MikroTik

djape

Guys, change power adapter before anything else.
It happened to me many times and each time was faulty power adapter.

djape

Unfortunately, I don't have time as I am on a vacation with my family, enjoying. Knowing that Mikrotik is not and open source but commercial product, I find rather inconvenient that Mikrotik doesn't test products in various environments.ou I've reported a bug, you should not expect your customers to...

djape

More news, bridge protocol-mode setting to stp will work for OSX devices, and wireless, but Ethernet will mostly lose packets. If you set to rtsp, all devices but OSX will work fine. This is totally crazy and almost unbelievable that Mikrotik never detected this before. This is reproducible 100% on ...

djape

Was celebrating too soon. Though wifi works now on OSX devices, other devices on Ethernet interface are dropping packets, ping stats are 50% packet loss.
Whatever it is, it has something to do with bridge interface and STP/RSTP setting, so I would like to draw attention to Mirkotik devs.

Thanks.

djape

I know it is old topic, but after many hours of struggle with 2 MacBook Pro not being able to get IP, complaining about IP already used by another device (when it's not) I was able to solve the problem by changing protocol-mode from rstp to stp: /interface bridge> print Flags: X - disabled, R - run...

djape

Thank you for prompt reply.
Please update WIKI.

Thanks.

djape

Same problem. I read on Wiki and Forum here, bought TP-Link TL-WN722N and RB751U-2HnD, spent money for something that is not working for me now. As and old and faithful Mikrotik user I would appreciate if someone can answer. Idea was to have small soho route which I can use to extend signal in hotel...

djape

Hi uldis. My configuration is as follows: RB433 (mipsbe) R52hn wireless miniPCI card (connectors and rubber antennas attached properly - after 8 years I know that much) Desktop (10 of them) connected to TP-Link 1gbit/s 48-port rack mount switch. 2 latops, one with 965 a/g/n Intel wireless card and o...

djape

P.S. on 5.0 i have problems with wireless, but on 4.17 - almost everything is allright. I can confirm this. I was having very poor performance on 5.x Once I read this and downgraded to 4.17 I'm getting around 25mbit/s on 2m distant AP. I except more, but hey, this is great comparing 7-8 mbit/s with...

djape

Come on folks, you are asking too much from MT.
These are SOHO products and are not produced nor designed to push X number of gbit/s.

For this, there are product which sost $$$$$ and it's not for nothing.

Cheers...

djape

Thx for #3

and for NAS, yes, it could be done that way, but that is one more computer in the house, and I have a mikrotik router
sitting there at 1-5 % CPU usage

so why not giving him something more to do.

Cheers and thx for the reply.

djape

Hello folks, have are you all? Didn't come here for quite some time, to be honest, didn't had a reason, everything is working great! I think after 5 years of using Mikrotik I can say that it is the best option whatsoever ;) I would like to suggest three features that could be very popular. Feature N...

djape

When you say 10 gigabit/s Ethernet card, what kind of connector it uses? RJ-45 or something else?
Thx and Happy New Year all.

djape

Hi all, I wonder do other experienced problems with DNS Cache. I have 4 routers as main network gateways in different countries (version 2.9.51) and from time to time they will stop resolving domain names. When I "flush" DNS cache everything is normal again... There is one more issue. From...

djape

Wow, thx so much for this...cheers...

djape

It's just simple noise problem, it's very hard to resolve that. When I can't resolve noise issues I just replace atheros with prism and my problems are gone. It is true that atheros have better performance, but when it comes to noise and "dirty" enviroment it's performance is disaster. If ...

djape

Some solution for messaging as we use "fake" device and write messages instead of its name.
We have 4-5 admins watching The Dude all the time and it's pretty cool to chat over Dude when there is a problem on the network.

Cheers...

djape

there is no way to reset admin password. If you forget the password and not able to login, you must reinstall router from scratch...

djape

not all ar5212 support 2312-2732

linksys wmp55ag is atheros 5212a chipset but didn't have 2.7ghz

just hunt all 5212a cards, especially from proxim b/g cards, they're all using atheros 5212a

Completely agree

djape

I have a card that supports 2312-2732 and it works without problem. The card has Atheros chipset AR5212 manufacturer is Pheenet and model number is WL-54PCIA For some reason Pheenet removed all info concerning this card, there are links on google but pdf files are removed from their site. Good luck ;)

djape

Believe me, there are folks that are changing both mac and ips :) Arp-reply is great option, but can't protect you against intruders with a little more knowledge than average user. To start using radius server on over 1000 wireless nodes network at this point would be very painful... So adding arpwa...

djape

Hey, I would like that very much!

