I have multiple ISP with public IP, i can only reach default gateway 1 ISP public IP, how can i reach all public IPs?

WAN1 1.1.1.1 disatance 1 default gateway = reachable
WAN2 2.2.2.2 distance 2 = unreachable remotely to open winbox of 80/http
WAN3 3.3.3.3 distance 3 = same result unreachable

you must fix your routing, because probably when you try to reach 2.2.2.2 the route reply by 1.1.1.1 that is unexpected...

you must fix your routing, because probably when you try to reach 2.2.2.2 the route reply by 1.1.1.1 that is unexpected...

do you have a sample config? i have tried setting up Rules and Routing but still not showing up, i can see torch have packets but no response from web view.

If you currently don't use any mangle rules assigning routing-mark and you don't have any routing tables except the default one, use the following:

If you use RouterOS 6:
/ip route add routing-mark=via-wan2 gateway=gw.ip.of.wan2
/ip route rule add src-address=own.ip.of.wan2 action=lookup-only-in-table table=via-wan2

If you use RouterOS 7:
/routing/table/add name=via-wan2 fib
/ip/route/add routing-table=via-wan2 gateway=gw.ip.of.wan2
/routing/rule/add src-address=own.ip.of.wan2 action=lookup-only-in-table table=via-wan2