Hi

Try dst-host: *.*rapidgator*.*
action : allow

Hi all I have tried and tested the following access rules to allow access to the website: dst-host: *.*advancedvoice*.* *.advancedvoice*.* *advancedvoice* When I try to access the website the counter registers hits, but still get the gateway timed out error. I then tried doing a tracert route from t...

Hi I have been having the following issue with the web proxy on a RB2011UiAS, where the web proxy is set to allow access to certain sites, and deny access to others, sites such as google, news etc are allowed, sites such as general social media are denied other sites offering updates are also denied...

hi Nichky,

You mentioned that you don't have traffic, does that mean that you cant access the internet?

Hi

You could be create an output rule, to allow Winbox traffic from one RB Device to another.
Is Neighbour Discovery enabled on the devices?

this is part of my setup for one of my RB751s: /ip address add address=172.56.55.1/27 interface=ClientNet /ip firewall filter add chain=input action=accept connection-state=established comment="Input Accept Established" add chain=input action=accept connection-state=related comment="I...

goodness, ..would be 192.168.1.1/27, where network address=192.168.1.0, address of ether5 would then be 192.168.1.1
the firewall rules would still be the same.

in a theoretical setup, ether5 would be my private LAN(192.168.1.0/27) and ether1 would be my WAN connection.

hi Have you tried adding rules similar to these, to your firewall: add chain=forward action=accept src-address=10.20.1.0/24 dst-address=10.20.0.0/24 out-interface=ether2 comment="Forward Accept Mikrotik2" add chain=forward action=accept src-address=10.20.1.0/24 protocol=tcp dst-port=8291 o...

yes, you could modify the rules to be similar to the following: add chain=input action=accept src-address=192.168.1.0/27 protocol=tcp dst-port=53 in-interface=ether5 comment="Input Accept DNS - LAN" add chain=input action=accept src-address=192.168.1.0/27 protocol=udp dst-port=53 in-interf...

hi What sort of traffic are you trying stop, TCP/UDP ? You could create Firewall rule to drop traffic to this port. UDP and TCP Port 53 are used for DNS requests,etc So you could create a rule to only accept these DNS requests from your specified src-address, on a specified interface,(one for UDP an...

hi

Have you tried updating to v6.37 or v6.37rc42 ?
Also after updating(including the firmware), try to completely power off the device then power it back on.
Then test/check if you are able to connect/configure.