does RB951 have a real time traffic monitoring? wherein i can see each host what are the website that they open, bandwidth usage, TCP/UDP protocol etc... i am currently using kerio control and trying to learn Mikrotik. in kerio control... i can see each host what are they trying to access. but in mi...

interface > ethernet tab >

scroll across and check master port and switch columns (15 and 18)

you have also set arp?

i'll check on this

Try masquerade src net lan also?

I think since ur ether4 is disabled its not receving dhcp to ur lan on ether4 for internet access

i have done that but no luck.
i even try 192.168.50.0/24 as a src-nat for bridge
adn
192.168.75.0/24 as a src-nat for local ether3

http://wiki.mikrotik.com/images/c/cc/Check_nat_masquerade.png I think this is what he means but i feel its either a dhcp / ip address / or firewall issue. Do you know how to make an address list, i would put all my local ips in a list and manage all from there, i have the same setup as the picture ...

Hello,

Try to add a NAT rule to masquerade traffic comming from LAN to any.

Andrei

any? do you mean not to place anything on out-interface?

what could be the problem why LAN cant connect to the internet. but WLAN has no problem connecting to the internet

In the picture does it look like the local ip pool starts 89 positions prior to the address list starting points

Bridge -> port ( ether4 and WLan )
Local-Bridge: ip pool = 192.168.50.11-192.168.50.199

Ether3: ip pool = 192.168.75.101-192.168.75.150

In the bridge window also ether4 says disabled..

it says disable on mikrotik because i disconnect my ethernet cable from port4/port3.

then enable my wifi, connect to mikrotik wifi to access the internet again.

Check your interfaces. Are some marked as slave to another port? With out of box config, ether3-etherN is slave to ether2. ether3 is not slave to ether2. before i add some configuration. i reset the config without default config. i really dont know what mess up. host connected to ether3 and ether4 ...

Are you connected eth4? Does the computer receives the dhcp ip? Bridge > port has two interface. ether4 and wlan i am recieving DHCP ip address if connected via ether4 and WLAN. host connected via WLAN has no problem browsing or playing online games. host conencted via ether4 has no internet connec...

can someone please enlighten me why i have no internet over LAN. but connecting to internet via WLAN (wifi), i have no problem at all. connecting to ether3 or ether4 has no luck connecting to internet https://s28.postimg.org/50mum9j71/no_internet_over_LAN.png # dec/23/2016 23:37:02 by RouterOS 6.37....

ip address for WAN2 added. but still the same.

anyone?

ding

by the way im using
RB941-2hnd
OS version: 6.37.3

Good day. can some please enlighten me what to do to fix this issue. Host that are connected via LAN port (ether3 and ether4) dont have an internet connection. Host that are connected via WLAN do have internet connection without any problem. below is my config /interface bridge add auto-mac=no mtu=1...

scenario 1. ISP modem/router -> DHCP ON Mikrotik -> DHCP ON (default) WIFI host have internet connection LAN host dont have any internet connection (static IP 192.168.88.254 or DHCP.) LAN have internet connection (static IP: 192.168.0.254) mikrotik cant ping host connected to LAN but can ping host c...

none of the settings was change after "System -> Reset Configuration" Keep user conf: uncheck No default conf: uncheck Backup: uncheck this is really weird. # dec/12/2016 00:09:21 by RouterOS 6.37.3 # software id = 84HT-B23A # /interface bridge add admin-mac=D4:CA:6D:C2:9C:F2 auto-mac=no c...

on the default config

bridge -> port
ether2
Wlan

Interface
ether3 -> master port -> ether2
ether4 -> master port -> ether2

Good day. i have a RB941... i having so much difficulty about his router (that i believe the problem is so much basic.). the problem is.. host that are connected via wifi do have internet connection. but host that are connected via ether 2,3 4 don't have any internet connection even they do have IP'...

Good day. im having trouble with my rb951G-2hnd i have 2 ISP and it says reachable (IP->routes) LAN (ether3) also says reachable (IP->routes) Problem 1: Failover not working when i unplug WAN2, there is no internet connection at all. (does it mean it has no fail over?) if WAN1 is unplug, i still hav...

ding!

2 WANS Main Wan (Wan1) 10mbps DL - 1mbps UL (this is the main wan because it has a better stability) Secondary WAN (Wan2) 25mbps - 4mbps UL (this is the 2nd wan because i encounter a random restart of ISP provider..) online games are priority to WAN 1. online games will only use the WAN 2 if WAN 1 i...