How can i make this network so all my clients on all AP can ping each other,
and how to configure a internet on network from internet server 192.168.1.1

Help me please!!

What is your subnet....??

AP 1 = 192.168.44.1/24
AP 2 = 192.168.51.1/24
AP(main) = 192.168.2.1/24
ruter relej(wireles ruter in client mode) = 192.168.1.2/24
Internet server = 192.168.1.1/24
Lan network = 192.168.1.10/24

On Lan network are computers in that range of IP address (192.168.10-192.168.1.255/24)

I'm sorry i didn't write it before.

You can masquerade your Client Network network with parent network as well as Route will work

You can masquerade your Client Network network with parent network as well as Route will work

Can you explain it to me?
I don't understand how?

Please send your complete router IP details <Ether wise>and connectivity Detais <Ether to Ether>

Please send your complete router IP details <Ether wise>and connectivity Detais <Ether to Ether>

Hmm...
If you min IP details and route details of mikrotik Ican't because i didn't setup it yet.
I was wondering if it is posible to make this network or we need to have some other schema so we can buy the proper equipment.
The picture is shema how we intend to make it but i was wondering that this will not work so
i have decide to ask you for help.
So insted of IP details and route can you write me a shema on how would i do it.
The Internet server will be main server for internet so i was thinking put there a maikrotik whit 2 ethernet card one for Lan network and scond for internet and i'll have masquarade on that ethernet card.
Now how would i set up the routes so we all be one network where clients can ping each other and whaen they want internet i will setup hotspot on that internet server so when they want to go on internet the hotspot server on that internet server will control that.

I hope you understand it.

If you min IP details and route details of mikrotik Ican't because i didn't setup it yet.
I was wondering if it is posible to make this network

It is certainly POSSIBLE to make RouterOS be a router.

or we need to have some other schema so we can buy the proper equipment.
The picture is shema how we intend to make it but i was wondering that this will not work so
i have decide to ask you for help.

What you have drawn is a very easy setup that will work just fine.

So insted of IP details and route can you write me a shema on how would i do it.
The Internet server will be main server for internet so i was thinking put there a maikrotik whit 2 ethernet card one for Lan network and scond for internet and i'll have masquarade on that ethernet card.
Now how would i set up the routes so we all be one network where clients can ping each other and whaen they want internet i will setup hotspot on that internet server so when they want to go on internet the hotspot server on that internet server will control that.

The "how to" configure part is in the documentation. It is sounding like you are wanting a "how to" not for MT, but for "building an IP network". You can look here: http://www.learntcpip.com/ for a free tutorial....or here: http://www.mikrotik.com/consultants.html for someone who will happily assist.

I hope you understand it.

Yes...I think I do.

The "how to" configure part is in the documentation.

Please what section of manual or can you post the link?
Thank you!

The "how to" configure part is in the documentation.

Please what section of manual or can you post the link?

Your configuration request is from all over the manual...
Adding IPs, hotspot, firewall (for the NAT) and likely others...

The manual is located here (for 2.9): http://www.mikrotik.com/testdocs/ros/2.9/
If you want a complete configuration, I can certainly provide one (that is part of what I do for a living), as I am certain others can do, but I'd suggest finding a consultant to help you. It will cost you some money, but it will be done correctly that way and, depending on who you hire, they may be able to train you a little on how they did it.