Thx for suggestion

djape

Hehe

Thx for sharing this useful info with rest of us.
I wonder...is there a way to spread this thorough the atmosphere

djape

I have some issues on many APs when atheros radio will stop working (no packet/s - no bandwidth). Simple disable then enable solve this problem. I thought that periodic calibration do something similar, but unfortunately I never figure what is calibration doing or does do anything at all. Off topic ...

djape

SR2 - no amp is best solution. If you use amp, users will have strong signal, but noise will be enormous and surfing will be worst then on dial-up. Why? Answer is simple, you will hit your clients with 3W and they will have great RX , but their TX will be killed... I'm sorry but you just spent your ...

djape · I'm happy to say that this is fixed in 2.9.35 Cheers folks

I'm happy to say that this is fixed in 2.9.35

Cheers folks

djape

Thx normis, I have never doubt that you guys will find the problem

Keep up the good work

Cheers...

djape

It's 2.9.34
Never used 2.9.31 but same thing is on 2.9.28 which I used before upgrade. I can't recall in what version this problem was introduced. But it was few months ago, and I try to upgrade regularly.

djape

use NTP to keep the date and time on the boxes. Then you don't need to manually go in and reset the date and time if the box gets rebooted. Read more carefully, he don't have problem with system time. Problem is start date in scheduller. I have the same problem. If I set system current date schedul...

djape

Ok, supout and exports from scripst and scheduler are sent today.
I hope you guys will locate the problem.
Thx...

djape

Hello, I use schedullers big time. Few months ago I have posted a problem with scheduller not exectuning at all. Somehow I tried everything and found that scheduler is working if I change start date to current (which leaves me to change it every morning). It was not a big trouble cause it was just a...

djape

I have set mtu on nstreme intarfaces to 1530 and I can use 1500 mtu now on customer side

stupid me...
Well, I thought it's better to ask if somebody else did it, then to try it on live link. Anyhow it's working...Cheers...

djape

Hi all,

I use nstreme on point to point link and my nstreme frame limit is 3200.
beetween MTs mtu 1500 works fine, but on customer side max mtu is 1470.
How can I continue using nstreme and have 1500 MTU at customer size? Is it possible?
Any info is most welcome, thx...

djape

Well done MT, keep up the good work!

To all: as normis said, this is called BETA, which means it should be used for testing purposes only. Anybody who's willing to test and submit observations and bugs is most welcome as it will help in developing RouterOS.

Cheers all...

djape

@ cibernet I completely agree with you man! This forum is becoming larger and larger and lately we don't even write about RouterOS. You guys must understand that this forum is about Mikrotik RouterOS, not about basic networking! As cibernet said you can google for questions like this... @jober While...

djape

Same here...

djape

Hi all, I'm wondering if anyone else have problems with ntp clients collecting time from ntp server. Sometimes it sinchronizes the time and sometimes not. I have this problem on 50% of RouterOS. Main Router is set to be ntp server and there is no problem, but other Routers have problems and there ar...

djape

Miko, that's awesome :) I'm glad for you guys. If I understood, PC from inside the house with small antenna attached to wireless card was getting 4mbit/s with no LOS. I also have license for 2.4Ghz and 5ghz and I wonder is it possible to get license for 900Mhz. Pls, if your willing to talk drop me a...

djape

djape

Well, I don't think card is going to 1000mW

but for sure stations are getting stronger signal. What we expirience is 3-10 db gain on all our AP's.

Cheers...

djape

What chipset is on this Planet card?
If it's atheros it should work without problems, but Planet also uses Marwell chipset which doesn't work on MT.

Cheers...

djape

you can remove it manualy from Services and put it back again yourself.
Very simple...

