Community discussions

MikroTik App
  4. RouterOS
  5. General

Netinstall stuck at "Waiting for RouterBOARD..."

Post Reply
 
minfrin
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 66
Joined: Sat May 09, 2009 2:20 am

Netinstall stuck at "Waiting for RouterBOARD..."

Sat Oct 07, 2023 7:26 pm

Been stuck trying to un-brick a CAP XL ac, and have not got netinstall to work.

Most specifically, netinstall hangs having done this:
Code: Select all
[root@netinstall ~]# ./netinstall-cli -a 192.168.88.1 routeros-7.11.2-arm.npk 
Version: 7.12rc1(2023-10-05 06:32:41)
Interface Mask: 255.255.255.0
Using Client IP: 192.168.88.1
Using Server IP: 192.168.88.2
Starting PXE server
Waiting for RouterBOARD...
I have a dedicated virtual machine running Rocky9 that is installed for the sole purpose of netinstall.

The network is configured as follows:
Code: Select all
[root@netinstall ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 52:54:00:d7:28:34 brd ff:ff:ff:ff:ff:ff
    inet 192.168.88.2/24 brd 192.168.88.255 scope global noprefixroute enp1s0
       valid_lft forever preferred_lft forever
    inet6 fe80::5054:ff:fed7:2834/64 scope link 
       valid_lft forever preferred_lft forever
3: enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 52:54:00:6d:44:7b brd ff:ff:ff:ff:ff:ff
The CAP XL ac is connected through an RB5009. The netinstall virtual machine sees bootp traffic as below. I have confirmed that the MAC address matches the MAC address printed on the outside of the bricked device.
Code: Select all
16:16:06.489445 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 18:fd:74:3e:d7:b0 (oui Unknown), length 300
16:16:06.689581 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 18:fd:74:3e:d7:b0 (oui Unknown), length 300
16:16:06.889717 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 18:fd:74:3e:d7:b0 (oui Unknown), length 300
16:16:07.089877 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 18:fd:74:3e:d7:b0 (oui Unknown), length 300
16:16:07.290036 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 18:fd:74:3e:d7:b0 (oui Unknown), length 300
16:16:07.490184 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 18:fd:74:3e:d7:b0 (oui Unknown), length 300
Looking at the netinstall process, it appears to have forked itself, one process listens on port "commplex-main", the second listens on "bootps" and "tftp":
Code: Select all
[root@netinstall ~]# ps -auxwww | grep netinstall
root       48231  0.0  0.0  44088   208 ttyS0    S    17:16   0:00 ./netinstall-cli -a 192.168.88.1 routeros-7.11.2-arm.npk
root       48232  0.0  0.0  44088    44 ttyS0    S    17:16   0:00 ./netinstall-cli -a 192.168.88.1 routeros-7.11.2-arm.npk
root       48238  0.0  0.0   6408  2188 ttyS0    S+   17:16   0:00 grep --color=auto netinstall
[root@netinstall ~]# lsof -p 48231
COMMAND     PID USER   FD   TYPE DEVICE SIZE/OFF    NODE NAME
netinstal 48231 root  cwd    DIR  253,0     4096 4194434 /root
netinstal 48231 root  rtd    DIR  253,0      235     128 /
netinstal 48231 root  txt    REG  253,0 44954972 4207421 /root/netinstall-cli
netinstal 48231 root    0u   CHR   4,64      0t0      94 /dev/ttyS0
netinstal 48231 root    1u   CHR   4,64      0t0      94 /dev/ttyS0
netinstal 48231 root    2u   CHR   4,64      0t0      94 /dev/ttyS0
netinstal 48231 root    3u  IPv4  75332      0t0     UDP *:commplex-main 
[root@netinstall ~]# lsof -p 48232
COMMAND     PID USER   FD   TYPE DEVICE SIZE/OFF    NODE NAME
netinstal 48232 root  cwd    DIR  253,0     4096 4194434 /root
netinstal 48232 root  rtd    DIR  253,0      235     128 /
netinstal 48232 root  txt    REG  253,0 44954972 4207421 /root/netinstall-cli
netinstal 48232 root    0u   CHR   4,64      0t0      94 /dev/ttyS0
netinstal 48232 root    1u   CHR   4,64      0t0      94 /dev/ttyS0
netinstal 48232 root    2u   CHR   4,64      0t0      94 /dev/ttyS0
netinstal 48232 root    3u  IPv4  76463      0t0     UDP *:bootps 
netinstal 48232 root    4u  IPv4  76465      0t0     UDP *:tftp 
[root@netinstall ~]#
There is no firewall:
Code: Select all
