Are L3 HW Offload still bug of ospf/bgp/nexthop failure or changed? I solved those issue with disable and enable l3hw or clear arp. is that fixed? I found a bug (present in 7.4.1 through to 7.7) where OSPF ECMP routes, when they return after a failure, are not loaded into the L3HW, despite showing ...

Same Here, CRS326-24S+ v7.7 with all ports connected and peak aggregate bw of 57gbps.
SNMP take long time, and the graphs missing every 3-4 hours.
Solution, increase timeout on CACTI.

Upgraded a CRS305 and CRS309 without any issues so far. OSPFv2, OSPFv3, HW L3. Just need to verify DHCP has been fixed.

Are L3 HW Offload still bug of ospf/bgp/nexthop failure or changed?
I solved those issue with disable and enable l3hw or clear arp. is that fixed?

https://help.mikrotik.com/docs/display/ROS/CRS3xx,+CRS5xx,+CCR2116,+CCR2216+switch+chip+features#CRS3xx,CRS5xx,CCR2116,CCR2216switchchipfeatures-TrafficShaping It is possible to limit ingress traffic that matches certain parameters with ACL rules and it is possible to limit ingress/egress traffic pe...

#[SUP-106898]

We running on CRS-326-24S+2Q+ with ROS v7.6 All 80% ports are used. All ports do bridge vlan filtering hwoffload. Some ports do bonding hwoffload. No L3hwoffload enabled. Aggregate traffic some around 25-32gbps. Somehow traffic rate limiter on switch chip not limiting precisely as expected on high b...

Using v7.7 on CRS.
issue still here

Yup, we had same issue here since 7.3.1. Already answered by support and there still no fix for this. We only got 300 prefixes for local networks with ebgp private AS. The issue is when your direct p2p links got rto or unreachable, there the problem started. Sometimes disable enable l3hwoffload does...

L3HW with multiple eBGP private AS still bug when one or more links goes down.
like somehow when deleting or adding prefixes not working until you disable and reenable l3hw on switch.

SUP-94904