Cheers...

djape

ip firewall nat >

add chain=srcnat out-interface=ether1 action=masquerade

Cheers...

djape

It is possible with basic knowledge of networking...everything else is in manual...

djape

I was carefully reading your posts and can comment that 16 cm9 card can work without any problems at all. My solution for good bandtest (links) is to set tx-power to 17 and then try btest. If you are in situation where you must you full power because of weak signals try setting the other link (uploa...

djape

Why the hell you need virus scanner? That way you could lose control of what's going on in router!
I hope MT guys will not take this request in to consideration.

Cheers...

djape

If you see the diagram of an omni you will see that it is like an umbrella
When you are exactly under the omni you get almost nothing but if you get 200 meters away you will get a very good signal.

Agree, signals will just go over your head. Pack your things and test from a distance...

djape

Last two weeks I'm sending every morning my tech guy to check temperatures on two of my critical Routers. They are in very big heat and cpu temp is high. It would be very nice if I could see it from MT directly instead of going there each time.
Thx...

djape

So, is there a chance for adding that or no?

We need some kind of messaging on Dude...

djape

Hi all,

It would be very nice if it is possible to add "shoutbox" in Dude client.
Currently we are using device box to chat

We have a big network and few admins at the same time administering it, so many times we use this type of chat.

Thx in advance

djape

Can confirm that prisms are working ok with new wireless packages (not legacy) Current version 2.9.26 works fine.

Cheers all...

djape

Sound nice...
Maybe in Sofia...
Djape i have some proposition for killing time in Sofia... http://www.realxxl.com
...jeaaa

Hehe, cool...

djape

Visa is not required for all eu citizens.

I was thinking for Non-Eu citizens, like Serbia, Bosnia, Nigeria lol

djape

I have RB532 with 4 CM9 atheros miniPCI cards through daugterboard, working without problem. Two cards are in ap-bridge mode and two cards are in station mode. Traffic load is about 2mbit/s and cpu usage ~50% sometimes reaching 100%, but I do not worry about that :) I can't remember is it 18V or 48V...

djape

Sounds nice, there are many folks from non-EU contries that would like to come and to get VISA is much easier

Cheers...

djape

Listen mate, this is definitely not RouterOS problem but rather on your provider side. Try setting established tcp connection timeout to 01:00:00 (1 hour) instead of 5days or whatever is set in you router. This will release established connections and free more space. I suspect your provider! Cheers...

djape

well u must use somekind of quality antenna like Hiperlink and not that crap from Netiks

Sharane

djape

Good config Mr djape

but aint worked

I know, it ain't gonna work as server is serving on port 6500. I was just giving example...

djape

its PCMCIA with PCI adapter...

djape

You're right, it should work that way. I did something simillar in the mall and can confirim that right choice of antenna is most important.

djape

cpu c666

I think it's all about 666 number

djape

Everybody can help, but you need to give some info about what kind of connection you have, what card, antenna you are using, what's the signal level etc.
We can't help you if you just cry

djape

I have 2 installations on FM radio towers. On both installations I have the same issue as shielder, when radio is off i have 10db better signals then when it on. On one installation where FM radio is using 2KW booster I can't make atheros to work at all, tried all known atheros cards, sr2 too. Prism...

djape

I think we should make are links better so p2p would not be a problem.
We will never win this war, maybe few battles but war no

Cheers...

djape

What about the Compex WLM54G? Anyone here used these before or have any opinions?

I used it and wouldn't recommend this card, furthermore I wouldn't recommend any Compex product. Bad signals, too much noise...

djape

Ok, first rule was to forward everything that is coming from 219.83.12.146 to 192.168.11.5 port 6500 so firewall rule was accomplished and it will not go to second rule! Understand? The only way it can work is like this chain=dstnat dst-address=219.83.12.146 dst-port=6500 action=dst-nat to-addresses...

djape

...but my ISP sad if ping works it is not the line problem. Thanks

Not necessarily true, they maybe blocking all traffic except known one (21,25,53,80,110, icmp etc) so you cant access particular ports.
You should check with them, but first make sure that your config is ok.

