MikroTik

krystian

ax2 has maximum 80MHz channel? Not support 160MHz? But on UPC router Wi-Fi 5 I have 500 Mbit/s… You don´t need 160Mhz to get more than 500Mbps as you can see below: Speedtest-from-LAN.pngSpeedtest-from-internet.png Screenshot from 2022-10-19 21-36-40.png jookraw Give me your Messenger or What's Up?...

krystian

Where can I tuning it?
You talk to me phisicaly orientation?

krystian

I checked and speed is the same...

cut2.png

krystian

Ok
Please help me why I have slowly speed on my ax2 router...

krystian

Hello I have a hAP ax2 router from today and I am a bit disappointed. I have a UPC 750/200 Mbit link and on the UPC router I get speeds of about 500 Mbit / s over Wi-Fi 5. I connected the ax2 router to it and configured it for Wi-Fi 6. On the iPhone 13 speedtest I only have about 250 Mbit / s. I als...

krystian

When I start doing speedtest, the tx rate drops to 600/600, not 1201 Mbps.

cut1.png

krystian

I'm about 3-4 meters from router. In the same room. Now I jave this config: # oct/19/2022 22:06:59 by RouterOS 7.6 # software id = NAHX-XSTS # # model = C52iG-5HaxD2HaxD # serial number = <CENSORED> /interface bridge add admin-mac=18:FD:74:BB:9E:5D auto-mac=no name=bridge /interface wifiwave2 set [ ...

krystian

ax2 has maximum 80MHz channel? Not support 160MHz?
But on UPC router Wi-Fi 5 I have 500 Mbit/s…

krystian

I have a hAP ax2 router from today and I am a bit disappointed. I have a UPC 750/200 Mbit link and on the UPC router I get speeds of about 500 Mbit / s over Wi-Fi 5. I connected the ax2 router to it and configured it for Wi-Fi 6. On the iPhone 13 speedtest I only have about 250 Mbit / s. I also test...

krystian

I have UPC 500 Mbit download, 30 Mbit upload. On UPC ConnectBox 5GHz I have about 450-500 Mbit / s download speed. After connecting RB4011iGS + 5HacQ2HnD and setting the UPC modem in modem mode I have about 300 Mbit / s download speed. My configuration looks like this. Can I improve something to get...

krystian

Which wlan interface are you using? Maybe you can share your setting here and someone might help you to fine tuning it. My experience with Audience is max speed 480mbps with my iPhone 11, interface wlan3(5G2), average speed is 400mbps and low speed is sub 300mbps. I currently don't have Audience. I...

krystian

Has anyone tested MikroTik Audience on a 500 Mbit or larger internet connection? I currently have UPC 500 and on their ConnectBox I pull 5 GHz 450-500 Mbit on MacBook Pro 2020 after 5GHz. I used to have Audience for a bit but I managed to get max 250 Mbit which is strange because the router has very...

krystian

If you are just using default setting, you are most probably using 5G1, and it's managed by CAPsMAN, 5G1 is slower + CAPsMAN is slower, result in much slower is reasonable. Set the wlan3 to AP bridge, set basic rate to 12mbps and 24mbps, supported rate from 12bmps to 54mbps and connect to it, you w...

krystian

You never have optimal speed with default settings. Default setting is "some" configuration for a hypothetical environment, and for "some" concept of interconnection. How is the Audience connected to the Connectmox? Wired or wireless? Audience has 2 separate 5 GHz radio's, which...

krystian

Hello For several days I have an UPC 500 Mbit optical fiber connection. On the ConnectBox router from UPC to WiFi 5GHz I have a nice speed of 450-500 Mbit / s, and after Audience only 200-250 Mbit / s. I'm using MacBook Pro 2019. What could be the reason? Do I have to configure something in MikroTik...

krystian

I tried different settings but all the time I have max 75-80 Mbit/s.
I don't know why...
I went with the Macbook next to Mikrotik and all time I have the same.

Wired connection I have 98-100 Mbit/s.

krystian

I check and I have about 75-80 Mbit/s all time... I don't know why...

krystian

I don't have 5GHz networks in my area so I should have about 100 Mbit/s wifi speed no problem... I check it when will be in home, thanks.

krystian

Such a connection should 100 Mbit/s without a problem like that?

krystian

Yes, now the settings are correct. If it still goes wrong, try changing the width or channel (frequency).

Ok but 20/40/80 Ceee will be good?

krystian

Turn off auto frequency. Select fixed channel, e.g. 5180 MHz.
Don't use 802.11a mode if you don't must. Set n and ac.

It will be ok?

https://i.postimg.cc/zf3WNZ4D/4mt.png

krystian

Bring it further away. Try other wifi frequency in settings. Make sure you have all 3 chains enabled.

This is my 5GHz configuration: https://postimg.cc/gallery/1rjz2x9u6/

krystian

I have Mikrotik RB962UIGS and wifi speed problem. My connection WAN is 100 Mbit/s and cable LAN speed is OK about 98 Mbit/s. I have my MacBook Pro 13 2017 connected to this Mikrotik 5GHz and my connect is good condition. I have max only 75-80 Mbit/s I don't know why... my MacBook I have 2 meters fro...

krystian

I know but wired connection I have 100 Mbit/s no problem.
Wireless I have to about 70 Mbit/s max.

krystian

Normis help me please

I think whether to change the router for another one...
I can give You access to my Mikrotik and can You look?

