My microtik is ccr1036.
apple facrime calls doesnt come or go to or from my PPPoE customers.

Whats the issue ?

we have ordered Juniper MX480 as edge and then microtik ccr1072 will be used as core router for all routing.

BGP will be done in the juniper mx480.

means no matter if its 1072 or supermicro with x86, during full routes propagation, it will still use just 1 core ?

i read in the forums, CCR1072-1G-8S+ has issues like the SFP+ ports going bad after sometime.
Is it true ?
And which version of the RouterOS, the latest is good stable or still with bugs ?

we are currently handling 4Gbps of traffic using an old cisco router, which we are removing now. we want to use microtik due to its versatility. confused what to buy, CCR1072-1G-8S+ or a supermicro server with Xeon E5 Single processor 2640v4 10 cores with 2 x 3 10G NIC cards ? The price comes to sam...

Where can i see it ?

Then you have some misconfiguration for sure, if the problem is inside the router. Have you updated the firmware too after the ros update?

No mis config. everything looks fine.

what shall I check ?

and router is lays 6.37.1

are you doing any layer7 firewall rules?

No sir, nothing!

There is such documented feature. You should search and read before you ask... The router might hang or work badly with older ros version because of possible hardware changes that were not supported previously. Rather update to newer version. updated to latest 6.37.1 same issue. bandwidth usage is ...

from all reports, till date stable version is 6.32.4 and 6.30.4 i got a ccr1009 and it came with 6.34.2 i need to downgrade it to 6.30.4 but it shows error saying omitting package. what to do ? i need to downgrade immediately, as the router has peculiar issue. the bandwdith even if if used for 3Mbps...

You can limit their usage after limit reached. If you need to show clients their stats, do not give access to router, use Ntop to show them their traffic breakdown. RouterOS supports it, using Traffic Flow: http://www.ntop.org/products/traffic-analysis/ntop/ how can ntop help here ? ntop only shows...

Solution: 1. stop using "pay per Mbyte" plans. Make an 1 Gb or 5 Gbyte download per month. Make one price. Easy for client, and easy for you. Make a website login so they can see their usage. 2. Show them the statistics of MIkrotik by going to the IP of the Mikrotik. In india, people do a...

I know.
What I mean to say, customers dont trust.
They say, show us our usage.

So, we want to give them read only account, so they can simply see their own speed, instead of calling us.

No..
I mean the read only account, so they can see their usage.

you need to define the IP i assume

a client purchased a hAp lite and I have few questions as im new to hap lite: 1. Can I save config and import the same config each time a client buys a hap lite from us ? 2. can i give read only account to my clients, so they can open winbox and see the total usage anytime they want ? 3. can i gener...

There is no password for this network, if you did not set it. To configure, connect from the laptop, not your phone, and enter http://192.168.88.1 in your Chrome or Firefox All of this is written on the box too, by the way You mean connect the ether cable directly from PC to WAP and open 192.168.1....

There is already config on it. 1) cable goes to power injector 2) injector plugs into your ISP modem. 3) wireless access point already enabled, you can connect with laptop to network "mikrotik" and use internet. 1. Done 2. Done. 3. I can see the SSiD in my iPhone, but dont know the passwo...

im new to microtik. i got a wAP box now from my friend. how do I config it ?

i switched on connected to power and one cable to pc.

but winbox doesnt show anything.

any tutorial what needs to be done ?

I ran Wireshark and it shows excessive MULTICAST IGMPv2 traffic

my network : core microtik >> PPPoE Router A and B >> managed switch NOC >> Distant POP (managed switch >> unmanaged switch >> customers I have 2 types of customers, A is wireless customers and B is fibre wired customers. so i have 2 PPPoE routers. and both PPPoE router has 1 port configured in PPPo...

hello from india, a big time microtik user. i have 2200 customers now and all are on pppoe only. My network design : Core Microtik Router CCR1036 >> UBNT EdgeSwitch >> Unmanaged and Managed switches mixed >> Customers on PPPoE. Since last few days, my customers are complaining that, they get a lot o...