Cheers...

djape

Ok, this is cool 0 ;;; masquerade hotspot network chain=srcnat src-address=192.168.0.0/24 action=masquerade 1 X ;;; masquerade hotspot network chain=srcnat src-address=192.168.0.0/24 action=masquerade 2 X chain=dstnat in-interface=ether2 dst-address=0.0.0.80 protocol=tcp action=redirect to-ports=808...

djape

Try putting tx-power to default or even 17, you'll get lower signal but much better performance. Inform how did it go

Cheers...

djape

What version and license level you guys are using, this info with 5-10mhz channels can't be seen if you use older versions....

djape

Why do you have masuarading rules for same network? 0 and 1?
Field 2, why is dst-address=0.0.0.80 what does that mean?
Field 4 you should set dst-address=!192.168.0.1

I never noticed that DNS cache is lost after reboot...

Cheers...

djape

It's not a router issue! It's a problem with concurent tcp connections you can use over satellite. When you disconnect router you also kill established tcp connections (free) and when you connect laptop your net is going fast. These satellite links are not ment to be used for a lot of users, just fe...

djape

Good I dont use routing-test. The routing package seems to be working ok. I hate this.

OFFTOPIC:
Dude, why the hell did ya put same avatar as me

You bring confusion

djape

Hi there, RouterOS DNS cache can help a lot :) There is a firewall rule that can intercept all DNS request and redirect to DNS cache ;) ip firewall nat > ;;; intercept all DNS requests chain=dstnat protocol=udp dst-port=53 action=dst-nat to-addresses=x.x.x.x to-ports=0-65535 (where x.x.x.x is addres...

djape

I would say its postively a good signal.

I saw that also and it's not good signal. Good signals are minus (-) something not possitive.
This could be just that winbox went crazy

djape

You should use some Virtual Domain software so you can build 100's of sites behind only one public IP.

You can check http://www.swsoft.com for Plesk

Cheers...

djape

another problem, as soon as data is being transmitted the connection drops. if nothing is transferred the connections works fine.

This has to be signal/noise problem.

What's the signal strength tx/rx?

djape

If in your country regulations are allowing, you can also use custom frequencies. Offcourse you need to buy license from MT to be able to use it...

djape

It's ok to use nstreme but you'll need faster CPU then the one rb532 has in order to reduce ping time...

djape

If it's not config problem, then most probably it's noise. As I written before atheros is very sensitive to noise and prism is not. It's tested and there is no doubt about it. Check what's causing the noise and if you can't help it just switch to prism. Keep in mind that prism can't handle the traff...

djape

Can you do print and post it here?
Otherwise I don't have a clue for what are you asking help.

djape

Must say something! Why the hell did you write that you're nervous?! Just be relaxed and RTFM!!! Everybody should do that! Maybe 90% of forum members or even more. I'm using Mikrotik Router OS for more than 3 years and all I can say it's the best thing it could happend to all providers!!! Low cost g...

djape

I swear that this is the last time I'm writing this :) Omni and cm9 is duyin' on stormy weather! Prism doesn't have that problem! So, try using sector or panel antennas if you use cm9. It's just the problem with the omni antenna design. You can't do anything about it, it's the way it is. Let me gues...

djape

Wrong? Well, you typed too much letters, to be honest. I really didn't have time to read all of this what you have writen! TO ALL POSTERS: Try not to write long question, simply give some details about config and then say what's the problem! I don't think that people that can help need to know what ...

djape

Well, does this laptops use Mikrotik RouterOS?
If not, most probably that this is not the place to ask for help

Cheers...

djape

-40 is too good to be true :D @ normis @ taloot Now, two cents from me: Mikrotik is fine OS and properly configured it can do much more than regular AP's. High pings are caused by noise so check for interference or use prism cards which are not that sensitive to noise as Atheros, but consider that ...

djape

But we have to regulate Tx power on our country..

I understand, but setting tx-power to 10 is not gonna work, everything bellow 17 will not work properly.

Just my two cents...

djape

CM9 works better than prism, but it's very sensitive to noise. CM9 can process a much bigger traffic than Prism. Then again as jober said, the best solution is to use SR2. I usually lower the tx-power of SR2 cards and they work great. You can always order SR2 on the net so supplier can send them via...

djape

Hm, just leave tx-power default...

djape

The easiest way to connect wifi card to any supported frequency is to set scan-list=default,2467,2472

djape

In my case scheduller will show count as everything is ok, but never executes.... This happened from 2.9.17 and even now on 2.9.20 is the same. Yesterday I did system reset and did router from the begining, still the same... It's simple p2p connection script to enable and disable firewall rule. Main...

