf is down). My wireless link Is very stable and strong. No worries about the link. any idea :S?

ubikrotik

we also tried authentification to simple. no cha ges.

Envoyé de mon Pixel XL en utilisant Tapatalk

ubikrotik

broadcast do the same. thats why we switch to ptp.

Envoyé de mon Pixel XL en utilisant Tapatalk

ubikrotik

yes, routeros and routerboard have the latest fw.

in every routers i can see all of my lsa and neighbors. hello, dead interval are set to default. i got a new log last days :

OSPF - init bit set in middle of an exchange

ubikrotik

Hi, We have an issue with OSPF. OSPF : interfaces network type PTP CCR1009 ---- AF5x#1 ---- AF5x#2 ---- CRS125 ---- RB960 10.10.10.0/29 Netwatch pinging : AF5x#1 AF5x#2 RB960 RB and CRS == V6.4.1.4 CCR == V6.4.2 AF5x == V3.2.3 AF5x = never had issues since at least 1 year. Only since OSPF is running...

ubikrotik

Graphs :

Need average rate when scrolling from minutes to all.

It can be helpfull.

thx

ubikrotik

any update here?

My winbox port is now 28291, I cant connecte the dude to routerOS service.

ubikrotik

hi all,

We are running our main router on 6.37.1 (stable). This is a CCR1009. What happens if I upgrade to the current? I know master port will be disabled and A bridge will be created. And also P2P in firewall will no longer work.

Anything else?

ubikrotik

i realized that there is not much information when it stored to the disk. So the solution is not very usefull.

ubikrotik

yes, just creat a new action under logging like our friends said in this post. But instead of email the rule, store it to the disk. Now I would like to email this file only if it's new (maybe by looking at ''creation date'') Actually I run both, email when rule is triggered it send an email, plus, s...

ubikrotik

I have a new way to do that without full script.

Is it possible to send by eamil only new files once written?

ubikrotik

thanx i just did it. i just have to select in topics "critical" and put to prefix "login failure".
very nice without script!

Also working fine, but there is no body and subject

ubikrotik

I made the script for you.... :) Schedule that script every appropriate time, like 10 seconds? Syntax is for RouterOS 6.7+ :log info message=("Start Check Failed Login"); :local currentLoginFailureArray value=[/log find where message~"login failure"]; :if ($currentLoginFailureAr...

ubikrotik

Hey thank you very much my friend!

@JB172

ubikrotik

Is there a way to know by email when someone try to log into a router?

for exemple,I would like to be notify if someone try to log into my router with bad credentials.

is it possible by using a script?

ubikrotik

Stupid compiler :S:S:S loll

it works. Thank you very much.

ubikrotik

i'm running 6.41.3

ubikrotik

hi,

tool/email
send email (for test purposes)
Everything is fine, email sent as supposed

But When i run a simple test email script nothing happens.

here is my script:

/tool e-mail send 
to="myemail@domain.com"
subject="test"
body="test"

any idea?

ubikrotik

mesh implement in the future?

ubikrotik

Not realy, urban deployment. from neighbors to neighbors.
not for backhauling.

ubikrotik

MESH wap 60 possible in the future? Sounds like more appropriate for this band. Short range, large spectrum space. What do you think ?

ubikrotik

not sure, you suggest to make lower queue size for voip? Priority already set to 1 for voip an 8 for generic data.

ubikrotik

p2p option was capturing lots of false positives, so it was removed, i suggest to get rid of any configuration that uses those options.

no I don't use p2p

Bigger Queue size fix my problem.

ubikrotik

no more dropped packets. I'm trying queue size to 1000 pckts.

ubikrotik

thank you

@checito
@stoser

for helpfull comment. I though that smaller pkts help voip for low jitter and less delay. Ill give it a try and post results here.

ubikrotik

50 to 5000 , are you talking about bucket size?

ubikrotik

please see the code and the picture : https://docs.google.com/document/d/e/2PACX-1vS4Th2WC8AaH4J_umCVInZ7ZKYk7APwFvjbaW0qYg7WG6zckPZeFiUVRT3X-W7KWSuAIXjt0putyJ8C/pub Not a very usefull picture ... You could at least have enlarged the column widths so that the statistics could be read. Too many &quo...

ubikrotik

As you can see, SIP-VOIP child queue has dopped packets and that is normal since I maxed it earlier. But RTP-VOIP is not normal. IT's actualy impossible to max this cap, since I only have 10 voip phone here. 80kbs x 10 != 10M or more.

ubikrotik

please see the code and the picture :

https://docs.google.com/document/d/e/2P ... utyJ8C/pub

ubikrotik

no body?