Maybe this is problem Mikrotik with Apple devices?

krystian

This is not a reliable way to test anything, but in any case, make a screenshot of the connection information in wireless "registration table" when you do this speedtest. So we can see the signal and noise data.

Ok please look: https://postimg.cc/gallery/gp0j4kvw/

krystian

This is not a reliable way to test anything, but in any case, make a screenshot of the connection information in wireless "registration table" when you do this speedtest. So we can see the signal and noise data. Ok I do it about 5pm. I does it yesterday and i had about 500 Mbit remember...

krystian

How did you get that speed? Try iperf3 between two computers, instead of simple file copy. I don't have other 1Gbit computer. But WAN speed (5GHz wifi use) to my computer should be 100 Mbit/s no problem... I don't know why is only 70 Mbit. Like I asked, how did you test this 70Mbit? I'm connect to ...

krystian

How did you get that speed? Try iperf3 between two computers, instead of simple file copy.

I don't have other 1Gbit computer.
But WAN speed (5GHz wifi use) to my computer should be 100 Mbit/s no problem... I don't know why is only 70 Mbit.

krystian

We have tested 700Mbit between two Macbook Pro computers, through this router. We used iperf3 for testing. So where Can I have problem? I have 100 Mbit/s WAN and wired connection no problem... and 5GHz a/c 70 Mbit/s only... I see "registration" in MT 500-866 Mbit/s. Maybe must I set any i...

krystian

I haven't other 1Gbit hardware.
But i need capacity to my computer

About 70Mbit/s is max speed on this model Mikrotik?

krystian

Ok but I can do about 5 pm.
I have default configuration wifi 20/40/80 MHz Ceee.
I don't know why is this problem.
This model Mikrotik will be no problem 200-300 Mbit/s 5GHz yes?
2 meters to router.

krystian

please post an export of your config. please use a wired connection and retry dslreports what are your wireless conditions ? distance ? number of walls ? type of walls ? number of active clients ? Wired connection has 100 Mbit/s no problem. I have empty freq 5GHz about my home - 0 walls and router ...

krystian

So where is a problem?

krystian

My wireless config https://postimg.cc/gallery/1l93b0w1o/
DSL reports I have about 78 Mbit/s

krystian

Hello I have a RouterBoard RB962UiGS-5HacT2HnT hAP ac and I have wireless capacity problem. I have WAN 100 Mbit/s and MacBook Pro 13 2017. All is 5GHz connection and in registration I see 866 mbps... but I have only 70 Mbit/s WAN speed MAX. What can be a problem? Channel width I have 20/40/80 MHz Ce...

krystian

I have IPSec tunnel between Mikrotik RB952Ui-5ac2nD and Stormshield SN300. Tunnel is established but transfer is very very slow. I don't know why... I check algorithms sha1/aes256, sha1/des etc... transfer is slow all time. Maybe can I set some option in my Mikrotik? Please help me fix it. https://s...

krystian

Now phase 2 try connect but I don't know why algorithms are none.
I have set sha1/aes256 all both sides.

krystian

I have a problem with IPSec tunnel on my RouterBoard RB952Ui-5ac2nD. I try connect IPSec with UTM Stormshield SN300. All option I set ok, encryption is the same but established only phase 1. Phase 2 I don't see connect in log file... What can I do? I must set NAT or firewall on Mikrotik? https://s22...

Search found 39 matches

Re: hAP ax² dual band Wi-Fi 6 (802.11ax)

Re: Mikrotik hAP ax2 wireless speed problem

Re: Mikrotik hAP ax2 wireless speed problem

Re: hAP ax² dual band Wi-Fi 6 (802.11ax)

Mikrotik hAP ax2 wireless speed problem

Re: hAP ax² dual band Wi-Fi 6 (802.11ax)

Re: hAP ax² dual band Wi-Fi 6 (802.11ax)

Re: hAP ax² dual band Wi-Fi 6 (802.11ax)

Re: hAP ax² dual band Wi-Fi 6 (802.11ax)

RB4011iGS+5HacQ2HnD wifi throughput problem

Re: Audience throughput wifi problem

Audience throughput wifi problem

Re: MikroTik Audience slow speed WiFi, why?

Re: MikroTik Audience slow speed WiFi, why?

MikroTik Audience slow speed WiFi, why?

Re: Mikrotik RB962UIGS wifi speed problem

Re: Mikrotik RB962UIGS wifi speed problem

Re: Mikrotik RB962UIGS wifi speed problem

Re: Mikrotik RB962UIGS wifi speed problem

Re: Mikrotik RB962UIGS wifi speed problem

Re: Mikrotik RB962UIGS wifi speed problem

Re: Mikrotik RB962UIGS wifi speed problem

Mikrotik RB962UIGS wifi speed problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

RB962UiGS-5HacT2HnT hAP ac capacity problem

Mikrotik RB952Ui-5ac2nD - IPSec transfer problem

Re: RouterBoard RB952Ui-5ac2nD IPSec phase 2 problem, help me!

RouterBoard RB952Ui-5ac2nD IPSec phase 2 problem, help me!