djape

Ok, I just decided to set all of my scripts to start-date=dec/31/1970

Yes but I have problem with time, for date I don't care. I have scripts that needs to run on specific time of the day and now I have problem doin' it manually

Cheers...

djape

This is problem with your internet link. Mikrotik, mangle, QoS etc. can only help you when you have good internet link and want to share it among users with priorities etc.
Give us some more info, how many users, what's the capacity, what restrictions you have on your isp....

djape

Same thing here, I'm having problem with NTP and schedulles.
Not firewalled but still not updating time, making problem to schedulles.
Generally it wouldn't be a problem but rb532 after each reboot resets the time...

djape

Does this mean even if I limit customer to 128kbit/s he will have biger speeds while using encrypted bittorent?

djape

I have found 16 as optimal limitation...

djape

it's 10AM his time no night here

djape

I have found tool graphing making CPU at 100%
After turning off graphing everything is fine. This was on all MT's we have. version 2.9.18.

djape

I did it manualy, just open start up folder and paste shortcut to dude.exe and that's it

Cheers...

djape

It is important that you have some fonts in your ~/.wine/fake_windows/Windows/Fonts or whatever whatever directory you are using for windows. msttcorefonts package on debian contains some of windows default fonts And if that still does not work you may want to run 'regedit' on your wine computer an...

djape

Confirmation dialog box when disabling interface(s) in winbox.

djape

Let me report that we find anoying that dude rc4,rc5 and rc6 is asking as to update to version rc3 (whis is installed as a server)

:D:D

Cheers Uldis and keep up a good work

djape

There isn't such a option as I know...

djape

hmm, thx for feedback.
I'm a bit confused as this is brand new rb that I just upgraded to 2.9.17 and was not overloaded, only difference is that it was from rb532 to wrap2.c client.
I'll try later some other combinations.
Anyhow, wanted to know is it just me or is it a bug

Cheers all...

djape

Hi all,

I have noticed in version 2.9.17 that if you start bandwidth test it wont stop, only solution is to restart rb...

Does anybody else noticed this?
It's rb532 with 2.9.17.

djape

150 users on 3 prism cards is way to much!

Try changing to CM9 atheros cause Prism can't process kind of traffic that 150 users can produce...

Cheers...

djape

Add this rule in ip firewall filter :
add chain=forward protocol=tcp tcp-flags=syn,!fin,!rst,!psh,!ack,!urg,!ece,!cwr connection-limit=17,32 action=drop
This will limit each user to 16 concurent TCP connections.

Cheers...

djape

Check here http://www.mikrotik.com/download/CHANGELOG_full

Cheers...

djape

Well, it hapends to me on two PCs. One was rebooting without proper shutdown because it was to cold for him, I placed blanket over and everything is fine - I hope I'll not forget to take it out when warm weather comes :D Other one had Power supply problem, I just changed it and this one is ok also. ...

djape

add chain=srcnat out-interface=PublicInterface src-address=192.168.0.2/32 action=src-nat to-addresses=64.65.66.211 to-ports=0-65535 I have noticed by your post that you use version 2.8.x Check if it's latest 2.8, I mean is it stable... I hope you didn't post your real addresses :D If yes, my advice ...

djape

Hell... no! :) i will be happy if Dude could generate a full screen HTML page of the map I choose, and that it will be viewable in users browser. So, no IP addresses, passwords, editing, nothing! :) Just nodes, their names and traffic between them. You mean something like live streaming of dude map...

djape

Just configured Dude for the very first time, entered all our network nodes. I love this software :) I would like to make our network map public via http to all users, and it will be nice to have fulscreen mode of map in browser. Please, add this feature! :shock: Don't do that, god knows what one o...

djape

See what's written in the log and paste it here and as HarvSki said is it RB or PC...

djape

I'm repeating like parrot

Don't use amps, they are just giving you higher signals but bigger noise also.
Amps are not cheap, so spend that money on more AP's, if you need more coverage, do mesh network....

djape

we fixed it. you could say that RouterOS is the first program to detect and drop this `super encrypted` azureus traffic

2.9.14

That's good news...

djape

nice one

djape

@ wisp

zema3ema at yahoo dot com

djape

Hi MT,

Just 2 hours ago I have upgraded from 2.9.12 to 2.9.13 and I can say it works great.

djape

License to spy now is officially canceled

They disabled scan feature in the demo routers

Hehe, James Bond, next time don't tell every little secret you know

djape

My dude keeps lossing all its settings. Its only done it since .92 version.
Help.....

