7.16.2 - For dual capsman on a Hap AX3 which driver do I use? wireless 7.16.2 arm does not give the wireless menu. Is there a link that bests explains the radio drivers and the file naming conventions. I have wasted days trying to get Capsman to work. It's a lot of trouble and has wasted days of life.

Found a temporary workaround elsewhere in this topic.
Delete the Device and Redo .. !!!! No more crashes... . works long enough to change the name where the program is useful.
What a shame.

* BLESS YOU... * This has been a disaster. taken off years of ones life . I would gladly pay for this program if it was supported.

We have some devices just say Device (Not responding - Spinning Circle) in the client in 6.47 when you click on the device in the map and the menu on the right is missing. Other devices work fine. The client is locked up and when you X the device it says dude is not responding requiring a restart. A...

We are having issues with the Powerbox Pro in simple bridge mode. Router mode is as expected. Bridged ethernet ports don't pass traffic.
Other MT devices can't see the updated devices in IP Neighbors with discovering ports = all.

Forced to downgrade AP's to 6.46 ... confused on ways to reduce radio power (20ce) Interference from NV2 caused other radio-controlled heavy equipment (cranes) to malfunction.
downgrade to 6.46 says testing. need clarity on actual ERP for NV2.

Is there a way to have a New device name use the System Identity? This way you would have a useable map immediately?
Also is there any guide in managing ROS device passwords using the dude or other tool?

Solved-I changed the winbox port on the edge router. Not sure why this would have killed the service to devices on local subnet?

When I upgraded ( I think 6.44) ALL devices went from Green to Orange due to Routeros management timeout. This used to happen when Password was not correct. Does ROS management use the same ports as winbox? 10 days ago I did something to stop ALL Dude 6.44 ROS Management Responses. ROSManargment is ...

My Bad - I had a Rouge DHCP/Server Power Box on the same Broadcast Domain/IOT Bridge I found the variable in the caps-man export and it sets as expected now in 6.44. It would be great if anyone with experience would enlighten us on hints of what devices expect with the group key update setting best ...

I'm using CAPSMAN and set Group-key-update to 01:00:00 and have had no luck with 2 doorbells. aes and WAP WPA2 on with now a shorter 8 character password. No issues connecting with any other device. Anyone else have experience? The device says has a problem connecting to the Internet. Seems like its...

Does anyone know of a Recent Post for VPN IPsec PSK config??- W10 Clients to ROS 6.43.11+ Fixed IP+4011? I gave up with many gray hairs and I even hired a Mikrotik consultant without success so far. This Essential Functionally is so easy on other devices. Id like to use the Standard windows client. ...

It's clear this is not ideal, but Can one take a dual band WAP or hAP and link 5 gHz NV2 and re-transmit on 2 gHz. 40 Mhz channel on 5, 20 on 2Ghz.
The range on 2Ghz so low due to congestion. 5Ghz band is open. want to also NAT, band limit and firewall on the radio,

Disable FastTrack fixed all, in both IP settings and Firewall rules. Fixed all issues with 6.43.11 so far.
I'm confused on possible changes affecting IPSec if any?

Forced to drop back to 6.43.8 on RB4011. Not stable and drop in routing performance with some CAPS and VPN issues. May have been script specific. Not sure how to downgrade once you update the Routerboard FW. Lucky I had a new spare 4011 in box, EDIT: Disabling FastTrack fixed all... Thanks !! I'm no...

Hmmmm
Error is "input does not match any value of datapath.bridge"
Bridge name was exact same on both devices.
I took out all datapath values and it imported successfully

Trying to move Capsman settings to a different device with mixed success. Looks like only some of the config is sticking on import. Possible mac addresses conflict. /caps-man export then import the best way to do this? If you have dynamic interfaces should you edit out/ remove the /caps-man interfac...

Any experience or advice with QUAD 9 DNS ? Subnet is IBM's.
https://www.quad9.net/#/ - Discussed on Steve Gibson podcast "Security Now"
POP map at pch.net/about/pops - similar to Norton , perhaps lower fat and oversite.

Where might one find frequencies for newer radios locked on US3 bands?
Are separate caps-man configurations required with existing and new US3 locked radios
even with the same bands?

Guide lines for providing dual Radio Devices? I assume you want a separate provisioning entry for each band. Are new provisioning rules necessary for the latest UnitedState3 radios? Or can the Country just not be set since the radio won't select off bands anyway? I'm using custom configuration and p...

Have a 2011 we want to bond a SFP port to an Ethernet port with out the router interfering. If you set both ports to Master=none, create a custom bridge, and don't have any IP's on these 2 interfaces will the router do nothing to or with this traffic? Basically, I just want to electrically isolate a...

Have a 3011 with a single Public WAN address via a /30 provided by Fiber provider Southern Light. Hosted VOIP supplier "CSPIRE" must have a dedicated connection with public IP so we have a new address assigned ( /30) which I have added to the WAN facing interface and it can now be pinged f...

Using a group of 5 port router as a SWITCH , with an admin IP is assigned on the Bridge via DHCP, should "add default route be active in DHCP client" be set to ON ? Same would go for a SXT in station bridge. Would one be better off assigning a block of /32 address on the same subnet ( not ...

Dude on Hexr3. MT devices running 6.38 .5 ( soon 6.30x ) Is it OK to run DudeServer rc .. or should I stick to the same Dude server as
on all the networked devices. Any issues with running RC Dude server a couple versions above the Networked MT devices?

" ERROR: RoMON Agent not found. Add it to Managed List." Locks out Winbox ! Deleting the MicroTik folder in %appdata% used to fix it. Not now. Locked out of the entire network on my primary Windoze PC.Adding valid agents does not help. Also not clear about the Master Password on the Romon ...

Running 6.38.1 on a 20 ROS device Network. Since the Dude is Evolving, Is it Recommend to Run Dude 39.x.rc ( Latest ) on just the ROS+Dude-Hex Server
or will the older versions of ROS on Network cause issues? Best to use an entry in " IP Firewall Address List" for Discovery Blacklist ?

My Networks are evolving, Is there a way to move devices between maps? I've created a MAP call Legacy,
which I would like to park devices that are not active or expired. Maybe there is a better way, like a Hide flag??

Best Recommended practice to isolate subnets on the same router and provide an address list to be routed?
Make custom route firewalls or just make custom routes in the route table. I would want to block entire subnet except a few hosts.

I setup a unique /24 Subnet for UniFi cams+NVR's with 20 fixed IP's. I think the NVR scans for cams on the entire
subnet and the result is 254 address with 00:00:00 Macs in the IP ARC Table.
Is there a way to clear these w/o Reboot? Is there a way to stop the Null entries? ROS 6.38