ubikrotik

hello, you sould mark the new conn at first , then mark the packet in this conexion to save cpu usage. then add queue for maked packet.

hope this help

ubikrotik

Hi, I made something simple in my network. I made A queue for a specific ip followed by 2 child queue. The Parent is set to 50 MBPS up and down . Voip child queue to 2mps up and down Another child queue for other trafic. Wich is set to 45M up and down. I made a simple mangle rule to identify voip da...

ubikrotik

backhaul are airfiber (ubiquiti)

AP are airprism + hor 30deg 18dbi (rf element)

CPE are litebeam AC or Powerbeam AC

20mhz width, but we only install client in 5km far from the AP to keep 8x modulation and Good CINR.

ubikrotik

thx for fast reply, In layer 2, What can I do roughly to make voip quality better using mikrotik gears? For exemple, I have 1 client with a 941 router and 1 x ATA cisco SPA112. That goes to A 750upr2 (switching mode) follow a crs112 switch then to my ccr1009 that is connected to my internet provider...

ubikrotik

thank you.

Need I consider VLAN in my network? Make voip trafic in vlan would help Quality (voice cutting, delay, etc.) Am I right?

Some engineer here told me that there is almost no effect on voice quality, VLANs only make it more secure and easier for trouble shooting. I'm a bit confused.

ubikrotik

sorry for this big delay!

Yes I mean INDOOR router. All the structure and wireless network is made. We can test 100mbps+ to the CPE antenna, and now we want to keep this speed at home for a descent signal.

ubikrotik

hi, we have a rb3011 as our main routeur, we ran cables to a rb750 upr2, then to antoher and finaly to a rb941 2nd. in the 941, we have a voip phone that is connected to. We made simple qos rule in both routers, (queue tree, mangle rules to mark packet that goes to the VOIP provider). So that is fin...

ubikrotik

Don't think you'll ever see the (real world) speeds you want on point to multi-point connections... Definitely no where near those speeds with a -80 signal. @ -60 I can certainly reach up to 100mbps. If you read my previous post : I said that is not important to reach this speed at -80. We consider...

ubikrotik

same thing here.

tried a lot of config, different mobile device.
last fw version.
I'm in rural, so 5g is crlea (-109db)
never got mor than 55 mbps on 20/40/80 ceee @ -70

ubikrotik

Hi, can someone point me at the best Wireless home router setup? We plan to give 100/100 mbps internet connection to our customers. We want 5 and 2.4 band (5g 3 chains are not important since almost mobile device are 2 chains max) all ports 1gb Poe ports Router OS We need a good wifi coverage, not i...

ubikrotik

thanks.

i will clean up the air and let you know

ubikrotik

Hello, Who already tried Wap AC device? Did you get good speed over Ac wireless? Just to give you an exemple : My ISP : 100/100 (tested from a connected Computer to the routeur (750upr2) 91.5mbps/89.9mbps) The Wap AC is connected to the routeur directly with the POE injector that come with. My phone...

ubikrotik

Is rb260gs + SWO more powerfull than all other (hybrid device) ?

ubikrotik

okay. Thank you friends. So now I can pretend that I hate SWOS

ubikrotik

crs112 are switchs too, and I can use Winbox and it is running ROS.... I'm confused

ubikrotik

HI, I have a RB260GS with SWOS. It looks like a BASIC version of ros then I would like to know if it's possible to upload RouterOS inside the RB260 then used winbox and all other features.

thank you

ubikrotik

thank you all guys, it helps a lot.

I will try some different scenario and let you know.

Thank you again for your help and support!

ubikrotik

thank you idlemind

but if i do vlan correctlyi still cant understand, why i cant acces to my dhcp server.

I will try to reset all devices and start over.

ubikrotik

Still have question about VLANs. I search on the forum but never found answer. Maybe I don't understand how vlan work. Let say, I have a router, 3011. The router is connected to a crs125-24 then to crs109-8. VLAN1 : 100 VLAN2 : 200 VLAN3 : 300 VLAN4 : 400 VLAN5 : 500 VLAN6 : 600 At the switch side I...

ubikrotik

Thank you sir for your help. Do you know how to have a good jitter ? I know it depends about a lot of things, but are VLANs help to prevent hight jitter? Is it true that separate ''generic internet" from VOIP data help for jitter to get low since the moment the packets are treated at the same '...

ubikrotik

I see. Let say I have a perfect Layer 2 trunk (fiber) from my Voip Provider and my network. What is the next step to setup my Voip ? Already Done : Mangle rule that spot DSCP 46 and mark those packets. Queue tree wich give enough BW at those marked packets, considering 80k per active lines. And prio...

