Finally, CAT6 UTP solves the problem with 9 of 10 gigabit ports, but one of them, 5th port, peforms negotiation process for about 5-10 seconds and finishes with 100mbit link, don't know how to diagnose what the problem with this port.

RouterBOARD RB 3011 UiAS-RM Firmware: 3.27 RouterOS: 6.36.3 Hi. My 3011 can't establish 1000mbit connection through it's gigabit ports with dlink dgs-1210 or with my dl380 g7 server. By the way if i connect them directly (dlink --- dl380), gigabit link works. So i'm sure that i use true gigabit por...

RouterBOARD RB 3011 UiAS-RM Firmware: 3.27 RouterOS: 6.36.3 Hi. My 3011 can't establish 1000mbit connection through it's gigabit ports with dlink dgs-1210 or with my dl380 g7 server. By the way if i connect them directly (dlink --- dl380), gigabit link works. So i'm sure that i use true gigabit por...

Good day! Have the following problem, there is a mikrotik rb2011uias-2hnd and two ISP's with static ip connected to ether1 and ether2, ether3 master-port, ether4-5 slave, ether6 master-port, ether7-9 slave, ether3 and ether6 in birdge. When i connecting a PC with gb network card to ether4 speed dow...

RouterBOARD RB 3011 UiAS-RM Firmware: 3.27 RouterOS: 6.36.3 Hi. My 3011 can't establish 1000mbit connection through it's gigabit ports with dlink dgs-1210 or with my dl380 g7 server. By the way if i connect them directly (dlink --- dl380), gigabit link works. So i'm sure that i use true gigabit port...

I'd say you're not looking at the same packet

Hi, thanks. It's clear to me now. Restart solved the problem, it looks like new NAT rules didn't work before i rebooted it. I can't replay the bug, i have added new VLAN interface and SNAT rules to it. Everything works fine.

Oops, sorry, I didn't look carefully, my aswer was complete nonsense. I'm trying to do better job now, but I don't see any obvious reason why wouldn't the second srcnat rule work. Is the config really like this, or is it maybe a little too simplified? Are there perhaps some other rules in nat table...

RouterBOARD RB3011UiAS-RM Firmware: 3.27 RouterOS: 6.36.3 Hello people. There is a network as described on scheme: L3 (1).png /interface vlan add interface=eth5 name=vlan2 vlan-id=2 /ip address add address=4.4.4.4/24 interface=eth1 network=4.4.4.0 add address=192.168.1.1/24 interface=eth5 network=19...

Only option is to reboot the router as far as I know. You can steal safe-mode away from a user though. http://wiki.mikrotik.com/index.php?title=Manual:Console&redirect=no#Safe_Mode Thanks a lot. Pressing Ctrl+X in terminal solves my problem. It forces getting lock, asking me what to do: unroll ...

RouterBOARD RB3011UiAS-RM Firmware: 3.27 RouterOS: 6.36.3 I have 3011 routerboard, which can't enter Safe mode today. It says " Could not enable Safe Mode - safe mode already held by somebody ". rb1.png This error appeared after winbox have died a couple of times on my Windows 10 machine. ...