My RB2011 is connected to a CRS226 with access vlan & trunk ports. As in the RB there are a lot of 129.X IP, i can see a lot of broadcast in the CRS on all connected ports. I can't see in each interfaces what happening in, and also for the 129.X IP on the CRS. What i see on the interface list is...

As you said, the traffic can't be catched by firewall forward / input / output rules. It doesn't show in torch. I tried to disable pppoe client for wan, rebooting the router, the connection still exist (from 129.X IP to IP of gateway or clients in network). I have also a pptp server for VPN, then in...

To detail a bit more : - On the top of network I've 2 DSL link with mangle in LB mode (ECMP) on a RB2011 - 1 trunk port with 5 VLans in RB 2011 going to a CRS with access ports & trunk port corresponding to these vlans. All 129.0.0.X IP talk to clients in all vlan and network device on the same ...

To illustrate these packet & conection:

Hello, I'm exactly in the same case. I've weird 129.0.0.vlanid packet broadcasting inside the vlan. Sometimes when users need more network ressources, the flow can gros as the consumed bandwith. Sometimes i had above 10Mbits/s or 20Mbits of weird traffic. It doesn't get caught by firewall and not vi...

Hello Thank you dude that'ok. I'm sorry for the late reply. If inside a vlan, i want a computer reach internet on the other gateway, what's the way t do this ? I tried to mark the routing for this host via mangle, masquerade it, or did a dedicated route, but it's always reaching by his "default...

Hello Thank you for your response, we gonna check this until a new week start

Best regards

Hello All, First post on this forum to have some advice. We're actually implementing mikrotik as an internal router, managing some vlan on a trunk then 2 pppoe-client. Each vlan as assigned isp and some vlan must speak between them. Consedering this setup : http://wiki.mikrotik.com/wiki/Manual:Inter...