We have a CCR 1036 running 6.40.5 - and has been for some months
Today we got an abuse report for this router
So clearly there is a problem at least up to 6.40.5
Can Mikrotik please respond here?

RB2011 peaks around 145Mb/s with firewall and NAT enabled while the HAPac peaks at around 170 - this is ethernet test to upstream CCR1072 at end of GPON A Fritzbox has no issue coping with this - however, I would also have thought that Mikrotik models would also do the job I don't want to be buying ...

Hi As a long term user of Mikrotik in my work - I am utterly disappointed by the capabilties of the smaller routers which are designed for the home/SOHO market. Can someone please tell me a model which can achieve over 170Mb/s on a PPPoE connection - without maxing out CPU. Surely to get this, one d...

Did not get a chance to try 6.37 - but the detailed test results on 6.36.2, both over VPLS and EOIP were terrible 64 byte packets unable to get above 200Meg on a 1Gig link - 128bytes just over 300. with nothing near the gig happening until over 512 in size This is a protocol performance issue as the...

Which RC did you use - RC32 is the most recent one on the site

Hi all
We will run our own test on Friday - upon looking at the stats when our customer was running his test, it seemed to be running fastpath.
I will keep this thread updated - hopefully this is not a hardware limitation

No we have not tried 6.37RC
I can try this build tomorrow across these two routers - everything currently on 6.36.2

Hi Wondering if somebody could throw some light on an issue we are having. We are delivering a VPLS circuit across 2 CCR1072 routers (in on one, then through a 20km fibre link and out on another). MTU size is 9100 across the VPLS link and can ping to this packet size, however when our client plugs i...