CAP: HAP AX Lite default CAP configuration = no firewall CAPsMAN: HAP AX2 quite complex config, 2 bridges (intranet and guests), Using combination of RAW and ordinary FW rules, but this config is working on non Wave2 routers and CAPs. I can only recall I had to add unicast to the local Src. Address ...

Hi there, while doing some troubleshooting I wanted to avoid writing excesive amount of data to the Tiks flash, so used the packet sniffer streaming feature. It worked quite well for most of the packets, but didn't for the ones arround the MTU size. I write arround the MTU size above on purpose, bec...

Hello to everyone, yestarday I was at my friends house to fix his WAN connection. His router is running on the 7.4.1 version. The original commands used to configure the WAN IP address and static route were like this: /ip address add address=192.168.88.48/32 interface=ether1 network=192.168.88.0 /ip...

@heindelange you have saved me man, thanks a lot ;) I was really lost and couldn't find what was wrong for two days, until I found your post today. I am running 3 different SSIDs connected via 3 separate datapaths to 3 separate bridge interfaces, so I had to set the multicast-helper to full in 3 con...

@normis
any chance you or someone from your company could find time to answer my questions?

And I have one idea which might help with the transparency.
What about showing the information about a running CAC scan in the WiFi interfaces table?
In a way similar to my mspaint artwork
take care!

Hi, apologies for reopening year old thread, but IMHO it makes sense to have the information in one thread. Yesterday I stuck several hours fixing something what wasn't broken. I have configured CAPsMAN on my friends HapAClite and experienced quite strange behavior at least for me, because it have n...

I wasn't able to find it either and I guess this would also help the security a lot, so I am voting for an option to print out the fingerprint of the current host key

thanks

so am I wrong?

thanks for any comment

PiGeon

Hi, I am trying to automate deployment of the let'sencrypt certificate from a windows to my Mikrotik router. I am using posh-ssh module and its invoke-SSHcommand commandlet. The commands are executed successfully, but the issue I am having is, that the exit-code is always 0, even if I have a typo in...

I can confirm that the Winbox 3.10 is working even with the latest 15019 build.
Winbox 3.9 didn't work on this build.

PiGeon