I'm having this issue since beta 19...

Config is simple, just watching what is up and down...

djape

You can try with filtering mac-addresses in ip firewall. Allow only customers mac-addresses and drop the rest.
Other solution is to limit number of concurent conections per ip, so even if they share, they will not be happy and you can explain them that it's due sharing violation rules

Cheers...

djape

No, it should work accross NAT, customer just need to have both src and dst nat configured (public address). If he is masquaraded, then it can't work.

Cheers...

djape

@djape Do you want to say that masquerade works better than src-nat regarding torrent clients? I mean are there any differences between chain=srcnat out-interface=link action=masquerade and chain=srcnat out-interface=link action=nat to-addresses=x.y.z.w in this manner? I know other differences betw...

djape

Sorry conchalnet, somehow I missed this thread but it's never too late. Here is how I do mangle for MSN (that doesn't mean it's correct!): add chain=prerouting protocol=tcp src-port=1863 action=mark-packet new-packet-mark=MsnMSG passthrough=yes add chain=prerouting protocol=tcp src-port=1863 action=...

djape

4 cm9 cards work without problem!
2 SR2 cards are maximum for RB532!
I never tried two SR2 and two CM9 in RB532 so I can't give you any advice about that configuration.

Cheers...

djape

Hmm, your rules are wrong if you ask me. You must be sure that this is the only port. I would do it this way: ip firewall mangle > add chain=prerouting protocol=udp src-port=3830 action=mark-packet new-packet-mark=voice_buster-in passthrough=yes add chain=prerouting protocol=udp src-port=3830 action...

djape

Very cool offer

djape

How about more information about your link capacity and MT configuration?

djape

you can also configure automatic support.rif in system watchdog...

djape

Glad I could help

Cheers mate...

djape

Thx for reply.
I'll wait for new version cause I can't take chance with unsecure connection. I'm not paranoic, I just had very bad expirience with intruders.

Cheers...

djape

Well, 3m dishes from both sides, SR5 and if you get 6 mbit/s you should be very happy...

djape

No!!!
You should even go lower with power, but 21 is ok for me...
Everybody here looks for power, I look for quality signal...

djape

Even then! I have same antennas, they work on horizontal polarisation and one is on channel 1 and another on channel 11, but these kind of antennas also give a hell of a signal behind its back. First you should try is to set TX power to 21 on both antennas. And if this doesn't help, then try separat...

djape

well, didn't inderstand you well, sorry

Glad you make it...

djape

Why don't you do simple queue and the print graphs from tools > graphing?

djape

You should have at least 3 meters distance between these two antennas!!!

Frequencies are mixing and this is why you have noise...

djape

Look at the mac-address in registration table and then go to "ip arp" and there you can see which ip address belongs to which mac-address...

That's it, unless you want name of the customers and phone number

Just kiddin'

djape

There must be something wrong with your setup, you should give some details.

Cheers...

djape

Hi pekr, You have 1 mbit/s and 8 users. This is what would I do: set limit-at=64000/128000 max-limit=128000/256000 for each user This way, if all of them download/surf/p2p at the same time they would have guaranteed 64k up and 128k down. If they don't to that at the same time they'll have 128k up an...

djape

Hi uldis, I have problem with new version 0.91. Every hour or two dude clients are being disconnected, this was also issue with other betas, 19, 17 as I recall. Is it possible to configure client so that after disconnection client detects it's being disconnected and tries to connect to Dude server a...

djape

Well, if understand you well, you want to give 256kbit/s to be shared with 8 users? It's no a good idea at all. I am usually givin' up/down ratio 1:2 (128k up and 256k down) so queue would go like this: add name="user x" target-addresses=10.0.0.x/32 dst-address=0.0.0.0/0 interface=all pare...

djape

I wanted to say that he should just use masquarade and torrents will work without any problem for as much pc's as he want- nothing more.

djape

Well, with the queue you posted here you are setting speed for whole 10.0.0.0/24 subnet all together. If this is not what you wanted you should put 10.0.0.x/32 and so on or use PCQ. I prefer to use wireless-default for wireless interface and I made customers queue type pfifo 10 packets... If you wan...

djape

As I remember D-Link G510 has atheros chipset, so it should work without problems, but not 100% sure.

