MikroTik

MayestroPW

It would be great to have option to nest docker in a docker, or at least have an option to mount /var/run/docker.sock

MayestroPW

7.2.rc3 the same

MayestroPW

7.1.2 and 7.2rc3 -- the same problem.
It's basically unusable at this point.
Is MT doin' something about it? They have to fix it ASAP.

MayestroPW

Everytime I open a new Winbox .viw file it increases the scaling.
I'm using custom scaling in Windows 10 = 115%

MayestroPW

Same problem here.

MayestroPW

How do you determine that fasttrack is not working fir you? Is it that facttrack counters don't increment or is it the lack of performance? Both. Either way, your bridge/vlan setup is a mess making CPU to push the same packet around just too many times. I strongly advise you to redo the whole VLAN ...

MayestroPW

Hello, For the past 2 years, I've been struggling to get FastTrack working in my config. Problem is that FastTrack is not working when you have a router-on-a-stick configuration with each VLAN in a different bridge. I don't know why is that, but it is really annoying especially when you want to send...

MayestroPW

+1
I hope we will get it someday, with an option to specify multiple protocols, or at least TCP and UDP, so we will not have to make two rules for services like DNS which are using TCP/54 and UDP/54.
And it would be great to have the ability to specify multiple port lists in Filter Rule.

MayestroPW

Hello,
I think, that IP Address to DNS name resolution for Torch and Connections tracker in Firewall would be very useful for many.
There could be an optional switch to turn in on or off when needed (Winbox).

MayestroPW

MayestroPW

Guys, you have to use static virtual interfaces in caps settings. It's not gonna solve all of your issues, but at least it will let it work.

MayestroPW

I directly connected RB2011 with RB912, disabled every interface, besides those which you can see in the picture. Then set up only one Wireless interface(wireless1 on RB2011) with VLAN Tagging 221. That wireless interface is part of bridge "bridge0-ban1"(trunk) on RB2011. Then connected on...

MayestroPW

Right now I have only two exports. From RB2011 and RB912. Config of the third one(hEX) is quite big, so I will attach it tomorrow.

The problem occurs even with just two of them connected directly.

UPDATE BELOW

MayestroPW

This is not a problem. Like I said earlier, host table contains both mac-addresses.

MayestroPW

Sorry, my bad.
I thought that pictures in the first post show that clearly.

MayestroPW

I know how bridge/switch supposed to work. The problem is that this is a unicast traffic, not broadcast nor multicast.
The bridge has both mac addresses in host table and it still floods whole bridge.
When I connect my PC to that bridge I'm receiving that whole traffic as well.

MayestroPW

Sorry, I could not reply earlier.

I attached more detailed pictures of my setup.
I really don't know why this is happening. Surprisingly, this situation does not occur on different bridges, only on the first one(trunk).

HEX-1.JPG

HEX-2.JPG

RB2011-1.PNG

RB912UAG-1.PNG

MayestroPW

Sorry, I could not reply earlier.

I attached more detailed pictures of my setup.
I really don't know why this is happening. Surprisingly, this situation does not occur on different bridges, only on the first one(trunk).

HEX-1.JPG

HEX-2.JPG

RB2011-1.PNG

RB912UAG-1.PNG

MayestroPW

HI there,
I don't know why, but my bridge is acting as a hub. It floods every port in the bridge with packets. As far as I remember, I always had that problem.
RB2011UiAS-2HnD-IN

p1.JPG

hEX PoE connected to switch2\ether5

p2.JPG

Is this normal, this is how it should work? I hope not...

MayestroPW

Hello, Right now I'm using 3 MikroTik's, which are connected together. Two of them are working as APs, and one is CAPsMAN. In total there is 4 networks, 1.JPG and every network has it's own Virtual Access Point in CAPsMAN. They are connected to the same bridge - bridge0, then there is VLAN tag on ev...

MayestroPW

So nobody knows how to restore that backup?

MayestroPW

I don't have passwords at all.
On the previous config, I had accounts with passwords, but it's not working when I'm typing them in.
Previously it was working, I was able to restore backups which were not encrypted, but right now I cannot.

MayestroPW

I don't have admin password because it's new config. On old config I didn't have a password either, I just set "allowed address" for an admin account.
My backups are not encrypted

MayestroPW

Hi, Recently I updated my hEX to 6.40.5 and it stopped working. I had to do a netinstall to recover it. When I wanted to restore a backup I found out that I couldn't. I tried different backups, from different periods, and none of them are working. I even tried different rOS verions(6.40.3, 6.40.4, 6...

MayestroPW

You think that this discussion has a video and needs to be blocked? It has the word video all over the place. That would be no false positive for you? Of course when you access a site over https there is no match with the actual word video in the content, on the other hand it could trigger on any o...