ubikrotik

I don't understand, Big carrier in the usa, mobile carrier,big entreprise, hospital etc are able to make Voip work realy good. If I can control all in my network, why should i not be able to make it work good too?

ubikrotik

realy? nobody know ?

ubikrotik

ok, the higher dscp level, the higher the priority?

packet with 46 value will be sent before dscp 26?

am i right?

ubikrotik

It is actually possible to design a network on which QoS is not really possible and VoIP will never work reliably. Be careful not to do that! In the meantime, make sure your VoIP traffic is DSCP EF (46) and all equipment along the link is handling that. (e.g. enable WiFi multimedia support when req...

ubikrotik

Hi, I made my works. Here my Mangle rule: DSCP_MANGLE chain=postrouting action=mark-packet new-packet-mark=voip-1 passthrough=yes dscp=46 log=yes log-prefix="DSCP-VOIP" Here my Queue Tree for upload part: 0 ;;; --- Upload --- name="UPLOAD" parent=ether1-WAN packet-mark="&quo...

ubikrotik

ubikrotik

ohhh, maybe daily graphs is based on 24 hours ..?

ubikrotik

Hi, How do i read graphs stats? Ether-1 is my WAN. If i take a look to my network during 7:00pm to 11:00pm I can see a lot of peak of 120Mbps and an average of 60 Mbps. When I read graphs (myip\graphs) I only see fore exemple : max in : 72; avr in : 31.22 and current in : 44.52. Isn't supposed to sh...

ubikrotik

problem solved. Thx

ubikrotik

Up.[img][/img]

ubikrotik

any expert here?

ubikrotik

thanks !

ubikrotik

simple queue tab-

ubikrotik

Need help. Parent Queue add dst=ether1-WAN1 limit-at=200M/200M max-limit=200M/200M name="clients-" packet-marks=no-mark queue=synchronous-default/synchronous-default target=10.12.1.10/32 Child Queue add limit-at=2M/2M max-limit=2M/2M name=Voip packet-marks=voip-46 parent="client-1&quo...

ubikrotik

why mikrotik give us this tool?

ubikrotik

750upr2, ccr1009 crs125 show me the true speed.

CRS112 have dificulty to handle 100mbps without burning is cpu to 25%.

ubikrotik

No routing, ether1 master port.

Even tried the quick setup tab to set it up as a switch. Same result.

ubikrotik

Hi, Can someone explain what is DSCP ? WIKI : Differentiated services or DiffServ is a computer networking architecture that specifies a simple and scalable mechanism for classifying and managing network traffic and providing quality of service (QoS) on modern IP networks. DiffServ can, for example,...

ubikrotik

moved to : viewtopic.php?f=2&t=122743&p=603787#p603787

ubikrotik

Hi, i ordered 3 crs112, im disapointed of the bad performance. I know cpu is only 400mhz, but even for switching purposes the cpu running high 2 x crs112 linled together: I cant use the embeded speed test because the cpu is runing to 100% quickly. only 39mbps of troughput. If i plug my laptop to the...

ubikrotik

Hi, i ordered 3 crs112, im disapointed of the bad performance. I know cpu is only 400mhz, but even for switching this device looks like to be bad. 2 x crs112 linled together: I cant use the embeded speed test because the cpu is runing to 100% quickly. only 39mbps of troughput. I i plug my laptop to ...

ubikrotik

yeah, this is a sharp question and I gave you a simple diagram of a part of my network. So sorry. Yes in blue these are switchs. I add to my routers a lot of subnet. The reason is to put together all devices related to this section of thenetwork. For exemple , 10.13.1.0/24 are all for the city A and...

ubikrotik

ubikrotik

Maybe it should look like this ?? : new route : Dst add : 10.12.1.0/24 DG : ether-5 (where eth-5 is connected to the backup link, it's also connected to 10.8.1.20 switch) Distance : 10 Pref source : 10.12.1.2 Correct me if i'm wrong : Let say device (PC1) want to reach www.google.com : The packet wi...

ubikrotik

https://drive.google.com/file/d/0B80b4_ ... ZOZlk/view

Updated draw

ubikrotik

good let say: RT1 (at&T) RT2 (Comcast) Both RT1 RT2 have those ip add subnet : 10.3.1.0/24 10.8.1.0/24 10.12.1.0/24 10.13.1.0/24 DG for all subnet is : xxx.xxx.xxx.1 (ex: 10.12.1.1 is the DG of the subnet 10.12.1.0/24) For exemple RT1 Routes for 1 subnet : ///////////////////////////////////////...

ubikrotik

hey guys! Thx for supporting me!

