Hi @janus20 and sorry for my little late response. Here is the result of my MikroTik router ping: $ ping 192.168.1.45 Pinging 192.168.1.45 with 32 bytes of data: Reply from 192.168.1.45: bytes=32 time=5ms TTL=64 Reply from 192.168.1.45: bytes=32 time<1ms TTL=64 Reply from 192.168.1.45: bytes=32 time...

Yes... I will make those tests tomorrow, now is a little bit late.
Thanks again, you are very kind and helping me all day long.

Hi @janus20

The speed is more or less the same with "20/40 Ce".
The mode is set to "ap bridge". Should I change to "bridge" or not?



Thanks!

Thanks again @janus20 for your response. I just managed to change the "Interface" of 192.168.88.1/24 from "ether1" to "bridge" and now the router is transmitting internet via WiFi. Here is a close look. https://s15.postimg.org/i4j636ex3/mikrotik.png Also WebFig is worki...

@janus20 I have entered the lines you have send but nothing changed. Also here is the result from firewall: [admin@MikroTik] > /ip firewall filter export # jan/01/2002 01:12:07 by RouterOS 6.37.1 # software id = 6YQ7-BXJA # [admin@MikroTik] > And the password wasn't chaged. It was the same from earl...

Thanks @janus20 for your response. I will make these changes and I will write later after them.
I just want to avoid 192.168.1.1 address since this IP is using other router for LAN network. I will stick to 192.168.88.1.
Is this okay?

Thank @Rudios for your response too. Now I am not having any IP inside the WiFi network. I was only able to change the subnet mask to 255.255.255.0/24. Here is a close look of other windows. https://s21.postimg.org/4tm9xny43/mikrotik1.png This is example is being loged via WiFi but only with WinBox,...

Did you put your computer lan into same range as mikrotik?

So put manual IP address on your PC like 192.168.88.5, you will be able to access router than.

Thanks @ivicask for your response and advice, but unfortunately that didn't work.

No one can give me a help?

Hello folks, I'm a new user of MikroTik routers and I need some advice for WiFi configure. This is the model: https://routerboard.com/RBwAP2nD Earlier I had some issue with entering into the router via WinBox and I managed to solve that with netInstall installing again the routerOS. Now I am not abl...

Reset works always. The device should behave like new out of the box. Are you sure the reset was really done? If no go, the netinstall is the last option before the rma.

Finally I had entered my router with netInstall.
Thanks a lot!

I am holding the reset button on the router and still nothing changed.
How much long should I keep the button pushed? I was holding about 10-20 seconds.

edit> And also on the browser I am not receiving the login page. "The page cannot be displayed"

Thanks @jarda for your response,
I already did that things. I am not able to connect with cable and also I had reset the router.
Nothing changed.

Hello folks, I'm new here in this forum and I'm really glad. I am having maybe a basic issue but since I'm new customer in using these MikroTik routers I didn't find the way to connect to my model RBwAP2nD . I used WinBox and 192.168.88.1 via browser but still cannot login inside the router. I was h...