Hi, Using RouterOs with both Hotspot and am adding PPPoE service. Have PPPoE configured and working, just that certain websites are not working. If I switch the same PC to hotspot works fine. The websites on port 80 do not show up, but able to access SMTP on the same server on port. Traceroute will ...

Hi,

Yes it is possible. In the reply from the radius server,(reply attributes) you can specify the rate limits for the clients.

here is what I use:
Ascend-Data-Rate=512000,Ascend-Xmit-Rate=1100000

This limits client to 1Mb download and 512k upload speeds. It works very well.

Regards,
Robert Macri

Hi, No matter what DNS you use, if the dns zone files are not loaded directly from that software, it will always say it is non-auth. That is because it had to go to another DNS to get the zone information. Does it really matter if it answers non-auth? As long as the requesters get the information, e...

Hi, I have a client trieng to connect to a bank via a Nortel VPN client that uses ipsec. I use hotspot set-up for all the clients that are connected through wireless AP. I setup a 1 to 1 nat to a public ip in hopes of bypassing the firewall and letting the connection go through. When the user tries ...

Hi,

We tried that and it did not work. I was thinking of doning a one-to-one nat on a public IP. If I route all protocols for IPsec to a fixed IP that I will give the client on the LAN and Public IP on the WAN. Any ideas if this will work?

Regards,
Robert Macri

Hi,

Do you want to assign on client a public IP or all? For one client the best way to do it is via one to one nat. I am using this and it work perfectly.

YOu can find how to do it in this forum or manual.

Let me know if you need I can get the config.

Regards,
Robert Macri

Hi, I have a user that needs to connect to a banking application via Nortel VPN, which uses IPsec. I configured the rotuerOs for VPN but that did not work. Basically the client is on wireless hotspot on the MT and has the Nortel VPN/Ipsec client software to connect to the bank on the WAN side of the...

Hi,

Can it be that simple? I enable them and will have the client try the VPN.

Regards,

Robert Macri

Hi,

I have routerOS with NAT enabled for the LAN clients. What has to bge enabled in order for LAN clients to be able to use VPN on their PC's.
I have seen config for pptp for router to router , but nothing about client VPN to other router.

Regards,
Robert Macri

Hi,

I would like to know if the default page in MT can be disabled. I do not like the fact that users find the gateway address and type into the browser and get to download winbox or try to hack into the MT router.

Regards,
Robert Macri

Hi, I have a server off a wireless link through a MikroTic router. I set-up a one to one nat to acces the server, and that runs great. The problem is that users from other APs on the wireless side cannot reach the server. Tried Nat and firewall rules but no luck. From the wireless client, trace rout...

Thanks for bever getting back to me. :( Anyway I will post the solution in case anyone else runs into this problem. The problem was caused by the transparant proxy. As soon I removed this from profile setting of the hotspot, the hotspot users were able to go to the full speed of the WAN connection. ...

Hi, When I do an export, the queue does not print. If I do a print, here is what I got. queue simple> print Flags: X - disabled, I - invalid, D - dynamic 0 D name="<hotspot1>" dst-address=0.0.0.0/0 interface=ether2 parent=none direction=both priority=8 queue=hotspot-default/hotspot-default...

Hi, I have several router 500 series boards with router os 2.7.40. I have checked and all rate limiting is removed from the default profile and from the profile that is used for the hotspot. When using the hotspot, there is a maximum bandwidth of 8 Mb available to all clients. It gets split between ...

Hi, Upgrade to 2.7.40, removed the current hotspot and all profiles. Ran the setup wizard via winbox. Same problem. I logged instations, and they split the 6mb. No rate limit on any profiles and the default has also no rate limit. Add an IP that bypased the hotspot, and I get 25Mb speed. Tried on an...

Hi, I noticed that once you activate a hotspot on a Mikrotik router, there is a 6MB maximum speed limit that get imposed on all clients. I remove the hotspot from the router and I get the maximum speed of the network backbone. I tried this on a second MiktroTik that was not cofigured and got the sam...

Hi, Yes I realize that. What I am trying to do is to have a mail server on internal server able to be accessed by the outside. I have tried using one to one nat by assigning a public IP on the public side of the MT and mapping it on a private static IP I assigned to the mail server. I can access the...

Hi, I am trying to get a server to be accessed behind a Mikrotic 2.9.3. I have a /30 of public IPs available to assign directly or through one-to-one NAT. I have a hotspot configured on Ethernet 2 and Public on Ethernet 1. Hotspot works great. When I try the examples for one-to-one NAT it does not w...