I didnt set static routes with different cost. I need to read more about this. I don't know how this mecanism work.

How it works? A route with the lower cost is the prefered one?

ubikrotik

Any idea

ubikrotik

Thank you very much all.

ubikrotik

wonderfull.

But i still dont understand why switching result page show lower value :

Switching Non blocking Layer 1 capacity 37,202.4 50,000.0 5,874.1 50,000.0 2,031.9 50,000.0

thank you

ubikrotik

Hi all, I'm looking for help here in mikrotik forum. I want to make a ''simple failover system'' between 2 networks. I said simple because it's easy for you but not for me ;) Here is my draw of the simple network : https://drive.google.com/file/d/0B80b4_G1gNq2VFdRUkx0dTZOZlk/view?usp=sharing At the ...

ubikrotik

It helps. Thx

Do you mean for exemple that the crs125 24 ports can handle up to 1gbps per port at the same time?

ubikrotik

thank you.

I only need a switch that can handle enought BW.

switch need to work well with VLAN.

At the moment there is no VLAN on the network, but for future services : VoIP and IPtv we certainly need VLAN.

Thank you guys!

ubikrotik

Well, i think its buffer problem, flow control. About my littles towers: https://routerboard.com/CRS112-8G-4S-IN Is the crs112 can do the job in for my little tower? Spec sheet : 400mhz cpu and 128 of RAM. Is it enought ? What does the switching result and ethernet test result mean? And our bigs tow...

ubikrotik

Hi, I'm running a little WISP network. About 10 towers, total 300 customers. And a total BW of 600/600 Mbps at the moment. We use Ubiquiti AC gear and AirFiber and ccr1009 router at the head end. The big problem is pointing at our switchs . We use ToughSwitch from Ubiquiti and it comes with performa...

ubikrotik

You are right. I will take a look this week with more result. I'll let you know!

ubikrotik

HI, How do I read this : https://routerboard.com/RB3011UiAS-RM (at ethernet test results) RB3011UiAS-RM IPQ-8064 All port test Mode Configuration 1518 byte 512 byte 64 byte kpps Mbps kpps Mbps kpps Mbps Bridging none (fast path) 325.0 3,946.8 939.8 3,849.4 1,530.2 783.5 Bridging 25 bridge filter rul...

ubikrotik

I have the same problem when i use the mikrotik public btest. Looks like my firewall. But everything looks ok....any idea want a screenshot?

ubikrotik

Hi!

Yeah it is a 951Ui-2HnD

Yes toughswitch arnt the best . What mikrotik gear do you suggest instead?

ubikrotik

Can someone help here

?

https://community.ubnt.com/t5/Installat ... 5#U1868495

ubikrotik

Hi guys, Click to the link below : https://docs.google.com/document/d/1xXts8fpmG7ggUDzb12pbbox5aT30ADmU8G7uFBN_XAA/pub I want to manage VLAN but i'm not sure how to do. I want to creat a VLAN ID 100 for my ISP DISH on port 8 and the SFP port wich is number 9. So all the data will pass through the fi...

ubikrotik

thank you for your quick reply.

Yeah i can give you more details, what do you want to know?

The goal for the moment is to make priority on VoIP packets when other clients are using internet BW.

ubikrotik

Hi, can someone help me, we are using a ccr1009 and we want to add a QOS rule on our router to help Voip service on our network.

I saw a lot of posts on this but it looks like there are more than one way to achive that.

Step by step solution with explication will help us a lot. Thank you .

ubikrotik

Ip accounting looks like what i was looking for. Thank you sir!

ubikrotik

Hi thank you for you quick reply.

At the moment, what i want is to see the traffic of each device. I dont want to store data or do something special with that.

Regards,

ubikrotik

HI everyone, I would like to know if it's possible to see/monitor, each ''clients'' traffic on a network using mikrotik router? For exemple, I have 105 devices on a network with static ip, and i want to know the real traffic of each devices : ip : 192.168.3.120 --> tx : 12.4 Mbps, rx : 16.1 ip : 192...

ubikrotik

I advise you to read again what I replied.

That's what i've done and now it works.

haha so sorry , i read it too fast first time.

ubikrotik

not working.

system--logging--actions--syslog

remote adress should be the syslog server machine address right?

And source should be the router address?

Need i setup something here :

system--logging--actions--remote ?

thank you for your help

ubikrotik

Hi guys, I'm a new user of Mikrotik gears. I just turn on my first CCR1009 yesterday as the main Router of my tiny WISP network. I would like to know how to setup a syslog server with Mikrotik. I use Syslog watcher running on win7. My syslog watcher software is ready and listen on default por (514/u...

Search found 163 matches