Hi, We have some Axiomtek NA-813 Desktop Network Appliance Platform with Intel® Atom™ processor N270 and 4 Gig LANs (Intel® 82583V chipset). Mikrotik Ver 3.x does not recognize any Ethernet interfaces on the system. Will these interfaces be ever recognized or we better get something else. Have not y...

Hi, We had to do a new mikrotik setup and got outselves a D946GZIS motherboard, disabled SATA in the BIOS and installed MT on FLASH, now it will not recognize the onboard LAN controller. /system resource pci print detail 0 device="04:08.0" name"unknown device (rev: 1)" vendor=&qu...

try to put a ds-nat rule in firewall so that everyone is forced to used the web-proxy for all outbound port 80 (http) traffic /ip firewall dst-nat add dst-port=80 dst-address=![ip of your mikrotik] src-address=[ip pool of your clients] protocol=tcp action=redirect to-dst-port=[port number on which y...

hi, we are running about 15 mikrotik's all ver 2.7.20 which we found to be stable enough to handle more than 700 pppoe clients per machine, My problem is that recently at a lot of places where the mikrotik is connected to a switched lan and the lan itself is extended around the whole block via other...

Can you tell me how to upgrade the firmware inside the senao bridges... and the error from MT 2.8.18 on bootup is... Prism firmware loading: skipping, too old primary where as the prism firmware inside of MT shows up as the following ... interface-type=Prism firmware="1.0.5/1.2.0, compid 0x800c...

On upgrading to 2.8.18: the logs show : Prism firmware loading: skipping, too old primary Interface Info: /interface wireless print Flags: X - disabled, R - running 0 R name="wlan1" mtu=1500 mac-address=00:02:6F:03:16:E1 arp=enabled disable-running-check=no interface-type=Prism prism-cardt...

hi, im facing the same problem, only diff, im using a point to point link, prism card 200mW
Earlier were using MT 2.6 earlier, with exactly the same setup, without any problems for almost a year. The machine is an AMD. other side we have a senao wireless bridge. distance is +/- 10Km
support.rif sent