So we consoled into it, which was a dead end - it asked for a login, but once entered it just went blank/stopped responding (on console). After that, nothing came up on console (not even the login prompt for further connections). Only option was to power cycle it, and it’s since come good. Going to ...

thanks for the info, worrying that it's happened but i'll try and console to it for a supout dump. hopefully just a software bug that can be patched, instead of ripping this out again

So 2 days ago we installed a pair of new RB1100Dx4 dude editions (running 6.42.1) to replace some old rb1100ahx2's, which had been running fine since installing them. That's until today, one of the units has stopped responding on snmp, ssh and winbox entirely (whilst the other is still running ok). ...

I have a feeling it's 24v, but you'd need to crack one open and check.

I previously asked this exact question and the reply was basically no they aren't releasing a DC PSU for the CRS317

CCR1072 has a DC PSU IIRC, but very expensive and overkill for what you probably will be using it for

figured i'd throw my update into here, have tested the proscend 180-T here in australia (NBN FTTN 50mb/20mb service) and works fine (using hAP ac / RB962). would love to see the ability to pull line stats out of the SFP via routerOS in the future somehow, since we don't really know how fast it's act...

From the pictures it does not look like it has -48volt input capability :( correct, but like the CCR1072 - they have a -48v PSU to go from that to 12v (as required by the CCR1072), so I was hoping that there *might* be a -48v to 24v PSU that could maybe be installed into a CRS317 (IIRC, the CRS317 ...

Hi all, I know that for the CCR range you can buy this to accept DC power directly - https://mikrotik.com/product/hot_swap__ ... or_ccr1072

is there an equivalent for the new CRS317 at all? It would be perfect for us to put a DC PSU into the CRS317.

ah sorry, was doing too many thigns at once - i meant the rb1100ahx4 dude edition

yeah going to have to try and find out from the provider I guess - yes I did see those specs, thanks. using vpi/vci 8/35, so created a vlan8 interface off the sfp but that hasn't worked either in getting sync. I've got an annex-M capable connection, so I'm wondering if that might be causing issues?

I've got one of these 180-T's also, however I'm testing against ADSL instead of VDSL - anyone else got this working? Can't seem to get it sync'ing - RB2011 picks up the sfp, and I've set auto-neg off and all, but the sfp can't seem to sync (it's entirely possible the dslam isn't supported, though I ...

got a weird question - the M.2 slots on the RB1100AHx4, any chance they could take (and the the board/software use) something other than an SSD/storage? ie, something like an M.2 LTE card?

I've noticed this too on my wAP AC I've received today - but it idles at around 65-70 Celsius with no clients connected (ambient is probably closer to 30 here), using stock PSU and PoE injector too. Hope it's within normal limits (had a quick look but couldn't find anywhere stating the operating tem...

Once que WAN WiFi is down all the internel WiFi client connected to the AP fall down and the network is undiscoverable. I'm running the wireless-rep package on my hAP-lite. What I did (unsure if this is "right") was set the radio witless interface to ap bridge with my LAN network, then cr...