dears ,, my problem is that i put the radius in withe ip add 192.168.100.10, the problem is the users in usermanager is work normally and appear in active users at mikrotik hotspot page, but they are not appear at A sessions or A users in userman page! also the session button on the users not appea...

Please Help me!
see the PICs.


Active user is Visible in Hotspot.


But Active user is 0 in usermanager!!!


And statistics is EMPTY!!!

Any Idea?

Anybody can help me?

Hi,

I have a problem in my usermanager admin panel.
I cannot see A users and Statistics for all Users.
Statistics is empty, its mean that all user can use traffic without any restriction and traffic calculation.
Any body can help me?

Regads
Hamed

OK. Problem area halved. It's User Manager, or it is the firewall not allowing "input" access to UDP port 1812.

YES!
I added a line in the firewall about adding port 1812, and the problem was solved.

Thanks a lot.

Test your User manager RADIUS server https://forum.mikrotik.com/viewtopic.php?t=185562&hilit=ntradping#p766812 https://forum.mikrotik.com/viewtopic.php?t=185562&hilit=ntradping#p788452 Don't forget to add the test PC to the "Routers" table. Unfortunately test result is: Status: Ti...

Looks OK. Router cannot talk to itself ? (try tools Ping, Telnet, SSH, ....) I would just try replacing 127.0.0.1 with 192.168.88.1, and also check firewall rules. Other way to debug is add Radius and Manager to the system -> logging. replacing 127.0.0.1 with 192.168.88.1 did not work. I have share...

Did you define 127.0.0.1 as "router" in User Manager ?

Hi, Please see the pics:

Please see the picture. Each time I am trying to connect, I see the message "RADIUS server is not responding." and a number is added to the timeout field.

Hello, I have a RB951Ui-2HnD, and Hostspot & user-manager is configured on it. When I am trying to connect to Router with IP address, I cannot login by user manager users (I see "RADIUS server is not responding." message), But local users of Hotspot works. Please help me. Regards Hamed

Hi,

I am using cloud service on my router to manage my router using the external IP address.
Since a week ago, I can't connect to my router using external IP.
This problem occurred automatically without any change in configurations.

Hello,

What should I do to solve this error message:
RADIUS server is not responding.
My router is RB951Ui-2nD hAP.

Please help me.

Regards
Hamed

sounds like the switch chip failed. You could try a factory reset, but I don't think that will help if the switch has failed.

So, is it a hardware problem?

Sent from my Nexus 6 using Tapatalk

Have you tried a different network cable, and a different PC?

Yes I have.
different cable, different PC and different port on router, but does not work.

Sent from my Nexus 6 using Tapatalk

Hello! I have a problem on my RB951Ui-2nD router. My router does not working! Its plugged on and it is connected to my PC via a network cable, the PWR and USR LEDs are ON but the port LEDs (1 to 5) are OFF and I cannot connect to router via WinBox. I cannot reset the router because I have many accou...

Please correct me if I have misunderstood, but my understanding is that you want to connect to the WebFig page using the External IP address? In this case, you are going to need to create an input firewall rule that allows tcp port 80 and stick it up above any deny rules Hello, Yes, I want to conne...

Maybe you don't have the IP services for www/ssh/telnet/winbox (whatever you want to use) enabled, or you
may have installed one or more "input" firewall rules that block the connection?

Hello,
Please see my firewall rules:

Maybe you don't have the IP services for www/ssh/telnet/winbox (whatever you want to use) enabled, or you
may have installed one or more "input" firewall rules that block the connection?

www service is enabled.
I think my issue is related to Firewall rules. Who can I check it?

Can you connect via MAC address in WinBox?

Yes I can.
But I want to connect to it from another devices via its IP address.

Do you have correct IP address on your PC and connected to router (ether2)? Can you ping your router from computer? If you can't, you can reset your router to default settings and then get connection to router. Router should by default have DHCP Server enabled and you get 192.168.88.254 IP. Router ...

Hello,

I cannot conect to my router via IP address and port.
What should I do?
www service is enabled.

Regards
Hamed

When it is fixed by starting torch, as you say, just turn off Fast Path in IP Settings and it should be OK.

Yes!
Thats right!
Thanks.
Fixed

How do you calculate traffic?

I am not calculate traffic. HotSpot should calculate traffic itself.
In Statistics tab for a local user, I see wrong amount for Bytes In and Bytes Out.

Hello,

Please see this screenshot.


Just when Torch is running, traffic calculates well.

what is your Accounting?

Hello,

I have this issue on both local hotspot users and radius users.

Sent from my Nexus 6 using Tapatalk

Hello,

I have some hotspot users on my router and I have a problem in calculating traffic.
I am downloadin a file with 16MB size, but the router calculate just some KBs.
What should I do?

Regards
Hamed

Hello,

I want to install usermanager package on RB951Ui-2nD (hAP). This package is not installed on this router as default.
I have downloaded "Extra packages" from http://www.mikrotik.com/download.
How I can install this package now?

It all depends on license level. That unit comes with level 4 license. So 20 simultaneous user manager users is the maximum. More info here: http://wiki.mikrotik.com/wiki/Manual:License Sent from my GT-I9505 using Tapatalk As I know, the hAP series does not support usermanager because of low memory...

Hello,

I have a MikroTik RB951Ui-2nD (hAP). Does it support usermanger?

Regards
Hamed