MayestroPW

For me this regex works fine: videoplayback|video works fine for youtube and every other online video stream even HTTPS, besides live streams ofc. It will work "fine" only when you do not count the massive false positives. It will hit on any packet with the word video in it. False positiv...

MayestroPW

There is still a problem within hotspot directory.
If I set it to:

/disk1/hotspot/hotspot1

It will be automatically changed to:

/flash/disk1/hotspot/hotspot1

MayestroPW

Thank you for replay.
In 6.39rc72 they added the Interface List option to PPP Profile, so I will not need that script anymore.

*) ppp - added option to specify "interface-list" in PPP/Profile;

However, thank you.

MayestroPW

Hello, I have RB750Gr3. I uploaded my hotspot files on Disk1 on USB pendrive. When I select the path for that folder in Winbox it just adds /flash folder before it. Example /disk1/hotspot/hotspot1 It will change it to: /flash/disk1/hotspot/hotspot1 A similar problem is with SMB. When I add /disk1 sh...

MayestroPW

Is there any possibility in future, that we could set other modes in cap settings than ap mode? I wish there was a station mode...

MayestroPW

When I start background scan on cap it tells me: failure: background scan not supported in this state I ran it from cap router, not from capsman router. It will be only supported from the CAPsMAN side. Then how to run that scan? UPDATE: Ok, I found scan option, but need to add some channels to list...

MayestroPW

When I start background scan on cap it tells me:

failure: background scan not supported in this state

I ran it from cap router, not from capsman router.

MayestroPW

*) capsman - added support for "background-scan" and channel "reselect-interval";

How does background-scan works? In winbox I still can't run background scan on capsman interfaces.

MayestroPW

Как теперь делать кольца на уровне vlan ?

Раньше все это прекрасно работало.

This is english speaking forum only.

MayestroPW

Hello, I have a problem with PPP Profile up/down script. Up script is working fine, but down script doesn't work. Up: /interface list member add interface=$interface list=LAN Down: /interface list member remove numbers=[find where interface=$inteface] As you can probably, I am trying to add dynamic ...

MayestroPW

YouTube uses QUIC, which uses UDP not TCP protocol.
For me this regex works fine:

videoplayback|video

works fine for youtube and every other online video stream even HTTPS, besides live streams ofc.

MayestroPW

Nope. It was possible to added slave interface on CAPsMAN (controller), but you could not add slave interface locally on a CAP (managed board) itself. It appears to be possible now. When you connect CAP to CAPsMAN virtual interface on CAP becomes disabled. I just tested it, and it works same as 6.3...

MayestroPW

As I understand, now you should be able to create child (virtual) interfaces under the physical interface that's being managed by CAPsMAN. I have not tried it myself yet, though.

That function was already

MayestroPW

capsman - added support for static virtual interfaces on CAP;

What it means?

MayestroPW

+1 that would be great

MayestroPW

I read it already and upgraded all of them to 6.38.1, then to 6.39rc25. Problem appeared on both versions.
I use Vlans on that bridge and those vlans are bridged to ethernet ports etc. So, as I understand, I can only use RSTP on my first bridge/trunk?

MayestroPW

same here

MayestroPW

I'm dealing with the same problem. I have a RB2011UiAS-2HnD-IN, but it doesn't matter, the problem occurs on every RouterBoard I have(RB951G-2HnD, RB750Gr3, RB941-2nD, RB912UAG-5HPnD, and many more). I tested it on every RouterOS since 6.30. I don't know how to deal with it.

MayestroPW

+1 awesome idea!

MayestroPW

+1
I would love 802.11r/k/v support.

MayestroPW

I'd rather to keep firewall like is now.

MayestroPW

Because my firewall blocks traffic which is not coming from LAN and going to the WAN.

MayestroPW

Actually i'm using this, but I don't know how to code it.

MayestroPW

Hi there, I have a problem with MikroTik. I need to make a script which adds my dynamic interface from PPTP to interface list when user connects, but I don't know how the script would look like. /interface list member add interface=[find interface=<pptp*] list=LAN MikroTik creates dynamic interface ...

MayestroPW

+1

MayestroPW

I have the same problem. ROS 6.37.1. Firewall Filter: clear, NAT: clear, Mangle: clear, Arp Reply-Only: ON, DHCP Add DHCP for Leases: ON. I don't know what causes the problem.

MayestroPW

Hello there! I have problem with my network. When I turn on hotspot, MikroTik's firewall detect my local traffic between devices in the same interface. In bridge I have WLAN and Switch. Bridge Use IP Firewall is OFF. Interface IP: 10.1.0.1/22 Hotspot IP: 10.1.0.2 Device #1 IP: 10.1.1.1 Device #2 IP:...

Search found 52 matches