[root@netinstall ~]# iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
[root@netinstall ~]#
Strace shows we're stuck at this point:
Code: Select all
sendto(4, [{nlmsg_len=20, nlmsg_type=RTM_GETADDR, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=2, nlmsg_pid=0}, {ifa_family=AF_UNSPEC, ...}], 20, 0, NULL, 0) = 20
recvfrom(4, [[{nlmsg_len=76, nlmsg_type=RTM_NEWADDR, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=2, nlmsg_pid=48248}, {ifa_family=AF_INET, ifa_prefixlen=8, ifa_flags=IFA_F_PERMANENT, ifa_scope=RT_SCOPE_HOST, ifa_index=if_nametoindex("lo")}, [[{nla_len=8, nla_type=IFA_ADDRESS}, inet_addr("127.0.0.1")], [{nla_len=8, nla_type=IFA_LOCAL}, inet_addr("127.0.0.1")], [{nla_len=7, nla_type=IFA_LABEL}, "lo"], [{nla_len=8, nla_type=IFA_FLAGS}, IFA_F_PERMANENT], [{nla_len=20, nla_type=IFA_CACHEINFO}, {ifa_prefered=4294967295, ifa_valid=4294967295, cstamp=130, tstamp=130}]]], [{nlmsg_len=88, nlmsg_type=RTM_NEWADDR, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=2, nlmsg_pid=48248}, {ifa_family=AF_INET, ifa_prefixlen=24, ifa_flags=IFA_F_PERMANENT, ifa_scope=RT_SCOPE_UNIVERSE, ifa_index=if_nametoindex("enp1s0")}, [[{nla_len=8, nla_type=IFA_ADDRESS}, inet_addr("192.168.88.2")], [{nla_len=8, nla_type=IFA_LOCAL}, inet_addr("192.168.88.2")], [{nla_len=8, nla_type=IFA_BROADCAST}, inet_addr("192.168.88.255")], [{nla_len=11, nla_type=IFA_LABEL}, "enp1s0"], [{nla_len=8, nla_type=IFA_FLAGS}, IFA_F_PERMANENT|IFA_F_NOPREFIXROUTE], [{nla_len=20, nla_type=IFA_CACHEINFO}, {ifa_prefered=4294967295, ifa_valid=4294967295, cstamp=545, tstamp=545}]]]], 8192, MSG_DONTWAIT, NULL, NULL) = 164
recvfrom(4, [[{nlmsg_len=72, nlmsg_type=RTM_NEWADDR, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=2, nlmsg_pid=48248}, {ifa_family=AF_INET6, ifa_prefixlen=128, ifa_flags=IFA_F_PERMANENT, ifa_scope=RT_SCOPE_HOST, ifa_index=if_nametoindex("lo")}, [[{nla_len=20, nla_type=IFA_ADDRESS}, inet_pton(AF_INET6, "::1")], [{nla_len=20, nla_type=IFA_CACHEINFO}, {ifa_prefered=4294967295, ifa_valid=4294967295, cstamp=130, tstamp=130}], [{nla_len=8, nla_type=IFA_FLAGS}, IFA_F_PERMANENT]]], [{nlmsg_len=72, nlmsg_type=RTM_NEWADDR, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=2, nlmsg_pid=48248}, {ifa_family=AF_INET6, ifa_prefixlen=64, ifa_flags=IFA_F_PERMANENT, ifa_scope=RT_SCOPE_LINK, ifa_index=if_nametoindex("enp1s0")}, [[{nla_len=20, nla_type=IFA_ADDRESS}, inet_pton(AF_INET6, "fe80::5054:ff:fed7:2834")], [{nla_len=20, nla_type=IFA_CACHEINFO}, {ifa_prefered=4294967295, ifa_valid=4294967295, cstamp=545, tstamp=545}], [{nla_len=8, nla_type=IFA_FLAGS}, IFA_F_PERMANENT]]]], 8192, MSG_DONTWAIT, NULL, NULL) = 144
recvfrom(4, [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=2, nlmsg_pid=48248}, 0], 8192, MSG_DONTWAIT, NULL, NULL) = 20
close(4)                                = 0
setsockopt(3, SOL_SOCKET, SO_BINDTODEVICE, "enp1s0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 32) = 0
writev(1, [{iov_base="Waiting for RouterBOARD...", iov_len=26}, {iov_base="\n", iov_len=1}], 2Waiting for RouterBOARD...
) = 27
recvfrom(3,
Am I correct in understanding that seeing the bootp incoming traffic means that the CAP XL ac is in etherboot mode, and is correctly broadcasting bootp packets?

Why does netinstall hang?
Top
 
minfrin
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 66
Joined: Sat May 09, 2009 2:20 am

Re: Netinstall stuck at "Waiting for RouterBOARD..."

Sat Oct 07, 2023 8:15 pm

There are multiple ways for firewalls to break things. In the case of Rocky9 you need to disable the firewall like this:
Code: Select all
[root@netinstall ~]# service firewalld stop
Top
 
User avatar
tangent
Forum Guru
Forum Guru
Posts: 1659
Joined: Thu Jul 01, 2021 3:15 pm
Contact:
Contact tangent

Re: Netinstall stuck at "Waiting for RouterBOARD..."

Sat Oct 07, 2023 10:13 pm

You needn't be so heavy-handed. My Netinstall on EL9 guide shows a more enlightened path. You may find that it helps you with more than the firewalling aspect.
Top
Post Reply

Who is online

Users browsing this forum: ariux, krisz and 74 guests
  4. RouterOS
  5. General