BGP Capability Code 128 is deprecated . Read this: https://www.rfc-editor.org/rfc/rfc8810.html Ask Juniper TAC to read it too. Juniper is at fault here, they should remove code 128 features fully. Juniper has bad history with BGP safety measures: https://blog.benjojo.co.uk/post/bgp-path-attributes-...

Hi .. i am getting problem to up eBGP in between MikroTik and Juniper .. Following debug found at Mikrotik side.. Error : Unsupported capability received, code: 128 Log: bgp1-1 {l_addr: 10.200.241.162, r_addr: 10.200.241.161} Starter {openOk: false} Unsupported capability received, code: 128 what do...

yes.. Mikrotik version 6.46 is working to insert ipv6 prefix in radacct table

I am also getting same issue, once one ospf path goes down then mpls forwarding table does not update by another igp path .
MPLS forwarding table is work after ldp restart manually.
Does anyone know the solution of this issue?

Thanks @mrz for your replay.
I think it's big problem for MPLS Mikrotik, wheres other routers (JUNIPER and CISCO) are supported ECMP LDP.
Does MikroTik have any plan to fix the problem?

I have two sides A and B , both side are connected by two equal-cost paths running on OSPF. OSPF making ECMP but when running MPLS I see mpls forwarding table make only one nest-hop, where i added both paths in LDP interface. so mikrotik MPLS does not support ECMP ? or how i will fix the problem? an...

hi,
once I disabled MPLS then winbox working is well . So where is the issue that's why winbox does not work properly after enable MPLS?

Dear all, when I am running MPLS then all is working fine except wibox and webfig connection. Router internal processes are working fine when I am checking via telnet and ssh , only I face the below issue when i trying to connecting winbox and webfig.So i don't know where is the problem in managing ...

Problem has been solved by using below command, connection limit by per IP from one network block
/ip firewall filter
add action=drop chain=forward comment="TCP Connection Limits" connection-limit=200,32 protocol=tcp src-address=172.21.4.0/23 tcp-flags=syn


Thanks
Sajib Nandi

Hi Zacharias,
Thanks for your replay.
I will check as per your instruction, I think it will be woked.

Thanks

Dear All , I want to limit connection as per users thats meanes per IP, i use below command in my mikrotik /ip firewall filter add action=drop chain=forward connection-limit=50,32 connection-state=established log=yes protocol=tcp src-address-list=192.168.1.0/24 but connection limit applied for total...

Dear Mikrotik support ,
How can I upgrade Mikrotik demo License L1 to L4
Today I brought a license L4 which Mikrotik has L1.
when I paste this new Key system--> License .. its not upgrade
I need help regarding this issue.

Thanks
Sajib Nandi

How can I send SMS from Mikrotik using GSM modem? I did it before, but now it is not working.. [admin@MikroTik] /port> print Flags: I - inactive # DEVICE NAME CHANNELS USED-BY BAUD-RATE 0 1:2 usb1 I used the below script: /tool sms send port=usb1 channel=1 message=Hi phone-number=*********** If anyo...

When I want to try up ospf with mikrotik to juniper then Mikrotik router take more time to up ospf neighbors with Juniper: Error: Database description packet has different master status flag new master flag=false I checked ospf timers in both router MIkrotik and juniper and found same values are set...

Hi Tomaskir, Now we are facing more winbox default port attack in our every mikrotik router massively although we are not using winbox default port 8291 and also have firewall block this port. If you have any suggestion to me for prevent this attack then I appreciate you. please check this link: htt...

check using below command,

/queue simple move [find name=queue-Name] [:pick [find] 0]