Cheers mate....

djape

You should set gateway for the clients on the local interface, that is 192.168.0.1 and dns should be and dns should be any working DNS...

djape

5 metter only? maybe wrong antenna jack?

Totally agree

djape

Hey dot-bot, you wanna fight with me ?

djape

Why can't you just upload a web-proxy package and reboot?
After that you can configure transparent web-proxy and do redirection in dst-nat.
Someone correct me if I missed something.

djape

It's all in the Manual, but I'll post example anyway. Let's assume your gateway's address is 10.0.0.1 and you configured web proxy on port 3128 and set it to be Transparent (ip web-proxy) Now you should add following rule in ip firewall nat : add chain=dstnat dst-address=!10.0.0.1 protocol=tcp dst-p...

djape

Beta 19 supports traffic graphs, you can download it from here

http://www.mikrotik.com/download/dude-i ... beta19.exe

Cheers...

djape

Well, at least we can block port 6881....

djape

You should just redirect all traffic to port 80 to proxy, everything else should be going without proxy...

Cheers...

djape

Did you try Add/Remove Programs Uninstall Dude?
And then install again?
Btw, I also found new version loging endessly, so I rolled back to beta 19...

djape

Well, this is going to be a nightmare....

djape

Well, in 90% of my AP's I use cm9, but on 10% I must use Prism.
It's the way it handles noise.
I am not saying it is best option, but it was only solution for me...
So, you can try to solve problem with Prism, or wonder about cables, channels etc, your choice....

djape

Hey!

You can use torrent with masquarading only!

So don't touch anything as I said, I NEVER said he should block those ports...

djape

Hehe, well done cibernet
I couldn't help im better

djape

Well it was my friends problem, but he gave up and bought one more pheenet.
So actually i don't know details.
Good luck...

djape

He is trying to make upload on torrents to work faster

Don't worry about stupid torrent clients that offer you to test connection, just leave it as it is....

Cheers....

djape

OK, your problem has nothin' to do with RouterOS.
Try puting prism card!
I have few instalations where Atheros was facing noise problems which Prism didn't feel...
Most probably you have very high noise issue!
Do that and tell us results.

Cheers...

djape

You don't have any bridge or somethin'???

djape

Also, check if there is any p2p activity, if yes "drop" it....

djape

djape

I used ip arp print, and get no data

Then there is something wrong with the cable or card. If you are sure that everything is ok then do this:
Add static apr entry
enter mac-address of 192.168.1.2 pc and which interface

Cheers...

djape

Could you give us some more info?
Check ARP...

djape

Yeah, post more details about your config.
Why do you think MT can't deliver?

djape

Well, there's no challenge in your setup exept of time that nobody here has. Everybody in here is ready to help, but nobody will do complete setup for ya. The best way is to open the manual and try it yourself and when you are stucked, then post some questions. That way you'll have complete control ...

djape

Then there is something wrong with the hardware...

djape

I know this will sound crazy, but try by adding routerboard package. You need to reboot (it will still hang) but after you confirm that routerboard.npk is there it should reboot without problem from know on...

djape

Hi acim, thx for invitation ;) I am not a member but I'll do it right away. I am talking about 802.11b. CPU can't help here, it's a card actually the one that can't process a lot of connections, packets/second. As cibernet wrote it depends what kind of traffic you have. So basically number of associ...

djape

Why do you complain?
60-90% ccq is better then 10-20%
You don't like your wireless to have good ccq?

djape

simple queue you can, but queue tree no...

djape

how about secret keyboard keys to reset password? We had problems with hacking are boxes and intruder changed passwords. We were forced to install boxes again :( Can you implement this so upon installation I should be asked for my secret button (something like ctrl+alt and any key I want) to reset p...

djape

You must allow udp 53 also or how else will you users resolve domain names?!

djape

Awesome

djape

@nowoxi and ucheonyeaka

I was two years in Nigeria, Abuja, now WAO

Listen, if you placed amps for connecting with laptop from 1km distance then I don't know what to say except that 802.11b is just not technology that's gonna do work for you.

Cheers...

djape

You want to forbid access to these ports on your network from outside?

djape

I can say for associated clients there's no limit, but over 50 performance becomes very bad...

djape

And live radio stations support

Little joking wont hurt anyone I hope

djape

Also check are you using b/g mixed mode or g-only or b-only...
Check are basic rates set to default...
Try changing frequency...

djape

No, 5413 does not support turbo, at least it didn't support for me

djape

Unless you bought some high quality booster my advice is to get rid off it! Try it and you'll be surprised that quality of you Internet is going to improve. So many times I was writing about boosters. They'll give power but also a lot of noise and sensitivity of the card will become very bad. So, wi...

djape

Sir,

it can be done with 2m dishes and nstreme2.
Any other solution will cost you a fortune.

Cheers

djape

This depends of clients connection quality. If there is no traffic on that AP and client has a good signal you should get arround 5mbit/s. If you want to transfer data between two clients on the same AP you should see at least 2mbit/s cause you'll send 2mbit/s and other client will receive 2mbit/s m...

djape

djape

MUM was great :) Yes, you need to configure magle and queue trees! As last guru said, you can't just mangle only msn or whatever, it's important to mangle rest of the traffic too. Example msn, CoD, half life, voip, http etc and for each queue to set priority you want. Then also you can add rule for ...

djape

Great recommendation!
It will be helpfull with wireless. Sometimes ap-bridge interface will have noise etc. issues and it takes time untill you notice that something is wrong.

Cheers...

djape

Just go to connection tracking and reduce Established TCP connections from 5 days to 1 hour. It works great for me...

djape

Yeah

I'll think about that. I think those bugs are bringing me luck.

I kinda started to like them

Cheers..

djape

Don't worry about insects, I found dead spiders and some unknown organisms inside MT last year, they are still there cause I didn't want to touch it

That MT still works without problem

Cheers...

djape

What do mean? There is a login form on the page just type your usename and password and your in.

Cheers...

djape

OK, so You want both p2p and all other traffic?

Then mangle p2p, limit the bandiwidth and priority to 8 in queue tree.
For MSN do magle, change TOS to 16 and give priority 1 in queue tree.

Cheers m8

P.S. Did you replace prism card?

djape

Hi folks,

I don't have problem using Ipsec between MTs or between to Pheenets BIG-01/4VA, but this MT to Pheenet scenario is driving me crazy.
Can someone confirm that it can be done?
If it can, I'll post my configs so any help would be great.

Cheers everybody...

djape

It must be at the end of the world

djape

Completely agree.

If I can do everything from the begining I would do everything with MT.

There are several reasons why, like custom frequencies, nstreme...

Cheers...

djape

I would like to say something, but I can't cause I also produce boxes

It wouldn't be fair.

djape

Let me see did I understood...

You have to dsl lines for internet and you have one lan interface to your Local network?
You want to use two subnets on Local network, so one will go through one dsl line and another one will go through another dsl line?

djape

Do you have routerboard packages installed?

djape

If you change cards and problem is gone, could you tell us wich one u use?

Cheers...

Search found 465 matches

Re: System rebooted because of kernel failure

Re: Apple devices won't connect

Re: Apple devices won't connect

Re: Apple devices won't connect

Re: Apple devices won't connect

Re: TP-Link TL-WN722N and mikrotik does it work?

Re: TP-Link TL-WN722N and mikrotik does it work?

Re: r52hn speed problem

Re: r52hn speed problem

Re: 10G compatibility/performance with Mikrotik?

Re: Three cool features - low resources

Three cool features - low resources

Re: 10G interface.

IP DNS cache problems

Re: Wireless disconnection messages explained!

Scheduler problems - attn. MT support

Nstreme and customer MTU value drops to 1470 max

Ntp and scheduller problem

One feature suggestions!

Re: :)

Re: the value is so large

Re: Ping works, telnet, winbox, webbox don´t

Re: dropping connections as soon as data is transmitted

Dude update

2.9.17 and bandwidth test

Upgrade from 2.9.12 to 2.9.13

Re: Dude major issue.

Dude clients disconnecting, need feature...

Re: great problem by cm9 on g

Ipsec between Mikrotik and cheap Pheenet BIG-01/4VA router